Vessel HMX Transfer Vehicle (XV)

[Star Voyager]

Not so much a full add-on so much as an animated mesh with textures request. I have a .ini config file based on the old t/Space CXV add-on from Kodiak and have it set as a payload for Multistage2015 Titan 23G, an adapter mesh would also be required. Also, what's a good program to help determine the aerodynamic parameters specified in a Spacecraft4 config file?

[CONFIG]
MESHNAME="kodiakspace\cxvr"
SIZE=2.9
EMPTY_MASS=2057
FUEL_MASS=1912
MAIN_THRUST=7740
ATTITUDE_THRUST=445
ISP=2600
PMI=(4,4,5)
CROSS_SECTION=(5.72,3,4.62)
COG=0
PITCH_MOMENT_SCALE=0.00001
BANK_MOMENT_SCALE=0.00001
ROT_DRAG=(0.5,1,1)
FOCUS=0

[EX_MAIN_0]
OFF=(-1.498152,0.000000,-1.795481)
DIR=(0,0,-1)
LENGTH=3
WIDTH=.12

[EX_MAIN_1]
OFF=(1.501848,0.000000,-1.795820)
DIR=(0,0,-1)
LENGTH=3
WIDTH=.12

[EX_ATT_0]
OFF=(1.980943,-0.149359,-2.180050)
DIR=(0,-1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=z
ROT_CW=1

[EX_ATT_1]
OFF=(1.980943,-0.149359,-2.080051)
DIR=(0,-1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=z
ROT_CW=1

[EX_ATT_2]
OFF=(2.124641,-0.051870,-2.053936)
DIR=(1,0,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=y
ROT_CW=1

[EX_ATT_3]
OFF=(2.124641,0.048130,-2.053936)
DIR=(1,0,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=y
ROT_CW=1

[EX_ATT_4]
OFF=(1.980943,0.150641,-2.180539)
DIR=(0,1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=z
ROT_CW=0

[EX_ATT_5]
OFF=(1.980943,0.150641,-2.080540)
DIR=(0,1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=z
ROT_CW=0

[EX_ATT_6]
OFF=(-1.980943,-0.149359,-2.180050)
DIR=(0,-1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=z
ROT_CW=0

[EX_ATT_7]
OFF=(-1.980943,-0.149359,-2.080051)
DIR=(0,-1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=z
ROT_CW=0

[EX_ATT_8]
OFF=(-2.124641,-0.051870,-2.053936)
DIR=(-1,0,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=y
ROT_CW=0

[EX_ATT_9]
OFF=(-2.124641,0.048130,-2.053936)
DIR=(-1,0,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=y
ROT_CW=0

[EX_ATT_10]
OFF=(-1.980943,0.150641,-2.180539)
DIR=(0,1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=z
ROT_CW=1

[EX_ATT_11]
OFF=(-1.980943,0.150641,-2.080540)
DIR=(0,1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=z
ROT_CW=1

[EX_ATT_12]
OFF=(1.980943,-0.149359,-2.180050)
DIR=(0,-1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=x
ROT_CW=1

[EX_ATT_13]
OFF=(1.980943,-0.149359,-2.080051)
DIR=(0,-1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=x
ROT_CW=1

[EX_ATT_14]
OFF=(-1.980943,-0.149359,-2.180050)
DIR=(0,-1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=x
ROT_CW=1

[EX_ATT_15]
OFF=(-1.980943,-0.149359,-2.080051)
DIR=(0,-1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=x
ROT_CW=1

[EX_ATT_16]
OFF=(1.980943,0.150641,-2.180539)
DIR=(0,1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=x
ROT_CW=0

[EX_ATT_17]
OFF=(1.980943,0.150641,-2.080540)
DIR=(0,1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=x
ROT_CW=0

[EX_ATT_18]
OFF=(-1.980943,0.150641,-2.180539)
DIR=(0,1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=x
ROT_CW=0

[EX_ATT_19]
OFF=(-1.980943,0.150641,-2.080540)
DIR=(0,1,0)
LENGTH=1
WIDTH=0.03
ROT_AXIS=x
ROT_CW=0

[DOCK_0]
POS=(0,0,-2)
DIR=(0,0,-1)
ROT=(0,1,0)

HMX XV Briefing