OHM KSC-Missile-Row v2 HI-RES and Default-res FIX

[OrbitHangar]

Author: felux

This Add-On fixes the "KSC-Missile-Row Ver2" by algol to use it with the dafault Orbiter 2010 textures and the HI-RES KSC by kukanotas.

This add-on overwrites the stock, <ORBITER>\Config\Earth\Base\Canaveral.cfg file. If you want to keep a backup copy it anywhere.

This Fix places the Lauch Pads and some buildings almost at the position seen in the textures.
Thanks to algol for his work of placing over thousands of objects. 

Included are the Basic and Full Installation each for the Default and for the HI-RES textures.
You can Find these examples in the <ORBITER>\Doc\KSC-Missile-Row Ver2 Hi-Res-FIX\ folder.

By Default the Full-Installation for HI-RES KSC will be installed. This requires you to install all the following add-ons:
following files are used for the Basic and Full Installation.
SLF MDD  by kayl669
OPF  by kayl669
K-LC-39-Rep-v2  by kev33
following will be used only by the Full Installation.
LC40 41  by Kev33
LC39 (Apollo Era)  by Kev33
LC37  by Kev33
LC36AB  by Kev33
LC 34  by Kev33
LC19  by Kev33
LC17  by Kev33
LC14  by Kev33
LC5  by Kev33
and install the HI-RES KSC by kukanotas to use the default Installation and HI-RES textures.
And off couse you need to install the KSC Missile-Row Ver 2 by algol.

UPDATE 1.01

• New archive to fix extracting problems

DOWNLOAD

 

[ky]

For some reason I cant open the file.My .rar extracter says the file refuses to open.

 

[orb]

For some reason I cant open the file.My .rar extracter says the file refuses to open.

Opens and extracts just fine with 7-zip. :shrug:

 

[FeLUX]

For some reason I cant open the file.My .rar extracter says the file refuses to open.

i've tested with 7-Zip and WinRAR both worked here. dont know what you are using?

 

[C3PO]

Works in ALZip too.

 

[ky]

Free Rar extract frog.

 

[FeLUX]

i've uploaded a new file it should fix your extraction probloem

 

[ky]

It works,thanks!

 

[orb]

Explanation why it might not be previously compatible with your dearchiver:
-- The previous version of the .rar archive (which was smaller) used LZMA compression (native to 7-zip), the current one uses native RAR compression.

 

[ky]

Ok thanks.

 

[N757QQ]

--EDIT-- I just realized that I needed to install the rocket / craft / ship files. I missed the links in the secondary files. Leaving this for anyone else that misses it, if that's alright. --EDIT--

I just went through the install step by step, but am getting an error when trying to start any of the newly available flights within Orbiter's launch menu.

My log file:

**** Orbiter.log
Build Aug 30 2010 [v.100830]
Timer precision: 4.05217e-007 sec
Found 0 joystick(s)
Devices enumerated: 6
Devices accepted: 5
==> RGB Emulation
==> Direct3D HAL
==> Direct3D T&L HAL
==> Direct3D HAL (NVIDIA GeForce GTX 260M  )
==> Direct3D T&L HAL (NVIDIA GeForce GTX 260M  )
Module AtlantisConfig.dll .... [Build 100830, API 100830]
Module AtmConfig.dll ......... [Build 100830, API 100830]
Module DGConfig.dll .......... [Build ******, API 060425]
Module DGConfigurator.dll .... [Build 100830, API 100830]
Module OrbiterSound.dll ...... [Build ******, API 060425]
---------------------------------------------------------------
>>> WARNING: Obsolete API function used: oapiRegisterMFDMode
At least one active module is accessing an obsolete interface function.
Addons which rely on obsolete functions may not be compatible with
future versions of Orbiter.
---------------------------------------------------------------
Module AeroBrakeMFD.dll ...... [Build ******, API 100830]
Module AttitudeMFD.dll ....... [Build ******, API 060425]
Module BaseSyncMFD.dll ....... [Build ******, API 060425]
Module InterMFD55.dll ........ [Build 100826, API 100704]
Module LaunchMFD.dll ......... [Build 110619, API 100830]
Module LunarTransferMFD.dll .. [Build 100621, API 100603]
Module Map3DMFD.dll .......... [Build 101102, API 100830]
Module RendezvousMFD.dll ..... [Build ******, API 050206]
Module transx.dll ............ [Build ******, API 060425]
Module WarpDriveMFD-Mk2.dll .. [Build 100808, API 100606]

**** Creating simulation session
DirectDraw interface OK
Direct3D interface OK
Graphics: Viewport: Fullscreen 1440 x 900 x 32
Graphics: Hardware T&L capability: Yes
Graphics: Z-buffer depth: 32 bit
Graphics: Active lights supported: 8
Loading 15382 records from star database
Module Sun.dll ............... [Build 100830, API 100830]
VSOP87(E) Sun: Precision 1e-006, Terms 554/6634
Module Mercury.dll ........... [Build 100830, API 100830]
VSOP87(B) Mercury: Precision 1e-005, Terms 167/7123
Module Venus.dll ............. [Build 100830, API 100830]
Module VenusAtm2006.dll ...... [Build 100830, API 100830]
VSOP87(B) Venus: Precision 1e-005, Terms 79/1710
Module Earth.dll ............. [Build 100830, API 100830]
Module EarthAtmJ71G.dll ...... [Build 100830, API 100830]
VSOP87(B) Earth: Precision 1e-008, Terms 2564/2564
Module Moon.dll .............. [Build 100830, API 100830]
ELP82: Precision 1e-005, Terms 116/829
Module Mars.dll .............. [Build 100830, API 100830]
Module MarsAtm2006.dll ....... [Build 100830, API 100830]
VSOP87(B) Mars: Precision 1e-005, Terms 405/6400
Module Phobos.dll ............ [Build ******, API 060425]
Module Deimos.dll ............ [Build ******, API 060425]
Module Galsat.dll ............ [Build 100217, API 100215]
Module Jupiter.dll ........... [Build 100830, API 100830]
VSOP87(B) Jupiter: Precision 1e-006, Terms 1624/3625
Module Io.dll ................ [Build 100217, API 100215]
Module Europa.dll ............ [Build 100217, API 100215]
Module Ganymede.dll .......... [Build 100217, API 100215]
Module Callisto.dll .......... [Build 100217, API 100215]
Module Satsat.dll ............ [Build 100215, API 100212]
Module Saturn.dll ............ [Build 100830, API 100830]
VSOP87(B) Saturn: Precision 1e-006, Terms 2904/6365
Module Mimas.dll ............. [Build 100215, API 100212]
SATSAT Mimas: Terms 113
Module Enceladus.dll ......... [Build 100215, API 100212]
SATSAT Enceladus: Terms 33
Module Tethys.dll ............ [Build 100215, API 100212]
SATSAT Tethys: Terms 101
Module Dione.dll ............. [Build 100215, API 100212]
SATSAT Dione: Terms 59
Module Rhea.dll .............. [Build 100215, API 100212]
SATSAT Rhea: Terms 68
Module Titan.dll ............. [Build 100215, API 100212]
SATSAT Titan: Terms 100
Module Iapetus.dll ........... [Build 100215, API 100212]
SATSAT Iapetus: Terms 605
Module Uranus.dll ............ [Build 100830, API 100830]
VSOP87(B) Uranus: Precision 1e-006, Terms 1827/5269
Module Miranda.dll ........... [Build ******, API 060425]
Module Ariel.dll ............. [Build ******, API 060425]
Module Umbriel.dll ........... [Build ******, API 060425]
Module Titania.dll ........... [Build ******, API 060425]
Module Oberon.dll ............ [Build ******, API 060425]
Module Neptune.dll ........... [Build 100830, API 100830]
VSOP87(B) Neptune: Precision 1e-006, Terms 391/2024
Finished initialising world
Module Spacecraft2.dll ....... [Build ******, API 050206]
---------------------------------------------------------------
>>> WARNING: Obsolete API function used: VESSEL::SetBankMomentScale
At least one active module is accessing an obsolete interface function.
Addons which rely on obsolete functions may not be compatible with
future versions of Orbiter.
---------------------------------------------------------------
>>> ERROR: No vessel class configuration file found for:
---------------------------------------------------------------
>>> ERROR: nSaturn1B
>>> [Vessel::OpenConfigFile | .\Vessel.cpp | 252]
---------------------------------------------------------------
>>> TERMINATING <<<

The error is obvious, I think, from the bottom few lines of text. My issue is that I am not sure if there is another issue within the main body of the text, nor am I sure how to fix the issue at the bottom.

Any help would be great. My apologies in advance for being the naive new guy.

 

[jimd]

Installation Problem

I am not very familiar with surface bases and consequently am having some difficulty in getting this to install correctly.

I have tried to follow the directions but I end up with a situation where all the new pads include the standard orbiter pad under (yellow tile with a green circle and pad number) underneath the new pad or just setting in the middle of nowhere.

I think this has to do with the base.cfg file but I did use the modifications suggested in the original add-on is that correct?

Any help would be appreciated.

 

[FeLUX]

it should be the canaveral.cfg wich causes your problem.
at the end, after instaling everythig else, you replace the existing Canaveral.cfg with my new one.
My suggestion is to install every new Pad but if you want some smaller, then you should find some .cfg files in the Doc directory to be used for installations without all pads and with the stock textures of Orbiter.

 

[boogabooga]

This is great, and thank you for going through the tedium of putting this together.

I installed and followed the directions. However, I have one strange issue. When I install this mod, the shorelines of the little ponds around LC39B are highlighted in thick black outlines.

Without the mod:



With the mod (I am aware that the service tower is missing. I commented it out of the config. This has nothing to do with the problem AFAIK) :



See the difference? What can be causing this? I know this is a tiny wiggle, but it is noticeable in screenshots of the ascending shuttle that I am trying to take.

 

[orb]

What can be causing this?

"With the mod" is using lower resolution surface tiles and that's causing more pronounced shore outlines.

 

[boogabooga]

If I don't install ANY new textures, but the config files, meshes, etc., I still get the dark outlined shores, but the base objects are all white.

 

[orb]

The problem isn't with texture files, but the SURFTILELIST section in the configuration file. Copy that section from "Without the mod" Canaveral.cfg and replace with it the one in "With the mod" Canaveral.cfg.

 

[boogabooga]

Thank you. It seems to be an issue in the commented section.

 

[markweasal]

ive got an idea for you

why not just update allthose files that are needed for this addon and combine them into one whole center file size may be reduced and we only need to download one file insted of 20

 

[tblaxland]

why not just update allthose files that are needed for this addon and combine them into one whole center file size may be reduced and we only need to download one file insted of 20

Because:
1. That would violate the copyright of the authors of those addons.
2. It makes it difficult for the authors of those addons to provide support because they lose control of the versions of their addon that are available.