Project Space Transportation System 2016

So here is actually what I have found: When installing the STS_Payloads_version2.01 everything goes to crap after extracting it into the orbiter directory. Earth turns gray and the Launchpad is gone.
 
Yes, the Shuttle fleet earth cfg messes things up.

But can you load the shuttle in scenario editor?

I know there is in the works a new install
 
gattispilot said:
Yes, the Shuttle fleet earth cfg messes things up.

But can you load the shuttle in scenario editor?

I know there is in the works a new install
Click to expand...
I didn't load the earth cfg file. It's a file from STS payloads 2.01 that is causing problems.

By scenario editor, do you mean the scenario editor that is available one the scenario has already launched?
 
gattispilot said:
Yes, the Shuttle fleet earth cfg messes things up.

But can you load the shuttle in scenario editor?

I know there is in the works a new install
Click to expand...
1730681205423.png
After doing all of the steps again, I am able to load into the scenarios but This is what I see. I did not extract the Earth.CFG file from ShuttleFleet. This error occurred after extracting STS Payloads. 2.01.... what would you recommend I do?
 
Ok. So the shuttle loads, But the cfg is an issue. If you have a good orbiter just copy the earth .cfg and paste it in your current orbiter.

I think I only use the Payload 2.01 for meshes and not the earth.cfg
 
BradyBaseball13 said:
View attachment 41113
After doing all of the steps again, I am able to load into the scenarios but This is what I see. I did not extract the Earth.CFG file from ShuttleFleet. This error occurred after extracting STS Payloads. 2.01.... what would you recommend I do?
Click to expand...
If you have identified the STS Payloads 2.01 as the culprit.....note that there are 2 STS Payloads addons to be installed in succession. One is STS_Payloads_version2.01.zip. The next one is STS Payloads Expansion Pack for Fleet V4.8 (STSPayloads2010R0.zip). This latter is actually a replacement of the former, except 3 folders: Meshes, Textures and Textures2. Please refer to STSPayloads2010R0 manual where there is a chapter called "simplifying the installation" or alike.
So, just unzip the STS_Payloads_version2.01.zip in a folder somewhere (elsewhere than base Orbiter2016 folder) then copy and paste into the main Orbiter2016 folder only the above 3 folders. Then just continue installation of the STS Payloads Expansion Pack for Fleet V4.8 (STSPayloads2010R0.zip) and so on.

Let us know if it works. We will try our best to help at every step if needed.
 
gattispilot said:
Ok. So the shuttle loads, But the cfg is an issue. If you have a good orbiter just copy the earth .cfg and paste it in your current orbiter.

I think I only use the Payload 2.01 for meshes and not the earth.cfg
Click to expand...
Just so other people could know how to troubleshoot this: I had to replace the Earth.CFG and Sol.CFG files.

I also had to replace the Canaveral.CFG in the base file (Config/Earth/Base).

Then for the HD launch complex I manually had to put it in the scenario and copy the position from another scenario.

I am still running into some problems with payloads not showing up. (See picture from the STS-41D Launch Scenario)
1730742877245.png
 
Eddie C. said:
If you have identified the STS Payloads 2.01 as the culprit.....note that there are 2 STS Payloads addons to be installed in succession. One is STS_Payloads_version2.01.zip. The next one is STS Payloads Expansion Pack for Fleet V4.8 (STSPayloads2010R0.zip). This latter is actually a replacement of the former, except 3 folders: Meshes, Textures and Textures2. Please refer to STSPayloads2010R0 manual where there is a chapter called "simplifying the installation" or alike.
So, just unzip the STS_Payloads_version2.01.zip in a folder somewhere (elsewhere than base Orbiter2016 folder) then copy and paste into the main Orbiter2016 folder only the above 3 folders. Then just continue installation of the STS Payloads Expansion Pack for Fleet V4.8 (STSPayloads2010R0.zip) and so on.

Let us know if it works. We will try our best to help at every step if needed.
Click to expand...
Oh thanks for the reply, I just replied as you were writing that. I was able to solve the spherical graphics issue, but now payloads are not loading. I did extract both in the correct order originally.
 
BradyBaseball13 said:
Just so other people could know how to troubleshoot this: I had to replace the Earth.CFG and Sol.CFG files.

I also had to replace the Canaveral.CFG in the base file (Config/Earth/Base).

Then for the HD launch complex I manually had to put it in the scenario and copy the position from another scenario.

I am still running into some problems with payloads not showing up. (See picture from the STS-41D Launch Scenario)
View attachment 41125
Click to expand...
Thanks. So on the payloads. Can you post the scn and the log
 
You bet. Log:
**** Orbiter.log
000000.000: Build Aug 28 2016 [v.160828]
000000.000: Timer precision: 1e-007 sec
000000.000: Found 3 joystick(s)
000000.000: Module AtlantisConfig.dll .... [Build 160828, API 160828]
000000.000: Module AtmConfig.dll ......... [Build 160828, API 160828]
000000.000: Module DGConfigurator.dll .... [Build 160828, API 160828]
000000.000: Module OrbiterSound.dll ...... [Build 200811, API 160828]
000000.000: Module ScnEditor.dll ......... [Build 160828, API 160828]
000000.000: ---------------------------------------------------------------
BaseDir : D:\Users\Brayden\Desktop\Orbiter 2016\
ConfigDir : D:\Users\Brayden\Desktop\Orbiter 2016\Config\
MeshDir : D:\Users\Brayden\Desktop\Orbiter 2016\Meshes\
TextureDir : D:\Users\Brayden\Desktop\Orbiter 2016\Textures\
HightexDir : D:\Users\Brayden\Desktop\Orbiter 2016\Textures2\
ScenarioDir: D:\Users\Brayden\Desktop\Orbiter 2016\Scenarios\
000000.000: ---------------------------------------------------------------
D3D9 DLLs : C:\WINDOWS\SYSTEM32\d3dx9_43.dll [v 9.29.952.3111]
: C:\WINDOWS\SYSTEM32\d3d9.dll [v 10.0.22621.3672]
000000.000: ---------------------------------------------------------------
000000.000: Module D3D9Client.dll ........ [Build 211009, API 160828]
000000.000: Module Multistage2015_MFD.dll [Build 170506, API 160828]
000000.000: Module DX9ExtMFD.dll ......... [Build 211009, API 160828]
000000.000: Module Rcontrol.dll .......... [Build 160828, API 160828]
000000.000: Module Meshdebug.dll ......... [Build 160828, API 160828]
000000.000: Module PylonMFD.dll .......... [Build ******, API 060425]
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: oapiRegisterMFDMode
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
000000.000: Module GPCMFD.dll ............ [Build 111222, API 100830]
000000.000:
000000.000: **** Creating simulation session
000000.000: D3D9: [DirectX 9 Initialized]
D3D9: 3D-Adapter.............. : NVIDIA GeForce RTX 3060 Ti
D3D9: MaxTextureWidth......... : 16384
D3D9: MaxTextureHeight........ : 16384
D3D9: MaxTextureRepeat........ : 8192
D3D9: VolTexAddressCaps....... : 0x3F
D3D9: NumSimultaneousRTs...... : 4
D3D9: VertexDeclCaps.......... : 0x30F
D3D9: MiscCaps................ : 0x2FCEF2
D3D9: XNA Math Support........ : Yes
D3D9: Vertex Texture.......... : Yes
D3D9: Separate AlphaBlend..... : Yes
D3D9: Shadow Mapping.......... : Yes
D3D9: D3DFMT_A16B16G16R16F.... : Yes
D3D9: D3DFMT_A32B32G32R32F.... : Yes
D3D9: D3DFMT_D32F_LOCKABLE.... : Yes
D3D9: D3DFMT_A2R10G10B10...... : Yes
D3D9: D3DFMT_L8............... : Yes
D3D9: D3DDTCAPS_DEC3N......... : No
D3D9: D3DDTCAPS_FLOAT16_2..... : Yes
D3D9: D3DDTCAPS_FLOAT16_4..... : Yes
D3D9: Runs under WINE......... : No
D3D9: D3D9Build Date.......... : 211009
D3D9: Available Texture Memory : 4075 MB
000000.000: D3D9: [3DDevice Initialized]
000000.000: D3D9: [Loading Constellations]
000000.000: D3D9: [D3D9Client Initialized]
000000.000: Module Sun.dll ............... [Build 160828, API 160828]
VSOP87(E) Sun: Precision 1e-006, Terms 554/6634
000000.000: Module Mercury.dll ........... [Build 160828, API 160828]
VSOP87(B) Mercury: Precision 1e-005, Terms 167/7123
000000.000: Module Venus.dll ............. [Build 160828, API 160828]
000000.000: Module VenusAtm2006.dll ...... [Build 160828, API 160828]
VSOP87(B) Venus: Precision 1e-005, Terms 79/1710
000000.000: Module Earth.dll ............. [Build 160828, API 160828]
000000.000: Module EarthAtmJ71G.dll ...... [Build 160828, API 160828]
VSOP87(B) Earth: Precision 1e-008, Terms 2564/2564
============================ ERROR: ===========================
Parse error from base definition file for Cape Canaveral: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject::ParseError | .\Baseobj.cpp | 184]
===============================================================
============================ ERROR: ===========================
Parse error from base definition file for Cape Canaveral: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject::ParseError | .\Baseobj.cpp | 184]
===============================================================
000000.000: BaseObject: Parse error 2
============================ ERROR: ===========================
Parse error from base definition file for ZZA - Zaragoza: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject::ParseError | .\Baseobj.cpp | 184]
===============================================================
============================ ERROR: ===========================
Parse error from base definition file for ZZA - Zaragoza: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject::ParseError | .\Baseobj.cpp | 184]
===============================================================
000000.000: BaseObject: Parse error 2
000000.000: Module Moon.dll .............. [Build 160828, API 160828]
ELP82: Precision 1e-005, Terms 116/829
000000.000: Module Mars.dll .............. [Build 160828, API 160828]
000000.000: Module MarsAtm2006.dll ....... [Build 160828, API 160828]
VSOP87(B) Mars: Precision 1e-005, Terms 405/6400
000000.000: Module Phobos.dll ............ [Build ******, API 060425]
000000.000: Module Deimos.dll ............ [Build ******, API 060425]
000000.000: Module Galsat.dll ............ [Build 160828, API 160828]
000000.000: Module Jupiter.dll ........... [Build 160828, API 160828]
VSOP87(B) Jupiter: Precision 1e-006, Terms 1624/3625
000000.000: Module Io.dll ................ [Build 160828, API 160828]
000000.000: Module Europa.dll ............ [Build 160828, API 160828]
000000.000: Module Ganymede.dll .......... [Build 160828, API 160828]
000000.000: Module Callisto.dll .......... [Build 160828, API 160828]
000000.000: Module Satsat.dll ............ [Build 160828, API 160828]
000000.000: Module Saturn.dll ............ [Build 160828, API 160828]
VSOP87(B) Saturn: Precision 1e-006, Terms 2904/6365
000000.000: Module Mimas.dll ............. [Build 160828, API 160828]
SATSAT Mimas: Terms 113
000000.000: Module Enceladus.dll ......... [Build 160828, API 160828]
SATSAT Enceladus: Terms 33
000000.000: Module Tethys.dll ............ [Build 160828, API 160828]
SATSAT Tethys: Terms 101
000000.000: Module Dione.dll ............. [Build 160828, API 160828]
SATSAT Dione: Terms 59
000000.000: Module Rhea.dll .............. [Build 160828, API 160828]
SATSAT Rhea: Terms 68
000000.000: Module Titan.dll ............. [Build 160828, API 160828]
SATSAT Titan: Terms 100
000000.000: Module Iapetus.dll ........... [Build 160828, API 160828]
SATSAT Iapetus: Terms 605
000000.000: Module Uranus.dll ............ [Build 160828, API 160828]
VSOP87(B) Uranus: Precision 1e-006, Terms 1827/5269
000000.000: Module Miranda.dll ........... [Build ******, API 060425]
000000.000: Module Ariel.dll ............. [Build ******, API 060425]
000000.000: Module Umbriel.dll ........... [Build ******, API 060425]
000000.000: Module Titania.dll ........... [Build ******, API 060425]
000000.000: Module Oberon.dll ............ [Build ******, API 060425]
000000.000: Module Neptune.dll ........... [Build 160828, API 160828]
VSOP87(B) Neptune: Precision 1e-006, Terms 391/2024
000000.000: Finished initialising world
000000.000: Module Multistage2015.dll .... [Build 170506, API 160828]
000000.000: Multistage Version: 170506
000000.000: Load State Started
000000.000: ET41D: Guidance File present: Config\Multistage2015\Guidance\guidance_shuttle_STS-41Dreal.txt
000000.000: ET41D: Orbit Call Found! Targets: Apogee:354000.0 Perigee:346000.0 Inclination:28.5 Mode:-1.0 GT initial Pitch: 0.0 Abside:346000.0
000000.000: ET41D: Config File: D:\Users\Brayden\Desktop\Orbiter 2016\Config\Multistage2015\Space-Shuttle_STS-41Dnew1.ini
000000.000: ET41D: Number of stages in the ini file: 1
000000.000: ET41D: Number of boosters group in the ini file: 2
000000.000: ET41D: Number of Payloads in the ini file: 1
000000.000: ET41D: Thrust in Real Position
000000.000: ET41D: Texture n.1 Loaded Exhaust_atsme
000000.000: ET41D: Texture n.2 Loaded Exhaust2
000000.000: ET41D: Texture n.3 Loaded 2016spaceshuttle/SLS_SRB_contrail
000000.000: ET41D: booster n. 1 Tank Added: 1006974.000 kg
000000.000: ET41D: booster n. 2 Tank Added: 0.000 kg
000000.000: ET41D: Stage n. 1 Tank Added: 728715.230 kg
000000.000: ET41D: Stage n. 1 Engines Exhaust Added--> number of engines: 3 , diameter: 2.000, position x: -1.600 y: 7.930 z: -26.880
000000.000: ET41D: Stage n. 1 Engines Exhaust Added--> number of engines: 3 , diameter: 2.000, position x: 1.600 y: 7.930 z: -26.880
000000.000: ET41D: Stage n. 1 Engines Exhaust Added--> number of engines: 3 , diameter: 2.000, position x: 0.000 y: 11.330 z: -26.030
000000.000: ET41D: Booster Group n.1 Engine Exhaust Stream Added: solidfuel_exhaust to engine n.1
000000.000: ET41D: Booster Group n.1 Engine Exhaust Stream Added: contrail4 to engine n.1
000000.000: ET41D: Booster Engines Exhaust Added--> Booster Group: 1 number of engines: 1 , diameter: 2.200, position x: 5.800 y: 0.000 z: -33.786
000000.000: ET41D: Booster Group n.1 Engine Exhaust Stream Added: solidfuel_exhaust to engine n.2
000000.000: ET41D: Booster Group n.1 Engine Exhaust Stream Added: contrail4 to engine n.2
000000.000: ET41D: Booster Engines Exhaust Added--> Booster Group: 1 number of engines: 1 , diameter: 2.200, position x: -5.800 y: 0.000 z: -33.786
000000.000: ET41D: Booster Engines Exhaust Added--> Booster Group: 2 number of engines: 3 , diameter: 2.000, position x: -1.650 y: 7.930 z: -27.880
000000.000: ET41D: Booster Engines Exhaust Added--> Booster Group: 2 number of engines: 3 , diameter: 2.000, position x: 1.550 y: 7.930 z: -27.880
000000.000: ET41D: Booster Engines Exhaust Added--> Booster Group: 2 number of engines: 3 , diameter: 2.000, position x: -0.050 y: 11.330 z: -27.030
000000.000: ET41D: Stage n.1 Mesh Preloaded: 2016spaceshuttle\tank\slwt_burnt
000000.000: ET41D: Stage n.1 Mesh Added Mesh: 2016spaceshuttle\tank\slwt_burnt @ x:-0.050 y:0.000 z:0.000
000000.000: ET41D: Booster Mesh Preloaded: 2016spaceshuttle\booster\rsrm_1
000000.000: ET41D: Booster Mesh Added Mesh: 2016spaceshuttle\booster\rsrm_1 @ x:6.000 y:0.000 z:-11.286
000000.000: ET41D: Booster Mesh Preloaded: 2016spaceshuttle\booster\rsrm_2
000000.000: ET41D: Booster Mesh Added Mesh: 2016spaceshuttle\booster\rsrm_2 @ x:-6.000 y:0.000 z:-11.286
000000.000: ET41D: Booster Mesh Preloaded: 2016spaceshuttle\tank\slwt_1
000000.000: ET41D: Booster Mesh Added Mesh: 2016spaceshuttle\tank\slwt_1 @ x:-0.050 y:0.000 z:0.000
000000.000: Load State Terminated
000000.000: Module EmptyModule.dll ....... [Build 170505, API 160828]
000000.000: Module MS_Camera.dll ......... [Build 170505, API 160828]
000000.000: MS_Camera: Target Vessel Loaded->STS-41D
000000.000: Module SPACESHUTTLE2016early.dll [Build 201214, API 160828]
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: VESSEL::CreateVariableDragElement
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
000000.000: Module Spacecraft3.dll ....... [Build ******, API 050206]
============================ ERROR: ===========================
Mesh file name not provided
[MeshManager::LoadMesh | .\Mesh.cpp | 1237]
===============================================================
D3D9: ERROR: D3D9Client::clbkStoreMeshPersistent() hMesh is NULL
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: VESSEL::SetBankMomentScale
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
============================ ERROR: ===========================
Mesh file name not provided
[MeshManager::LoadMesh | .\Mesh.cpp | 1237]
===============================================================
D3D9: ERROR: D3D9Client::clbkStoreMeshPersistent() hMesh is NULL
============================ ERROR: ===========================
Mesh file name not provided
[MeshManager::LoadMesh | .\Mesh.cpp | 1237]
===============================================================
D3D9: ERROR: D3D9Client::clbkStoreMeshPersistent() hMesh is NULL
============================ ERROR: ===========================
Mesh file name not provided
[MeshManager::LoadMesh | .\Mesh.cpp | 1237]
===============================================================
D3D9: ERROR: D3D9Client::clbkStoreMeshPersistent() hMesh is NULL
============================ ERROR: ===========================
Mesh file name not provided
[MeshManager::LoadMesh | .\Mesh.cpp | 1237]
===============================================================
D3D9: ERROR: D3D9Client::clbkStoreMeshPersistent() hMesh is NULL
000000.000: Module STS41DMPESS.dll ....... [Build 201130, API 160828]
000000.000: Module LC39A-1981.dll ........ [Build 100905, API 100830]
000000.000: Finished initialising status
000000.000: Finished initialising camera
000000.000: Finished setting up render state
000000.000: D3D9: [Scene Initialized]
000000.000: Post Creation Started
000000.000: ET41D: Gravity Turn Initial Pitch by user: 0.000 Calculated:70.050
000000.000: RESET PEG
000000.000: ET41D: Planet Reference Pressure = 101325.0 Pa Atmosphere Altitude Limit:2500.0 km
000000.000: Post Creation Terminated
000000.000: Finished initialising panels
000000.000: Venting Effect Added @: 0.000,9.000,-25.000 dir: 0.000,0.000,-1.000
000000.000: Venting Effect Added @: -1.500,8.000,-25.500 dir: 0.000,0.000,-1.000
000000.000: Venting Effect Added @: 1.500,8.000,-25.500 dir: 0.000,0.000,-1.000
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
000029.711: ET41D Booster n: 1 ignited @0.0
000029.721: Detached from Launchpad
000029.999: ET41D Stage n: 1 ignited @0.3
000037.178: LaunchPad Deleted from Scenery
000041.215: D3D9: [Session Closed. Scene deleted.]
000041.215: D3D9: [Destroy Render Window Called]
000041.215: **** Closing simulation session
 
SCN:

BEGIN_DESC
STS-41D


Mission: SBS-D; Satellite Business System SYNCOM IV-2; Solar Wing TELSTAR

Space Shuttle: Discovery (first mission of the orbiter)

Launch Pad: 39A

Launch Weight: 263,477 pounds

Launched: August 30, 1984 at 8:41:50 a.m. EDT

Landing: September 5, 1984 at 6:37:54 a.m. PDT

Landing Site: Edwards Air Force Base, Calif.

Runway: 17

Mission Duration: 6 days, 0 hours, 56 minutes, 4 seconds

Returned to KSC: September 10, 1984

Orbit Inclination: 28.5 degrees


Crew Members


Commander Henry W. Hartsfield, Jr., Pilot Michael L. Coats, Mission Specialists Judith A. Resnick, Steven A. Hawley, Richard M. Mullane and Payload Specialist Charles D. Walker


Mission Highlights


STS-41D Mission PatchThree satellites deployed during this mission: Satellite Business System SBS-D, SYNCOM IV-2 (also known as LEASAT2) and TELSTAR. The 102-foot-tall, 13-foot-wide Office of Application and Space Technology (OAST-1) solar wing extended from the payload bay. The wing carried different types of solar cells and extended to its full height several times. It demonstrated large lightweight solar arrays for a future in building large facilities in space such as a space station. Other payloads included were: Continuous Flow Electrophoresis System (CFES) Ill; Radiation Monitoring Equipment (RME); Shuttle Student Involvement Program (SSIP) experiment; lMAX camera, being flown for a second time; and an Air Force experiment, Cloud Logic to Optimize Use of Defense Systems (CLOUDS).

END_DESC

BEGIN_ENVIRONMENT
System Sol
Date MJD 45942.528704
END_ENVIRONMENT

BEGIN_FOCUS
Ship STS-41D
END_FOCUS

BEGIN_CAMERA
TARGET STS-41D
MODE Extern
POS 2.894099 178.528203 114.170998
TRACKMODE GlobalFrame
FOV 40.00
END_CAMERA

BEGIN_HUD
TYPE Orbit
REF AUTO
END_HUD

BEGIN_MFD Left
TYPE Surface
SPDMODE 1
END_MFD

BEGIN_MFD Right
TYPE Map
REF Earth
POS 0.00 0.00
END_MFD

BEGIN_MFD 3
TYPE Orbit
PROJ Frame
FRAME Ecliptic
REF Earth
END_MFD

BEGIN_VC
END_VC

BEGIN_SHIPS
ET41D:Multistage2015
STATUS Landed Earth
POS -80.6208630 28.6270927
HEADING 180.57
ALT 47.375
AROT 151.065 -8.240 4.530
ATTACHED 0:0,MS_LaunchPad_ET41D
AFCMODE 7
PRPLEVEL 0:1.000000 1:1.000000 2:1.000000
NAVFREQ 0 0 0 0
XPDR 0
CONFIG_FILE Config\Multistage2015\Space-Shuttle_STS-41Dnew1.ini
GUIDANCE_FILE Config\Multistage2015\Guidance\guidance_shuttle_STS-41Dreal.txt
CONFIGURATION 0
CURRENT_BOOSTER 1
CURRENT_STAGE 1
CURRENT_INTERSTAGE 1
CURRENT_PAYLOAD 1
FAIRING 0
MET -30.000
GNC_RUN 1
BATTERY 5400.000000
STAGE_IGNITION_TIME 0.000000
STAGE_STATE 1
TELEMETRY_FILE Config\Multistage2015\Telemetry\guidance_shuttle_STS-1.txt
ALT_STEPS 100.0,350.0,1400.0,35000.0
PEG_PITCH_LIMIT 35.000
PEG_MC_INTERVAL 0.100
RAMP
END
MS_LaunchPad_ET41D:EmptyModule
STATUS Landed Earth
POS -80.6041230 28.6086670
HEADING 0.00
ALT -2.000
AROT 151.065 -8.240 4.530
AFCMODE 7
NAVFREQ 0 0
END
MS_Camera:MS_Camera
STATUS Landed Earth
POS -80.6238630 28.6070927
HEADING 180.57
ALT 47.361
AROT -118.284 -4.474 171.752
AFCMODE 7
NAVFREQ 0 0
TARGET STS-41D
END
STS-41D:Shuttle2016BEARLY
STATUS Landed Earth
POS 61.6867493 -23.9783873
HEADING 277.88
ALT 303974.593
AROT 0.000 -0.000 0.000
ATTACHED 0:0,ET41D
AFCMODE 7
PRPLEVEL 0:0.923829
NAVFREQ 0 0
CONFIGURATION 3
GEAR 0 0.0000
HATCH 0 0.0000
ADTA 0 0.0000
SSMES 1 1.0000
PETD 1 1.0000
SETD 1 1.0000
OV 103
SPIN1
SPIN2
SPIN3
ORIGINAL
RMSARM
NOCHUTE
ARM_STATUS 0.5000 0.0151 0.0162 0.5000 0.5000 0.5000
Armtilt 0 0.0000 1 1.0000
PLB_CAM 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
PAYLOAD_MASS1 3.000
PAYLOAD_MASS2 0.000
PAYLOAD_MASS3 0.000
PL1_OFS 0.0000 -0.8000 3.2500
PL1_DIR 0.0000 1.0000 0.0000
PL1_ROT 0.0000 0.0000 1.0000
PL2_OFS 0.0000 -0.8000 0.2500
PL2_DIR 0.0000 1.0000 0.0000
PL2_ROT 0.0000 0.0000 1.0000
PL3_OFS 0.1000 0.5000 -6.5000
PL3_DIR 0.0000 1.0000 0.0000
PL3_ROT 1.0000 0.0000 0.0000
PL4_OFS 0.0000 0.2500 3.2500
PL4_DIR 0.0000 1.0000 0.0000
PL4_ROT 0.0000 0.0000 1.0000
PL5_OFS 0.0000 0.2500 0.2500
PL5_DIR 0.0000 1.0000 0.0000
PL5_ROT 0.0000 0.0000 1.0000
PL6_OFS 0.0000 0.0000 -3.2500
PL6_DIR 0.0000 1.0000 0.0000
PL6_ROT 0.0000 0.0000 1.0000
PL7_OFS 0.0000 -1.8000 7.1000
PL7_DIR 0.0000 1.0000 0.0000
PL7_ROT 0.0000 0.0000 1.0000
PL8_OFS 0.0000 1.2000 7.1800
PL8_DIR 0.0000 1.0000 0.0000
PL8_ROT 0.0000 0.0000 1.0000
PL9_OFS 0.0000 0.0000 0.0000
PL9_DIR 0.0000 1.0000 0.0000
PL9_ROT 0.0000 0.0000 1.0000
pl10_OFS 0.0000 0.0000 0.0000
pl10_DIR 0.0000 1.0000 0.0000
pl10_ROT 0.0000 0.0000 1.0000
ft_pad_att_pos 0.0000 0.7000 11.3210
ft_pad_att_dir 0.0000 1.0000 0.0000
ft_pad_att_rot 0.0000 0.0000 -1.0000
ft_pad_att1_pos 0.0000 0.7000 11.3210
ft_pad_att1_dir 0.0000 1.0000 0.0000
ft_pad_att1_rot 0.0000 0.0000 -1.0000
ft_pad_att2_pos 0.0000 0.7000 11.3210
ft_pad_att2_dir 0.0000 1.0000 0.0000
ft_pad_att2_rot 0.0000 0.0000 -1.0000
ft_pad_att3_pos 0.0000 0.7000 11.3210
ft_pad_att3_dir 0.0000 1.0000 0.0000
ft_pad_att3_rot 0.0000 0.0000 -1.0000
KEEL_CAM 0.1452 -1.5000 -1.3560
ET_CAM -2.0000 -2.8561 -7.3348
DOCK_CAM 0.0000 1.5800 10.1600
FLOOD1 0
FLOOD2 0
FLOOD3 0
FLOOD4 0
FLOOD5 0
FLOOD6 0
DOCK_LIGHT 0
AFT_LIGHT 0
RMSLIGHT 0
CARGO_STATIC_MESH STS_PAYLOADSNEW\STS41DSTATIC
END
SBS-4-ASE:STS_PAYLOADS\ASE
STATUS Landed Earth
POS 61.6867787 -23.9783952
HEADING 109.33
ALT 303974.864
AROT 0.000 -0.000 0.000
ATTACHED 0:4,STS-41D
AFCMODE 7
END
SBSD-ASE-DOOR:spacecraft\spacecraft3
STATUS Landed Earth
POS 61.6867790 -23.9783953
HEADING 109.33
ALT 303975.534
AROT 0.000 -0.000 0.000
ATTACHED 0:0,SBS-4-ASE
AFCMODE 7
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 2 0.999775
SEQ 1 2 0.999775
END
PAM-1:STS_PAYLOADS\PAM
STATUS Landed Earth
POS 61.6867784 -23.9783948
HEADING 109.33
ALT 303973.665
AROT 0.000 -0.000 0.000
ATTACHED 0:0,STS-41D
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
END
STAR-48B1:STS_PAYLOADS\EQUIP
STATUS Landed Earth
POS 61.6867784 -23.9783948
HEADING 109.33
ALT 303973.665
AROT 0.000 -0.000 0.000
ATTACHED 0:0,PAM-1
AFCMODE 7
END
STAR-30B1:STS_PAYLOADS\STAR
STATUS Landed Earth
POS 61.6867784 -23.9783948
HEADING 109.33
ALT 303973.665
AROT 0.000 -0.000 0.000
ATTACHED 0:0,STAR-48B1
AFCMODE 7
END
SBS-4:STS_PAYLOADS\HS-376
STATUS Landed Earth
POS 61.6867792 -23.9783951
HEADING 109.33
ALT 303975.944
AROT 0.000 -0.000 0.000
ATTACHED 0:0,STAR-30B1
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 -2 0.000000
SEQ 1 -2 0.000000
END
TELSTAR-3C-ASE:STS_PAYLOADS\ASE
STATUS Landed Earth
POS 61.6867516 -23.9783882
HEADING 109.33
ALT 303974.982
AROT 0.000 -0.000 0.000
ATTACHED 0:5,STS-41D
AFCMODE 7
END
TELSTAR-ASE-DOOR:spacecraft\spacecraft3
STATUS Landed Earth
POS 61.6867519 -23.9783883
HEADING 109.33
ALT 303975.652
AROT 0.000 -0.000 0.000
ATTACHED 0:0,TELSTAR-3C-ASE
AFCMODE 7
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 2 0.999734
SEQ 1 2 0.999734
END
PAM-2:STS_PAYLOADS\PAM
STATUS Landed Earth
POS 61.6867513 -23.9783878
HEADING 109.33
ALT 303973.783
AROT 0.000 -0.000 0.000
ATTACHED 0:2,STS-41D
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
END
STAR-48B2:STS_PAYLOADS\EQUIP
STATUS Landed Earth
POS 61.6867513 -23.9783878
HEADING 109.33
ALT 303973.783
AROT 0.000 -0.000 0.000
ATTACHED 0:0,PAM-2
AFCMODE 7
END
STAR-30B2:STS_PAYLOADS\STAR
STATUS Landed Earth
POS 61.6867513 -23.9783878
HEADING 109.33
ALT 303973.783
AROT 0.000 -0.000 0.000
ATTACHED 0:0,STAR-48B2
AFCMODE 7
END
TELSTAR-3C:STS_PAYLOADS\HS-376
STATUS Landed Earth
POS 61.6867521 -23.9783881
HEADING 109.33
ALT 303976.062
AROT 0.000 -0.000 0.000
ATTACHED 0:0,STAR-30B2
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 -2 0.000000
SEQ 1 -2 0.000000
END
LEASAT-2-ASE:STS_PAYLOADS\ASE3
STATUS Landed Earth
POS 61.6867078 -23.9783774
HEADING 109.33
ALT 303974.172
AROT 0.000 -0.000 0.000
ATTACHED 0:6,STS-41D
AFCMODE 7
END
ORBUS-7S:STS_PAYLOADS\APC
STATUS Landed Earth
POS 61.6866905 -23.9783731
HEADING 105.74
ALT 303975.348
AROT 0.000 -0.000 0.000
ATTACHED 0:3,STS-41D
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
END
PKM:STS_PAYLOADS\pylonPKM
STATUS Landed Earth
POS 61.6866977 -23.9783750
HEADING 105.74
ALT 303975.316
AROT 0.000 -0.000 0.000
ATTACHED 0:0,ORBUS-7S
AFCMODE 7
END
R-4D-10:STS_PAYLOADS\STAR
STATUS Landed Earth
POS 61.6867131 -23.9783789
HEADING 105.74
ALT 303975.249
AROT 0.000 -0.000 0.000
ATTACHED 0:0,PKM
AFCMODE 7
END
LEASAT-2:STS_PAYLOADS\LEASAT
STATUS Landed Earth
POS 61.6867131 -23.9783789
HEADING 105.74
ALT 303975.249
AROT 0.000 -0.000 0.000
ATTACHED 0:0,R-4D-10
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 -2 0.000000
SEQ 1 -2 0.000000
END
LEASAT-2-OnmiAntenna:STS_PAYLOADS\Onmi-Antenna
STATUS Landed Earth
POS 61.6867353 -23.9783846
HEADING 105.74
ALT 303975.153
AROT 0.000 -0.000 0.000
ATTACHED 0:0,LEASAT-2
AFCMODE 7
END
STS41DMPESS:STS41DMPESS
STATUS Landed Earth
POS 61.6868193 -23.9784054
HEADING 105.74
ALT 303974.397
AROT 0.000 -0.000 0.000
ATTACHED 0:7,STS-41D
AFCMODE 7
NAVFREQ 0 0
XPDR 468
ARRAY0 0 0.0000
ARRAY1 0 0.0000
ARRAY2 0 0.0000
END
LC39A:ISSR\LC39A-1981
STATUS Landed Earth
POS -80.6041280 28.6086350
HEADING 0.00
AFCMODE 7
PRPLEVEL 0:1.000000
THLEVEL 0:1.000000
NAVFREQ 0 0
RSS 0 1.0000 -1
WR 0 0.0000 1
VA 0 0.0000 1
TC 0 0.0000 1
PS_LVL 1.0000 0.0000 0.0000
TIMER 534.1121 84.1121 359.1121 519.1121 527.5121 530.6121 539.1121 0.0000
LIGHT 0
END
END_SHIPS

BEGIN_ReFuelMFD
SCENARIO_TREE
NAMED Computers
END_NODE
END_NODE
END

BEGIN_ExtMFD
END
 
Thanks. Do you see them in default graphics?

IN d3d9 you may need to move the cfg to the server folder?
 
gattispilot said:
gattispilot

Project Post in thread 'Space Transportation System 2016'

It might be due to the fact that the payload things Astro,... are sc3/4
copy the config/spacecraft folder and place here:
D:\Orbiter2016\Modules\Server\Config\spacecraft
  • Like

here is the sc3/4 issue. If it loads in default. then this might be the issue?
Click to expand...
That worked! thank you much! The solar array isn't there, I will try and track it down, but the others are there, thank you!
 
Weird I didn't see the OAST in the scn?
The 102-foot-tall, 13-foot-wide Office of Application and Space Technology (OAST-1) solar wing extended from the payload bay.
 
For the OAST-1 of STS-41D:

The vessel is in the scenario. It is this one: STS41DMPESS:STS41DMPESS

@BradyBaseball13 please check the following:
  • in the Config/Vessels folder there is a file named STS41DMPESS
  • in the Modules folder there is a file named STS41DMPESS.dll
  • in the Meshes/STS_PayloadsNEW folder are the following files: sts41dstatic.msh; sts41dMPESS.msh and sts41dARRAY.msh
 
Last but not least - related to above @gattispilot spacecraft3/4 problem. This is also solved by the mandatory step of creating the "symbolic links" for D3D9. Was this action perfomed?
If not - on the Orbiter launchpad, go the Video tab then in the presented window click Advanced. Then at the bottom of next window there is a button "Create symbolic links". This will put a "shortcut" of all Config into the Modules/Server folder.
 
Eddie C. said:
Last but not least - related to above @gattispilot spacecraft3/4 problem. This is also solved by the mandatory step of creating the "symbolic links" for D3D9. Was this action perfomed?
If not - on the Orbiter launchpad, go the Video tab then in the presented window click Advanced. Then at the bottom of next window there is a button "Create symbolic links". This will put a "shortcut" of all Config into the Modules/Server folder.
Click to expand...
When I tried to create the symbolic link before, it wouldn't let me and said "a non-empty config-directory already exists."
 
You must log in or register to reply here.

Similar threads

OvalDreamX
Project Dragonfly Redux
Replies
8
Views
3K
OvalDreamX
OvalDreamX
TorchDesigner
Discussion Orbiter User Requirements and Post-2024 Development
2
Replies
21
Views
18K
Lucy
Lucy
MaxBuzz
Project SK-1 space suit
Replies
1
Views
2K
N_Molson
N_Molson
DecoFox
SDK Question Virtual Cockpit best practices
Replies
9
Views
4K
misha.physics
misha.physics
Owenmck
New Release Kerbol System for Orbiter (KSO)
Replies
0
Views
2K
Owenmck
Owenmck
Back
Top