I have indeed flown this, it's not for the faint of heart!
Yeah, I expect this will be an adventure, but I enjoy digging through the documentation and finding the appropriate procedures etc. And I know some very knowledgeable people I can reach out to if I hit a roadblock.
Speaking of which.... I have a possible self-induced glitch in the scenario that I may have caused when I inadvertently yanked the laptop power cord out of the receptacle. The power disruption occurred while I was in the PTC roll sometime after 31:43. (I was in 6x time accel).
When I re-started the scenario the first time, the simulation crashed. External view showed that the LM was missing, no longer docked to the CSM. I closed the program, then re-started again, and this time the simulation loaded OK, the LM was back. I continued running the scenario, in PTC at 6x, thinking all was well. But around 53:30 i noticed the O2 Tank 2 quantity gauge was reading 20 percent. I worked my way back through quicksaves I made prior to the power interruption, and each time I started the program it would crash, followed by a successful re-start the second time. Finally I found a save point where the O2 Tank 2 quantity was normal (about 84 percent). Then I ran the simulation forward until I found the point where the O2 quantity dropped, which was exactly at 46:45.
Having not run this scenario before I wasn't sure what to expect, but the quantity decrease at 46:45 doesn't seem right to me. So I'm attaching two saves, one at 46:44 just before the drop, and one just after the drop, and hoping you might be able to tell me what I've messed up with the power disruption.
FWIW I ran the sim up to 55:54 and I still get the explosion (didn't need to turn on the fans, no sound but O2 Tank 2 pressure drops to zero rapidly, along with a really nice visual of the panel blowing off and gas venting). O2 Tank 2 quantity stayed at 20 percent. You can see O2 Tank 1 pressure and quantity dropping. The fuel cells continue to run and all the power seems ok, so I guess at some point I'm going to have to self-induce the power issues?
Thanks for the help.