Jeremyxxx
Active member
Nice work with the Long March 3B!
Vessel Chang'e 4 Lander, Rover, Queqiao and Longjiang 1 and 2 Lunar probes
- Thread starter Jeremyxxx
- Start date
gattispilot
Addon Developer
Thats the one i used. But didn't do right in 2016
---------- Post added 12-22-18 at 07:16 AM ---------- Previous post was 12-21-18 at 08:46 PM ----------
So this is what I get:
you see the pad is in the ground
This is what I have:
https://drive.google.com/open?id=1XMu4vAtANxAPmLUQvZ6IJZECvPxR7ieg
Got to have the Manned Chinese Program
[ame="https://www.orbithangar.com/searchid.php?ID=3179"]China's Manned Space Program v1.5[/ame]
here is the log:
000000.000: Finished initialising world
000000.000: Module JSLC_pad.dll .......... [Build ******, API 060425]
000000.000: Module Multistage2015.dll .... [Build 170626, API 160828]
000000.000: Multistage Version: 170506
000000.000: Load State Started
000000.000: LM3B: Guidance File present: Config\Multistage2015\Guidance\SATURN5_GNC.txt
000000.000: LM3B: Orbit Call Found! Targets: Apogee:185000.0 Perigee:185000.0 Inclination:0.0 Mode:1.0 GT initial Pitch: 0.0 Abside:185000.0
000000.000: LM3B: Config File: C:\Orbiter2016\Config\Multistage2015\LongMarch3b.ini
000000.000: LM3B: Number of stages in the ini file: 3
000000.000: LM3B: Number of boosters group in the ini file: 1
000000.000: LM3B: Number of Payloads in the ini file: 0
000000.000: LM3B: This Rocket Has Fairing
000000.000: LM3B: Texture n.1 Loaded Exhaust_atsme
000000.000: LM3B: booster n. 1 Tank Added: 150984.000 kg
000000.000: LM3B: Stage n. 3 Tank Added: 18193.000 kg
000000.000: LM3B: Stage n. 2 Tank Added: 49400.000 kg
000000.000: LM3B: Stage n. 1 Tank Added: 37746.000 kg
000000.000: LM3B: Stage n.1 Engine Exhaust Stream Added: to engine n.1
000000.000: LM3B: Stage n.1 Engine Exhaust Stream Added: to engine n.1
000000.000: LM3B: Stage n. 1 Engines Exhaust Added--> number of engines: 4 , diameter: 0.700, position x: 0.000 y: 0.957 z: -24.000
000000.000: LM3B: Stage n.1 Engine Exhaust Stream Added: to engine n.2
000000.000: LM3B: Stage n.1 Engine Exhaust Stream Added: to engine n.2
000000.000: LM3B: Stage n. 1 Engines Exhaust Added--> number of engines: 4 , diameter: 0.700, position x: 0.000 y: -0.957 z: -24.000
000000.000: LM3B: Stage n.1 Engine Exhaust Stream Added: to engine n.3
000000.000: LM3B: Stage n.1 Engine Exhaust Stream Added: to engine n.3
000000.000: LM3B: Stage n. 1 Engines Exhaust Added--> number of engines: 4 , diameter: 0.700, position x: 0.957 y: 0.000 z: -24.000
000000.000: LM3B: Stage n.1 Engine Exhaust Stream Added: to engine n.4
000000.000: LM3B: Stage n.1 Engine Exhaust Stream Added: to engine n.4
000000.000: LM3B: Stage n. 1 Engines Exhaust Added--> number of engines: 4 , diameter: 0.700, position x: -0.957 y: 0.000 z: -24.000
000000.000: LM3B: Booster Group n.1 Engine Exhaust Stream Added: to engine n.1
000000.000: LM3B: Booster Group n.1 Engine Exhaust Stream Added: to engine n.1
000000.000: LM3B: Booster Engines Exhaust Added--> Booster Group: 1 number of engines: 0 , diameter: 0.700, position x: 0.000 y: 0.000 z: -7.650
000000.000: LM3B: Booster Group n.1 Engine Exhaust Stream Added: to engine n.2
000000.000: LM3B: Booster Group n.1 Engine Exhaust Stream Added: to engine n.2
000000.000: LM3B: Booster Engines Exhaust Added--> Booster Group: 1 number of engines: 0 , diameter: 0.700, position x: 0.000 y: 0.000 z: -7.650
000000.000: LM3B: Booster Group n.1 Engine Exhaust Stream Added: to engine n.3
000000.000: LM3B: Booster Group n.1 Engine Exhaust Stream Added: to engine n.3
000000.000: LM3B: Booster Engines Exhaust Added--> Booster Group: 1 number of engines: 0 , diameter: 0.700, position x: 0.000 y: 0.000 z: -7.650
000000.000: LM3B: Booster Group n.1 Engine Exhaust Stream Added: to engine n.4
000000.000: LM3B: Booster Group n.1 Engine Exhaust Stream Added: to engine n.4
000000.000: LM3B: Booster Engines Exhaust Added--> Booster Group: 1 number of engines: 0 , diameter: 0.700, position x: 0.000 y: 0.000 z: -7.650
000000.000: LM3B: Stage n.1 Mesh Preloaded: LongMarch3b\LM3B1stage
000000.000: LM3B: Stage n.1 Mesh Added Mesh: LongMarch3b\LM3B1stage @ x:0.000 y:0.000 z:0.000
000000.000: LM3B: Stage n.2 Mesh Preloaded: LongMarch3b\LM3B2stage
000000.000: LM3B: Stage n.2 Mesh Added Mesh: LongMarch3b\LM3B2stage @ x:0.000 y:0.000 z:0.000
000000.000: LM3B: Stage n.3 Mesh Preloaded: LongMarch3b\LM3B3stage
000000.000: LM3B: Stage n.3 Mesh Added Mesh: LongMarch3b\LM3B3stage @ x:0.000 y:0.000 z:0.000
000000.000: LM3B: Booster Mesh Preloaded: LongMarch3b\LM3BBooster1_1
000000.000: LM3B: Booster Mesh Added Mesh: LongMarch3b\LM3BBooster1_1 @ x:0.000 y:0.000 z:0.000
000000.000: LM3B: Booster Mesh Preloaded: LongMarch3b\LM3BBooster1_2
000000.000: LM3B: Booster Mesh Added Mesh: LongMarch3b\LM3BBooster1_2 @ x:0.000 y:0.000 z:0.000
000000.000: LM3B: Booster Mesh Preloaded: LongMarch3b\LM3BBooster1_3
000000.000: LM3B: Booster Mesh Added Mesh: LongMarch3b\LM3BBooster1_3 @ x:-0.000 y:0.000 z:0.000
000000.000: LM3B: Booster Mesh Preloaded: LongMarch3b\LM3BBooster1_4
000000.000: LM3B: Booster Mesh Added Mesh: LongMarch3b\LM3BBooster1_4 @ x:0.000 y:-0.000 z:0.000
000000.000: LM3B: Fairing Mesh Preloaded: LongMarch3b\LLM3Bfairing2_1
000000.000: LM3B: Fairing Mesh Added Mesh: LongMarch3b\LLM3Bfairing2_1 @ x:0.000 y:0.000 z:0.000
000000.000: LM3B: Fairing Mesh Preloaded: LongMarch3b\LLM3Bfairing2_2
000000.000: LM3B: Fairing Mesh Added Mesh: LongMarch3b\LLM3Bfairing2_2 @ x:-0.000 y:0.000 z:0.000
000000.000: Load State Terminated
000000.000: Module EmptyModule.dll ....... [Build 170626, API 160828]
000000.000: Finished initialising status
000000.000: Finished initialising camera
000000.000: Finished setting up render state
000000.000: Post Creation Started
000000.000: LM3B: Gravity Turn Initial Pitch by user: 0.000 Calculated:89.000
000000.000: RESET PEG
000000.000: LM3B: Planet Reference Pressure = 101325.0 Pa Atmosphere Altitude Limit:2500.0 km
000000.000: Post Creation Terminated
000000.000: Finished initialising panels
Jeremyxxx
Active member
Tried to test the rocket, but I got a CTD.
gattispilot
Addon Developer
Post log
Jeremyxxx
Active member
Tried to get the log, but ended up with a CTD as well.
gattispilot
Addon Developer
Weird. Something is wrong not sure what though.
Jeremyxxx
Active member
Can't wait for the mission to actually begin!
gattispilot
Addon Developer
So try this:
https://drive.google.com/open?id=1hCMEsxzP7z_LpMoGHzctzaQ2Z6LCXbV1
Not sure if I got the values correct. ONe launch fast and another just set on the pad firing
---------- Post added 12-23-18 at 07:20 AM ---------- Previous post was 12-22-18 at 04:56 PM ----------
So basing the values off this:
http://www.spaceflight101.net/long-march-3b.html
This is what I have for the INI. The thrust is in N so I think I have the correct amount. Not sure if on the booster it needed to be 4x?
you can see the pad and lights at wrong
https://drive.google.com/open?id=1hCMEsxzP7z_LpMoGHzctzaQ2Z6LCXbV1
Not sure if I got the values correct. ONe launch fast and another just set on the pad firing
---------- Post added 12-23-18 at 07:20 AM ---------- Previous post was 12-22-18 at 04:56 PM ----------
So basing the values off this:
http://www.spaceflight101.net/long-march-3b.html
This is what I have for the INI. The thrust is in N so I think I have the correct amount. Not sure if on the booster it needed to be 4x?
Code:
GNC_Debug=0
Telemetry=0
Focus=0
Thrust_real_pos=0
Vertical_Angle=0.000
[TEXTURE_LIST]
TEX_1=Exhaust_atsme
[BOOSTER_1]
N=4
MeshName=LongMarch3b\LM3BBooster1
Height=15.330
Diameter=2.250
EmptyMass=3000.000
FuelMass=37746.000
Thrust=2961600
angle=0.000
off=(0.000,0.000,0.000)
BurnTime=125.000
eng_1=(0.000,2.946,-23.7)
eng_diameter=0.700
ENG_PSTREAM1=exhaust
Speed=(15.000,0.000,0.000)
Rot_speed=(0.000,-0.400,0.000)
BurnDelay=0.000
Eng_tex=
Eng_pstream2=
[STAGE_1]
Height=23.270
Diameter=3.350
EmptyMass=12125.000
FuelMass=171775.000
Thrust=2961600.000
BurnTime=146.000
off=(0.000,0.000,0.000)
MeshName=LongMarch3b\LM3B1stage
eng_1=(0,-.9,-24)
eng_2=(-.9,0,-24)
eng_3=(0,.9,-24)
eng_4=(-.9,0,-248)
eng_diameter=0.700
PITCHTHRUST=56774532.400
YAWTHRUST=56774532.400
speed=(0.000,0.000,-10.000)
ENG_PSTREAM1=contrail
battery=1.500
Ignite_delay=0.010
Reignitable=1
Eng_tex=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Rot_speed=(0.000,0.000,0.000)
[STAGE_2]
MeshName=LongMarch3b\LM3B2stage
Diameter=3.350
Height=12.920
EmptyMass=3848.000
FuelMass=49400.000
Thrust=742000
BurnTime=178.000
ignite_delay=10.000
off=(0.000,0.000,0.000)
eng_1=(0.000,0,-.915)
eng_diameter=0.700
PITCHTHRUST=4663990.000
YAWTHRUST=4663990.000
battery=5.000
ullage_thrust=100000.000
ullage_N=4
ullage_angle=-22.500
ullage_pos=(4.200,0.000,-10.700)
ullage_dir=(0.200,0.000,-1.000)
ullage_tex=Exhaust_atsme
ullage_length=5.000
ullage_diameter=1.000
ullage_anticipation=3.000
ullage_overlap=1.000
ullage_rectfactor=3.000
reignitable=1
Eng_tex=
Eng_pstream1=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Speed=(0.000,0.000,0.000)
Rot_speed=(0.000,0.000,0.000)
[FAIRING]
N=2
MeshName=LongMarch3b\LLM3Bfairing2
Diameter=10.000
Height=31.350
angle=0.000
off=(0.000,0.000,0.000)
EMPTYMASS=10683.000
speed=(25.000,0.000,0.000)
Module=Stage
Rot_Speed=(0.000,0.000,0.000)
Rot_speed(0,0.3,0)
[STAGE_3]
Meshname=LongMarch3b\LM3B3stage
Off=(0.000,0.000,0.000)
Height=12.380
Diameter=3.000
Thrust=156900.000
EmptyMass=2740.000
FuelMass=18193.000
Burntime=0.000
Eng_1=(0.75,0.000,8.700)
Eng_2=(-.75,0.000,8.700)
Reignitable=1
Eng_diameter=.700
Eng_tex=
Eng_pstream1=
Eng_pstream2=
Eng_dir=(0.000,0.000,0.000)
Module=
Speed=(0.000,0.000,0.000)
Rot_speed=(0.000,0.000,0.000)
Ignite_delay=0.010you can see the pad and lights at wrong
Last edited:
4throck
Enthusiast !
- Joined
- Jun 19, 2008
- Messages
- 3,502
- Reaction score
- 1,008
- Points
- 153
- Location
- Lisbon
- Website
- orbiterspaceport.blogspot.com
No, the .ini values are wrong. You need to add some cargo for the guidance to work and a 10ton fairing seems a bit too much....
Your reference seems good, I think you can try with those values.
Your reference seems good, I think you can try with those values.
gattispilot
Addon Developer
So I corrected the mass on the fairing.
But it just sits on the pad the engine fires but doesn't lift off.
Not sure about the cargo though.
---------- Post added at 02:41 PM ---------- Previous post was at 02:32 PM ----------
I also adjusted the thrust of the boosters as it is multiplied by the number:
Code:
[MISC]
cog=15.000
GNC_Debug=0
Telemetry=0
Focus=0
Thrust_real_pos=0
Vertical_Angle=0.000
[TEXTURE_LIST]
TEX_1=Exhaust_atsme
[BOOSTER_1]
N=4
MeshName=LongMarch3b\LM3BBooster1
Height=15.330
Diameter=2.250
EmptyMass=3000.000
FuelMass=37746.000
Thrust=2961600
angle=0.000
off=(0.000,0.000,0.000)
BurnTime=125.000
eng_1=(0.000,2.946,-23.7)
eng_diameter=0.700
ENG_PSTREAM1=exhaust
Speed=(15.000,0.000,0.000)
Rot_speed=(0.000,-0.400,0.000)
BurnDelay=0.000
Eng_tex=
Eng_pstream2=
[STAGE_1]
Height=23.270
Diameter=3.350
EmptyMass=12125.000
FuelMass=171775.000
Thrust=2961600.000
BurnTime=146.000
off=(0.000,0.000,0.000)
MeshName=LongMarch3b\LM3B1stage
eng_1=(0,-.9,-24)
eng_2=(-.9,0,-24)
eng_3=(0,.9,-24)
eng_4=(-.9,0,-248)
eng_diameter=0.700
PITCHTHRUST=56774532.400
YAWTHRUST=56774532.400
speed=(0.000,0.000,-10.000)
ENG_PSTREAM1=contrail
battery=1.500
Ignite_delay=0.010
Reignitable=1
Eng_tex=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Rot_speed=(0.000,0.000,0.000)
[STAGE_2]
MeshName=LongMarch3b\LM3B2stage
Diameter=3.350
Height=12.920
EmptyMass=3848.000
FuelMass=49400.000
Thrust=742000
BurnTime=178.000
ignite_delay=10.000
off=(0.000,0.000,0.000)
eng_1=(0.000,0,-.915)
eng_diameter=0.700
PITCHTHRUST=4663990.000
YAWTHRUST=4663990.000
battery=5.000
ullage_thrust=100000.000
ullage_N=4
ullage_angle=-22.500
ullage_pos=(4.200,0.000,-10.700)
ullage_dir=(0.200,0.000,-1.000)
ullage_tex=Exhaust_atsme
ullage_length=5.000
ullage_diameter=1.000
ullage_anticipation=3.000
ullage_overlap=1.000
ullage_rectfactor=3.000
reignitable=1
Eng_tex=
Eng_pstream1=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Speed=(0.000,0.000,0.000)
Rot_speed=(0.000,0.000,0.000)
[FAIRING]
N=2
MeshName=LongMarch3b\LLM3Bfairing2
Diameter=10.000
Height=31.350
angle=0.000
off=(0.000,0.000,0.000)
EMPTYMASS=1500
speed=(25.000,0.000,0.000)
Module=Stage
Rot_Speed=(0.000,0.000,0.000)
Rot_speed(0,0.3,0)
[STAGE_3]
Meshname=LongMarch3b\LM3B3stage
Off=(0.000,0.000,0.000)
Height=12.380
Diameter=3.000
Thrust=156900.000
EmptyMass=2740.000
FuelMass=18193.000
Burntime=0.000
Eng_1=(0.75,0.000,8.700)
Eng_2=(-.75,0.000,8.700)
Reignitable=1
Eng_diameter=.700
Eng_tex=
Eng_pstream1=
Eng_pstream2=
Eng_dir=(0.000,0.000,0.000)
Module=
Speed=(0.000,0.000,0.000)
Rot_speed=(0.000,0.000,0.000)
Ignite_delay=0.010Not sure about the cargo though.
---------- Post added at 02:41 PM ---------- Previous post was at 02:32 PM ----------
I also adjusted the thrust of the boosters as it is multiplied by the number:
Code:
[BOOSTER_1]
N=4
MeshName=LongMarch3b\LM3BBooster1
Height=15.330
Diameter=2.250
EmptyMass=3000.000
FuelMass=37746.000
Thrust=740400
angle=0.000
off=(0.000,0.000,0.000)
BurnTime=125.000
eng_1=(0.000,2.946,-23.7)
eng_diameter=0.700
ENG_PSTREAM1=exhaust
Speed=(15.000,0.000,0.000)
Rot_speed=(0.000,-0.400,0.000)
BurnDelay=0.000
Eng_tex=
Eng_pstream2=4throck
Enthusiast !
- Joined
- Jun 19, 2008
- Messages
- 3,502
- Reaction score
- 1,008
- Points
- 153
- Location
- Lisbon
- Website
- orbiterspaceport.blogspot.com
Try this, it works by the numbers:
LM3B.INI
For scenario:
LM3B_guidance.txt
The payload is just for show, using the shenzhou mesh with 1500kg.
And I didn't fix the exausts and other effects
You will need a good guidance, but the default autopilot will get you into orbit with fuel to spare.
The scenario needs altitude adjustment, but it's a start.
Hope it helps!
I do like this rocket, great job so far!
LM3B.INI
Code:
[MISC]
cog=20.000
GNC_Debug=0
Telemetry=0
Focus=1
Thrust_real_pos=1
Vertical_Angle=0.000
[TEXTURE_LIST]
TEX_1=Exhaust_atsme
[PARTICLESTREAM_1]
Name=vent
amin = 1e-006
amax = 0.1
atmslowdown = 3
growthrate = 1.2
lifetime = 4.5
lmax = 0.5
lmin = 0
srcrate = 15
srcsize = 0.4
v0 = 1
ltype = EMISSIVE
atmsmap = ATM_PLOG
levelmap = LVL_PSQRT
tex = contrail
[PARTICLESTREAM_2]
NAME=mach
SRCSIZE=7
SRCRATE=120
V0=12
SRCSPREAD=0
LIFETIME=0.25
GROWTHRATE=6
ATMSLOWDOWN=0
LTYPE=EMISSIVE
LEVELMAP=LVL_PSQRT
LMIN=0
LMAX=4
ATMSMAP=ATM_PLOG
AMIN=0.7e-7
AMAX=1
TEX= contrail
[FX_VENT]
pstream=vent
off_1=(4.2,0,35)
dir_1=(1,0,0)
time_fin_1=-15
off_2=(0,4.2,15)
dir_2=(0,1,0)
time_fin_2=-25
[FX_MACH]
pstream=mach
mach_min=0.9
mach_max=1.1
off_1=(0,0,70)
off_2=(6.7775,0,20)
off_3=(-6.7775,0,20)
dir=(0,0,-1)
[BOOSTER_1]
N=4
MeshName=LongMarch3b\LM3BBooster1
Height=15.330
Diameter=2.250
THRUST=813000
EMPTYMASS=3000
FUELMASS=37750
BURNTIME=125
angle=0.000
off=(0.000,0.000,0.000)
eng_1=(0.000,0.000,0.000)
eng_diameter=0.700
ENG_PSTREAM1=exhaust
Speed=(15.000,0.000,0.000)
Rot_speed=(0.000,-0.400,0.000)
BurnDelay=0.000
Eng_tex=
Eng_pstream2=
[STAGE_1]
Height=23.270
Diameter=3.350
THRUST=2961600
EMPTYMASS=12125
FUELMASS=171775
BURNTIME=146
off=(0.000,0.000,0.000)
MeshName=LongMarch3b\LM3B1stage
eng_1=(-1.835,3.313,-32.408)
eng_2=(-1.835,-3.313,-32.408)
eng_3=(1.835,-3.313,-32.408)
eng_4=(1.835,3.313,-32.408)
eng_diameter=0.700
speed=(0.000,0.000,-10.000)
ENG_PSTREAM1=contrail
Reignitable=0
Eng_tex=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Rot_speed=(0.000,0.000,0.000)
[STAGE_2]
MeshName=LongMarch3b\LM3B2stage
Diameter=3.350
Height=12.920
THRUST=742000.000
EMPTYMASS=3848.000
FUELMASS=49608.000
BURNTIME=178.000
off=(0.000,0.000,0.000)
eng_1=(0.000,-1.350,-12.500)
eng_diameter=2.700
reignitable=0
Eng_tex=
Eng_pstream1=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Rot_speed=(0.000,0.000,0.000)
speed=(0.000,0.000,-10.000)
[FAIRING]
N=2
MeshName=LongMarch3b\LLM3Bfairing2
Diameter=4.000
Height=9.560
angle=0.000
off=(0.000,0.000,0.000)
EMPTYMASS=1500.000
speed=(25.000,0.000,0.000)
Module=Stage
Rot_Speed=(0.000,0.000,0.000)
[STAGE_3]
Meshname=LongMarch3b\LM3B3stage
Off=(0.000,0.000,0.000)
Height=12.380
Diameter=3.000
Thrust=156900.000
EmptyMass=2740.000
FuelMass=18193.000
Burntime=469.000
Eng_1=(0.000,0.000,0.000)
Eng_2=(0.000,0.000,0.000)
Reignitable=1
eng_diameter=2.700
Eng_tex=
Eng_pstream1=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
speed=(0.000,0.000,-10.000)
Rot_speed=(0.000,0.000,0.000)
[PAYLOAD_1]
MESHNAME=shenzhou\shenzhou1
OFF=(0.000,0.000,21.690)
HEIGHT=9.250
DIAMETER=2.800
MASS=1500.000
MODULE=spacecraft\spacecraft4
NAME=Shenzhou1
SPEED=(0.000,0.000,0.500)
RENDER=1
Rotation=(0.000,0.000,0.000)
Rot_speed=(0.000,0.000,0.000)
Live=0For scenario:
Code:
BEGIN_DESC
END_DESC
BEGIN_ENVIRONMENT
System Sol
Date MJD 58475.1448205196
Help CurrentState_img
END_ENVIRONMENT
BEGIN_FOCUS
Ship LM3B
END_FOCUS
BEGIN_CAMERA
TARGET LM3B
MODE Extern
POS 20.376873 -8.007067 -118.215120
TRACKMODE AbsoluteDirection
FOV 60.00
END_CAMERA
BEGIN_SHIPS
LM3B:Multistage2015
STATUS Landed Earth
POS 100.2914100 40.9578800
HEADING 47.37
ALT -0.046
AROT 41.418 7.754 139.418
ATTACHED 0:0,MS_LaunchPad_LM3B
AFCMODE 7
PRPLEVEL 0:1.000000 1:1.000000 2:1.000000 3:1.000000
NAVFREQ 0 0 0 0
XPDR 0
CONFIG_FILE Config\Multistage2015\LM3B.ini
GUIDANCE_FILE Config\Multistage2015\LM3B_guidance.txt
CONFIGURATION 0
CURRENT_BOOSTER 1
CURRENT_STAGE 1
CURRENT_INTERSTAGE 1
CURRENT_PAYLOAD 1
FAIRING 1
MET -3.400
STAGE_IGNITION_TIME 0.000000
STAGE_STATE 2
ALT_STEPS 100.0,350.0,1400.0,35000.0
PEG_PITCH_LIMIT 35.000
PEG_MC_INTERVAL 0.100
RAMP
END
JSLC_pad:JSLC_pad
STATUS Landed Earth
POS 100.2914100 40.9578800
HEADING 47.37
ALT 2.000
AROT 138.011 40.135 -169.836
AFCMODE 7
NAVFREQ 0 0
END
MS_LaunchPad_LM3B:EmptyModule
STATUS Landed Earth
POS 100.2914100 40.9578800
HEADING 47.37
ALT -0.021
AROT 41.418 7.754 139.418
AFCMODE 7
NAVFREQ 0 0
END
END_SHIPSLM3B_guidance.txt
Code:
-4=engine(0,100,4)
0=engine(100,100,0.1)
20=Orbit(195,315)
100=Les()
101=fairing()The payload is just for show, using the shenzhou mesh with 1500kg.
And I didn't fix the exausts and other effects
You will need a good guidance, but the default autopilot will get you into orbit with fuel to spare.
The scenario needs altitude adjustment, but it's a start.
Hope it helps!
I do like this rocket, great job so far!
gattispilot
Addon Developer
Thanks
So now this:
https://drive.google.com/open?id=1MHOA-l4PNof8QBlSw1QQLWUeSQ3Gf2hE
Not too sure about the launch time. Date is right 12/7/18
making the payload might be a challenge
[ame="https://twitter.com/aj_fi/status/998152851305172993"]https://twitter.com/aj_fi/status/998152851305172993[/ame]
So now this:
https://drive.google.com/open?id=1MHOA-l4PNof8QBlSw1QQLWUeSQ3Gf2hE
Not too sure about the launch time. Date is right 12/7/18
making the payload might be a challenge
[ame="https://twitter.com/aj_fi/status/998152851305172993"]https://twitter.com/aj_fi/status/998152851305172993[/ame]
Jeremyxxx
Active member
After testing out the Long March 3B, We get to work on Queqiao and the two Longjiangs before Chang'e 4 could be done as an addon
gattispilot
Addon Developer
Not sure the sizes. Working on rover
Jeremyxxx
Active member
We'll figure out the height and width for the other spacecraft.
gattispilot
Addon Developer
Yes that is true.
So this is what IO made for the rover:
No clue if it is the right size.
Jeremyxxx
Active member
Yutu 2! Nice work on the rover!
gattispilot
Addon Developer
Not sure how all this should stack.
