Project Apollo Help

[TheXxBestxX]

oh sorry. here is the correct .scn and picture:

BEGIN_DESC
Apollo 11 on a free-return trajectory to the Moon.
END_DESC

BEGIN_ENVIRONMENT
System Sol_NASSP5
Date MJD 40418.6824010047
END_ENVIRONMENT

BEGIN_FOCUS
Ship AS-506
END_FOCUS

BEGIN_CAMERA
TARGET AS-506
MODE Cockpit
FOV 60.00
END_CAMERA

BEGIN_HUD
TYPE Orbit
END_HUD

BEGIN_MFD Left
TYPE User
MODE TransX
FNumber 3
Int 0
Orbit True
Vector 6240386.15367 531319.935937 2493397.02069
Vector -2487.66117264 1505.38200929 10410.6912872
Double 3.98600439969e+014
Double 40418.6823919
Handle Earth
Handle NULL
Handle Moon
Select Target
0 Moon
Autoplan
0 0
Plan type
0 0
Plan
0 0
Plan
0 0
Plan
0 0
Select Minor
0 None
Manoevre mode
0 0
Base Orbit
0 0
Prograde vel.
4 0
Man. date
5 40418.6823897
Outward vel.
1 0
Ch. plane vel.
6 0
Intercept with
0 0
Graph projection
0 0
Scale to view
0 0
Advanced
0 0
Finvars
Finish BaseFunction
Int 4
Orbit True
Vector 248319246.377 -22986751.8747 -321125477.206
Vector -698.50393361 50.1471471741 864.028688706
Double 4.90279493298e+012
Double 40417.5918308
Handle Moon
Handle NULL
Handle NULL
Select Target
0 Escape
Autoplan
0 0
Plan type
0 1
Plan
0 0
Plan
0 1
Plan
0 0
Select Minor
0 None
Manoevre mode
0 0
Base Orbit
0 0
Prograde vel.
1 0
Man. date
1 40418.6823948
Outward vel.
1 0
Ch. plane vel.
1 0
Intercept with
0 0
Graph projection
0 0
Scale to view
0 0
Advanced
0 0
View Orbit
0 0
Finvars
Finish BaseFunction
Int 3
Orbit True
Vector -423937527.288 -5547211.02551 58587182.753
Vector -25.1590372751 305.315646798 35.7343399844
Double 3.98600439969e+014
Double 40421.7219233
Handle Earth
Handle Moon
Handle NULL
Select Target
0 None
Autoplan
0 0
Plan type
0 2
Plan
0 0
Plan
0 0
Plan
0 2
Select Minor
0 None
Manoevre mode
0 0
Base Orbit
0 0
Prograde vel.
1 0
Man. date
1 40418.6821496
Outward vel.
1 0
Ch. plane vel.
1 0
Intercept with
0 0
Graph projection
0 0
Scale to view
0 0
Advanced
0 0
Velocity.
1 0
Outward angle
1 0
Inc. angle
1 0
Inherit Vel.
0 0
Eject date
1 40421.7219233
Finvars
Finish BaseFunction
END_MFD

BEGIN_MFD Right
TYPE User
MODE TransX
END_MFD

BEGIN_PANEL
END_PANEL


BEGIN_SHIPS
AS-506:saturn5nasp
STATUS Orbiting Earth
RPOS 6238363.50 532542.08 2501849.43
RVEL -2494.252 1504.820 10408.053
AROT 8.23 13.22 -1.45
PRPLEVEL 0:0.048
NASSPVER 60040
STAGE 21
VECHNO 506
APOLLONO 11
DOCKSTATE 0
PANEL_ID 1
TOAPO 185.940
TOPER 183.160
TOHDG 73.500
TCP -8.500
MISSNTIME 10239.365
NMISSNTIME 10248.428
LMISSNTIME 9888.272
STAGESTATUS 202
MAINSTATE 8
LIGHTSTATE 512
CSWITCH 0
SSWITCH 0
LPSWITCH 33032
RPSWITCH 262175
CPSWITCH 28927
CP2SWITCH 0
CP3SWITCH 504
CP4SWITCH 255
CP5SWITCH 3
MOONLAT 23.430
MOONLONG 0.690
MOONALT 0.000
LANG English
DSKY_BEGIN
PROG 15
VERB 16
NOUN 95
R1 0
R2 60
R3 10868
EPOS 2
EVAL 16
E2 16
E5
R1FMT XXX XX
R2FMT XXXXXX
R3FMT XXXXXX
STATE 5412
DSKY_END
AGC_BEGIN
YAAGC 0
BRNTIME 10038.554
BRNSTIME 9863.259
BRNETIME 10188.848
EVTTIME 10190.368
CUTFVEL 10868.817
TGTDV 3164.000
STATE 3
EMEM000 18
EMEM005 15
EMEM006 16
EMEM007 95
EMEM008 1
EMEM009 18594
EMEM010 18316
EMEM012 11
EMEM013 7350
EMEM021 9522
EMEM060 129
EMEM061 1105
EMEM062 2
EMEM063 16388
EMEM065 16384
AGC_END
END
END_SHIPS

 

[Bj]

First off, I'm looking at you picture, and is this before or after separation? (time your trying to rotate) If its after, I see your csm is turned to the off position, and second, are you aware how to move the screen over? You press ctrl and (right arrow)

Ill keep looking for anything else.

 

[Bj]

After looking it over, I think what the problem was you missed several steps before launch. Did you have the documentation open and read every step of the way? Its a lot,

see;

1-1
LIFTOFF CONFIGURATION

PANEL 1

EMS FUNC - V *
EMS MODE - STBY
HUD MODE RNDZ - test/off
HUD MODE LVLH - test/off
HUD MODE ORBIT - test/off
ATT SET - GDC
CSM ATT ROLL - OFF
CSM ATT PITCH - OFF
CSM ATT YAW - OFF
LIM CYCLE - OFF
ATT DBD - MIN
RATE - HIGH
CONTR - TRANS
ROT CONTR PWR - AC/DC
SC CONT - SCS
CMC MODE - AUTO
SIVB ATT ROLL – ON (UP)
SIVB ATT PITCH – ON (UP)
SIVB ATT PITCH – ON (UP)
SPS THRUST - NORMAL (lock)
V THRUST (2) - OFF (guarded)
SIVB GIMBAL PITCH - CMD
SIVB GIMBAL YAW - CMD
SPS GMBL MOT PITCH (2) - OFF
SPS GMBL MOT YAW (2) - OFF
V CG - LM/CSM
ELS LOGIC - OFF (guarded)
ELS AUTO - MAN
CM RCS LOGIC - on (up)
CM PRPLNT DUMP - OFF (guarded)
CM PRPLNT PURG - off (down) (guarded)
IMU CAGE - off (down) (guarded)
.05G sw - OFF

L
1-2
/Pc IND sw -
LV/SPS IND SII/SIVB - SII/SIVB
TVC GMBL DR PITCH - AUTO
TVC GMBL DR YAW - AUTO
EVNT TMR RSET - up (center) *
EVNT TMR STRT - center *
EVNT TMR MIN - center *
EVNT TMR SEC - center *

PANEL 2

PL VENT vlv - push (lock) *
PROBE EXTD/REL - OFF (guarded)
PROBE EXTD/RETR (2) tb - gray
DOCK PROBE RETR PRIM - OFF
DOCK PROBE RETTR SEC - OFF
EXT RUN/EVA LT - OFF
EXT RNDZ LT - off (center)
TUNL LT - OFF
LM PWR - OFF
SM RCS He 1 (4) - open
SM RCS He 1 tb(4) - gray
UP TLM CM - BLOCK
UP TLM IU - BLOCK
CM RCS PRESS - off (down) (guarded)
SM RCS IND sw - PRPLNT QTY
SM RCS He 2 (4) - open
SM RCS He 2 (4) tb - gray
SM RCS HTRS (4) - OFF
SM RCS PRPLNT (4) - open
SM RCS PRPLNT tb (8) - gray
RCS CMD - center (OFF*)
RCS TRNFR - center (SM*)
CM RCS PRPLNT (2) - ON
CM RCS PRPLNT tb (2) - gray
SM RCS SEC FUEL PRESS (4) - close
EDS AUTO - on (up)
CSM/LM FINAL SEP (2) - off (down) (guarded)
CM/SM SEP (2) - off (down) (guarded)
SIVB/LM SEP - off (down) (guarded)
PRPLNT DUMP - AUTO
2 ENG OUT - AUTO
LV RATES - AUTO

L
1-3

TWR JETT (2) - AUTO (down) (guarded)
LV GUID - IU
LV STAGE - off (down) (guarded)
XLUNAR - SAFE
MN REL - off (down) guarded)
MSN TMR HR, MIN, SEC - off (center) *
C/W NORM - BOOST
C/W CSM - CSM
C/W PWR - 1
C/W LAMP TEST - off (down)
MSN TMR - START *
RCS IND sel - SM D *
CAB FANS - ON
CRYO PRESS IND - SRG/3 *
CRYO QTY IND – 2 *
H2 HTRS (2) - AUTO
O2 HTRS 1&2 - AUTO
H2 FANS 1&2 - OFF
O2 FANS 1&2 - OFF
ECS IND sel - PRIM *
ECS RAD FLOW AUTO CONT - AUTO
ECS RAD tb - gray *
ECS RAD FLOW PWR CONT - off (center)
ECS RAD MAN SEL - RAD 1
ECS RAD PRIM HTR - off (center)
ECS RAD SEC HTR - OFF
POT H2O HTR - OFF
SUIT CKT H2O ACCUM AUTO - 1
SUIT CKT H2O ACCUM ON - off (center)
SIUT CKT HT EXCH - off (center)
SEC COOL LOOP EVAP - off (center)
SEC COOL LOOP PUMP -off (center)
H2O QTY IND sw -POT
GLY EVAP STM PRESS AUTO - MAN
GLY EVAP STM PRESS INCR - center
HI GAIN ANT TRACK - AUTO
HI GAIN ANT BEAM - WIDE
HI GAIN ANT PITCH POS - 0° *

L
1-4

HI GAIN ANT YAW POS - 180° *
HI GAIN ANT PWR - OFF
HI GAIN ANT SERVO ELECT - PRIM

PANEL 3

VHF ANT - SM LEFT *
SPS ENG INJ VLV ind (4) - CLOSE
FC RAD (3) - up (NORMAL*)
FC RAD (3) tb - gray
FC HTRS (3) - on (up)
FC IND sel - 2 *
SPS QTY TEST - off (center) *
OXID FLOW VLV INCR - NORM *
OXID FLOW VLV PRIM - PRIM *
PUG MODE - NORM *
FC PURG (3) - OFF
FC REAC (3) - up (on*)
FC REAC tb (3) - gray
FC 1 MN BUS A - up (on*)
FC 1 MN BUS A tb - gray
FC 2 MN BUS A - up (on*)
FC 2 MN BUS A tb - gray
FC 3 MN BUS A - OFF
FC 3 MN BUS A tb - bp
MN BUS A RSET - center (RESET*)
FC 1 MN BUS B - OFF
FC 1 MN BUS B tb - bp
FC 2 MN BUS B - OFF
FC 2 MN BUS B tb - bp
FC 3 MN BUS B - up (on*)
FC 3 MN BUS B tp - gray
MN BUS B RSET - center (RESET*)
DC IND sel - MNA *
BAT CHARGE - OFF *
SPS He vlv (2) - AUTO
SPS He vlv tb (2) - bp
SPS LINE HTRS - off (center)
SPS PRES IND sw - He
S BD XPNDR - PRIM
S BD PWR AMPL PRIM - PRIM
S BD PWR AMPL HI - HIGH
PWR AMPL tb - gray

L
1-5

S BD MODE VOICE - VOICE
S BD MODE PCM - PCM
S BD MODE RNG - RNG
S BD AUX TAPE - off (center)
S BD AUX TV - off (center)
UP TLM DATA - DATA
UP TLM CMD - NORM
S BD ANT OMNI - B
S BD ANT - OMNI
VHF AM A - (center)
VHF AM B - DUPLEX
VHF AM RCV - off (center)
VHF AM SQLCH tw (2) - noise threshold + 1 div *
VHF BCN - OFF
VHF RNG - OFF
FC REACS vlv - LATCH
H2 PURG LINE HTR - OFF
TAPE RCDR PCM - PCM/ANLG
TAPE RCDR RCD - RCD
TAPE RCDR FWD - FWD
TAPE MOTION tb - gray
SCE PWR - NORM
PMP PWR - NORM
PCM BIT RATE - HI
AC INV 1 - MNA
AC INV 2 - MNB
AC INV 3 - OFF
INV 1 AC 1 – on (up)
INV 2 AC 1 - OFF
INV 3 AC 1 - OFF
AC 1 RSET - center (RSET*)
INV 1 AC 2 - OFF
INV 2 AC 2 - on (up)
INV 3 AC 2 - OFF
AC BUS 2 RSET - center (RSET*)
AC IND sel - BUS 2 C *

If you have done all of this, then tell me, I can try looking step by step threw it.

 

[TheXxBestxX]

yeah i am aware of it...the panel i take pic is before separation..i just push the CSM separate button just it. i thought when launch it already programmed properly for lift off??

 

[Bj]

Oh, no...

Thats the part of Nasap, you do it yourself...

its like 3 pages of stuff, do you see the documentation ok? I posted it above...

 

[TheXxBestxX]

so the computer is not programmed?? so before lift off, i need to programmed it first??

 

[Bj]

so the computer is not programmed?? so before lift off, i need to programmed it first??

by program I mean that you have do use a series of switches and 'prepare' the ship for launch.

 

[chriswillb]

Look at the check list in the ADDON doc. I Had the same problem before i discovered this.