Question Orbiteer STS-Missionpack v 5.1 from Roblin using Hi-Res KSC from Kukanotas

E

Emil

New member
Joined
Apr 1, 2008
Messages
13
Reaction score
0
Points
0
Dear friends,

A couple of days ago I wanted to install the Hi-Res KSC from Kukanotas,wich I think was released in 2007,in order to make it work with
Roblin's Orbiteer STS-Missionpack version 5.1.
I started running the scenarios from 1985-1990,the ones that used LC-39B

These are the coordinates found in the scenarios

PAD-39A:STS_PAYLOADS\PAD39A
STATUS Landed Earth
POS -80.6041400 28.6083000
;POS -80.6211127 28.6271799 ;39B
HEADING 0.00
END

I borrowed them from Gazza's STS-Payloads version 2 and copied them into each Orbiteer scenario

The first set POS -80.6041400 28.6083000 is correct and lets you allign the shuttle pad and base textures in the scenarios in STS-Payloads version 1 and the Orbiteer STS Mission Pack 5.1 with Kukanotas' Hi Res KSC Canaveral.

Unfortunately the second set of coordinates ;POS -80.6211127 28.6271799 ;39B does not work.
The pad is alligned with the base textures around it,but the shuttle, the RSS and LC Tower are not alligend with the pad.

sts26lc39btowerandrssmi.jpg
[/URL]
B]
 
Last edited:
D

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,934
Reaction score
245
Points
138
Location
Cape
You can move them with the scenario editor, then save the scenario.
 
E

Emil

New member
Joined
Apr 1, 2008
Messages
13
Reaction score
0
Points
0
Thank you so much.


-----Post Added-----


Sorry but I couldn't get the thing to run the Scenario Editor gave me an error....
If you would like to,could you please help me with this by editting it for me?
I hgave virtually zero experience with the Scenario Editor...


-----Post Added-----


I am so sorry to tell you that I haven't been able to edit this scenario because I couldn't get the Scenario Editor to work,it couldn't load....
Can you please edit this for me?
I know it's quite embarrasing...
But I would really appreciate it if you helped me with this one...



BEGIN_ENVIRONMENT
System Sol-STS
Date MJD 46458.644456
END_ENVIRONMENT
BEGIN_FOCUS
Ship STS-51L
END_FOCUS
BEGIN_CAMERA
TARGET STS-51L
MODE Extern
POS 2.94 13.56 55.74
TRACKMODE GlobalFrame
FOV 50.0
END_CAMERA
BEGIN_HUD
TYPE Surface
END_HUD
BEGIN_MFD Left
TYPE User
MODE GPC MFD
SITE 1
MODE 1
MET -599
ILOAD 1
END_MFD

BEGIN_MFD Right
TYPE Orbit
PROJ Ship
FRAME Equator
ALT
REF Earth
END_MFD

BEGIN_SHIPS
STS-51L:Shuttle
STATUS Landed Earth
ATTACHED 0:4, PAD-CONTROL
BASE Cape Canaveral:1
HEADING 0.00
PRPLEVEL 0:1.000 1:1.000 2:1.000
NAVFREQ 0 0
CONFIGURATION 0
OV- 99
RMSARM
RENDER
CARGODOOR 0 0.0000
KUBAND 0 0.0000
POSTLAND 0 0.0000
SSMES 0 0.0000
ADTA 0 0.0000
PETD 1 1.0000
SETD 1 1.0000
ARMTILT 0 0.0000 0 0.0000
PRADIATOR 0 0.0000
SRADIATOR 0 0.0000
GEAR 0 0.0000
PAYLOAD_MASS 1000
ARM_SEQ2 0.6815 0.7768 0.8926 0.1935 0.4771 0.5000
ARM_SEQ3 0.5978 0.7735 0.4225 0.3181 0.5818 0.6088
ARM2SET
ARM3SET
PROFILE 1
OMS
CALLOUT
TGT_HEADING 90.00
END
STS-CONTROL:pylon\sts-control
STATUS Orbiting Earth
ATTACHED 0:0,STS-VC
BEGINSEQ "RIGHT AFT WINDOW" USER
SET_CAMERA_OFFSET "STS-VC" 0.420000 0.960000 -12.970200
ENDSEQ
BEGINSEQ "RIGHT LEAN FORWARD" USER
SET_CAMERA_OFFSET "STS-VC" 0.420000 0.960000 -12.790200
ENDSEQ
BEGINSEQ "LEFT AFT WINDOW" USER
SET_CAMERA_OFFSET "STS-VC" -0.420000 0.960000 -12.970200
ENDSEQ
BEGINSEQ "LEFT LEAN FORWARD" USER
SET_CAMERA_OFFSET "STS-VC" -0.420000 0.960000 -12.790200
ENDSEQ
BEGINSEQ "PRE-DEPLOY 29 DEGREES" USER
SET_PARAM "STS-51L-ASE1:Rot_Axis" "X"
SET_PARAM "STS-51L-ASE1:Rot_Angle" -29.00
ENDSEQ
BEGINSEQ "DEPLOY 59 DEGREES" USER
SET_PARAM "STS-51L-ASE1:Rot_Angle" -59.00
SET_PARAM "IUS-UMB:Rot_Angle" -40.00
SET_PARAM "IUS-UMB:Ang_Vel_Max" 2
DELAY 1
SET_PARAM "STS-51L-ASE1:Rot_Axis" ""
ENDSEQ
BEGINSEQ "RELEASE/MONITOR" USER
RELEASE_ATT "STS-51L-ASE1" 0 0.12
DELAY 3510
SET_FOCUS "IUS_1ST_TDRS"
DELAY 90
SET_MAIN_THRUST "IUS_1ST_TDRS" 1.0
DELAY 145.50
SET_MAIN_THRUST "IUS_1ST_TDRS" 0.0
ENDSEQ
BEGINSEQ "POST DEPLOY/STORE" USER PARALLEL
SET_PARAM "STS-51L-ASE1:Rot_Axis" "X"
SET_PARAM "STS-51L-ASE1:Rot_Angle" 6.00
SET_PARAM "IUS-UMB:Rot_Angle" 6.00
SET_PARAM "IUS-UMB:Ang_Vel_Max" 0.334
ENDSEQ
BEGINSEQ "RMS TO SPARTAN-HALLEY/SHIFT+2" USER
SET_FOCUS "STS-51L"
DELAY 5
SET_FOCUS "STS-VC"
ENDSEQ
BEGINSEQ "UNLOCK SPARTAN-HALLEY & GRAPPLE" USER
RELEASE_ATT "SPARTAN-MPESS" 0 0.0
ATTACH "STS-51L" 1 1 "SPARTAN-HALEY"
ENDSEQ
BEGINSEQ "RMS DEPLOYMENT SPARTAN-HALLEY/SHIFT+3" USER
SET_FOCUS "STS-51L"
DELAY 5
SET_FOCUS "STS-VC"
ENDSEQ
BEGINSEQ "SPARTAN-HALLEY INTERNAL" USER
SET_FOCUS "SPARTAN-HALLEY"
DELAY 60
SET_FOCUS "STS-VC"
ENDSEQ
BEGINSEQ "RMS BERTH SPARTAN-HALLEY/SHIFT+4" USER
SET_FOCUS "STS-51L"
DELAY 5
SET_FOCUS "STS-VC"
ENDSEQ
BEGINSEQ "UNGRAPPLE SPARTAN-HALLEY & LOCK" USER
RELEASE_ATT "STS-51L" 1 1 "SPARTAN-HALLEY"
ATTACH "SPARTAN-MPESS" 0 0 "SPARTAN-HALLEY"
ENDSEQ
BEGINSEQ "SHUTTLE CONTROL" USER
SET_FOCUS "STS-51L"
RELEASE_ATT "STS-VC" 2 0
RELEASE_ATT "STS-VC" 5 0
ATTACH "STS-51L" 2 0 "STS-VC"
ENDSEQ
END
STS-51L-BAY:pylon\pylonbay2
STATUS Orbiting Earth
ATTACHED 0:0,STS-51L
BEGINSEQ "STATE"
SET_PARAM "STS-51L-ASE1:Ang_Vel_Max" 0.25
SET_PARAM "IUS-UMB:Rot_Axis" "X"
ENDSEQ
BEGINSEQ "VC CONTROL" USER
SET_FOCUS "STS-VC"
RELEASE_ATT "STS-51L" 2 0
ATTACH "STS-VC" 2 0 "STS-51L"
ENDSEQ
END
STS-51L-ASE1:pylon\pylonASE-IUS1
STATUS Orbiting Earth
ATTACHED 0:0,STS-51L-ASE2
END
IUS-UMB:pylon\pylonIUS-UMB
STATUS Orbiting Earth
ATTACHED 0:1,STS-51L-ASE1
END
STS-51L-ASE2:STS_PAYLOADS\ASE-IUS2
STATUS Orbiting Earth
ATTACHED 0:1,STS-51L-BAY
END
SPARTAN-MPESS:STS_PAYLOADS\spartan1mpess
STATUS Orbiting Earth
ATTACHED 0:6,STS-51L-BAY
END
SPARTAN-Halley:STS_PAYLOADS\SPARTAN1
STATUS Orbiting Earth
ATTACHED 0:0,SPARTAN-MPESS
END
IUS_1ST_TDRS:STS_PAYLOADS\IUS
STATUS Orbiting Earth
ATTACHED 0:0,STS-51L-ASE1
PRPLEVEL 0:1.000
CONFIGURATION 1
CURRENT_PAYLOAD 0
END
STS-VC:STS_PAYLOADS\STS-VC
STATUS Orbiting Earth
ATTACHED 0:2,STS-51L
PRPLEVEL 0:1.000
CONFIGURATION 1
CURRENT_PAYLOAD 0
END
PAD-39A:STS_PAYLOADS\PAD39A
STATUS Landed Earth
;POS -80.6041400 28.6083000
POS -80.620292 28.626810 ;39B
HEADING 0.00
END
PAD-CONTROL:pylon\PAD-CONTROL
STATUS Landed Earth
ATTACHED 0:0,PAD-39A
BEGINSEQ "STATE"
SET_PARAM "RSS:Rot_Axis" "Y"
SET_PARAM "RSS:Ang_Vel_Max" 1
SET_PARAM "RSS:Rot_Angle" -120
SET_PARAM "RSS:Curr_Angle" -120
SET_PARAM "PAD-39A1:Rot_Axis" "Y"
SET_PARAM "PAD-39A1:Ang_Vel_Max" 1
SET_PARAM "PAD-39A2:Rot_Axis" "Z"
SET_PARAM "PAD-39A2:Ang_Vel_Max" 500
SET_PARAM "PAD-39A3:Rot_Axis" "Y"
SET_PARAM "PAD-39A3:Ang_Vel_Max" 1
SET_PARAM "PAD-39A4:Rot_Axis" "Z"
SET_PARAM "PAD-39A4:Ang_Vel_Max" 5
SET_PARAM "WPSP:Lin_Vel_Max" 0.25
SET_PARAM "WPSP:X0" 0
SET_PARAM "WPSP:Y0" 0
SET_PARAM "WPSP:Z0" 0
SET_PARAM "WPSP:X1" 11
SET_PARAM "WPSP:Y1" 0
SET_PARAM "WPSP:Z1" 0
SET_PARAM "WPSP:Clamp" 1
SET_PARAM "WPSP:Curr_Trasl" 11
SET_PARAM "WPSP:Has_Traslation" 1
SET_PARAM "WPSP:Traslation" 11
ENDSEQ
BEGINSEQ "LAUNCH SEQUENCE T-9:00" USER
DELAY 85
SET_FOCUS "PAD-39A1"
DELAY 5
SET_PARAM "PAD-39A1:Rot_Angle" -67
SET_FOCUS "STS-51L"
DELAY 170 ;208
SET_FOCUS "MLPC"
DELAY 31
SET_FOCUS "STS-51L"
DELAY 7
SET_MAIN_THRUST "BEANIECAP_PURGE" 0.0
SET_PARAM "PAD-39A4:Rot_Angle" 38
DELAY 1
SET_PARAM "PAD-39A3:Rot_Angle" -72
DELAY 71
RELEASE_ATT "PAD-CONTROL" 4 0
DELAY 12
SET_MAIN_THRUST "HO2_IGNITERS1" 1
SET_MAIN_THRUST "HO2_IGNITERS2" 1
DELAY 4
SET_MAIN_THRUST "MLPC" 0
DELAY 3
SET_PARAM "PAD-39A2:Ang_Accel" 60
SET_PARAM "PAD-39A2:Rot_Angle" -120
SET_MAIN_THRUST "HO2_IGNITERS1" 0
SET_MAIN_THRUST "HO2_IGNITERS2" 0
ENDSEQ
BEGINSEQ "RSS ROLL FORWARD" USER
SET_PARAM "RSS:Rot_Angle" 0
DELAY 1
SET_PARAM "WPSP:Traslation" 0
ENDSEQ
BEGINSEQ "RSS ROLL BACK" USER
SET_PARAM "WPSP:Traslation" 11
DELAY 1
SET_PARAM "RSS:Rot_Angle" -120
ENDSEQ
BEGINSEQ "STOP ET VENTING" USER
SET_MAIN_THRUST "BEANIECAP_PURGE" 0.0
SET_PARAM "PAD-39A4:Rot_Angle" 38
ENDSEQ
BEGINSEQ "BEGIN ET VENTING" USER
SET_PARAM "PAD-39A4:Rot_Angle" 0
SET_MAIN_THRUST "BEANIECAP_PURGE" 1.0
ENDSEQ
BEGINSEQ "RETRACT BEANIE ARM" USER
SET_PARAM "PAD-39A3:Rot_Angle" -72
ENDSEQ
BEGINSEQ "EXTEND BEANIE ARM" USER
SET_PARAM "PAD-39A3:Rot_Angle" 0
ENDSEQ
BEGINSEQ "RETRACT CREW ACCESS ARM" USER
SET_PARAM "PAD-39A1:Rot_Angle" -67
ENDSEQ
BEGINSEQ "EXTEND CREW ACCESS ARM" USER
SET_PARAM "PAD-39A1:Rot_Angle" 0
ENDSEQ
BEGINSEQ "PAD LIGHTS OFF" USER
SET_MAIN_THRUST "light_39A" 0.0
ENDSEQ
BEGINSEQ "PAD LIGHTS ON" USER
SET_MAIN_THRUST "light_39A" 1.0
ENDSEQ
END
RSS:pylon\RSS
STATUS Landed Earth
ATTACHED 0:0,PAD-CONTROL
END
WPSP:pylon\WPSP
STATUS Landed Earth
ATTACHED 0:0,RSS
END
PAD-39A1:pylon\CREWARM
STATUS Landed Earth
ATTACHED 0:1,PAD-CONTROL
END
PAD-39A2:pylon\INTERRIM
STATUS Landed Earth
ATTACHED 0:2,PAD-CONTROL
END
PAD-39A3:pylon\BEANIEARM
STATUS Landed Earth
ATTACHED 0:3,PAD-CONTROL
END
PAD-39A4:pylon\BEANIECAP
STATUS Landed Earth
ATTACHED 0:0,PAD-39A3
END
BEANIECAP_PURGE:STS_PAYLOADS\BEANIECAP_PURGE
STATUS Landed Earth
ATTACHED 0:0,PAD-39A4
PRPLEVEL 0:1.000
THLEVEL 0:1.000
NAVFREQ 0 0
CONFIGURATION 0
CURRENT_PAYLOAD 0
END
HO2_IGNITERS1:STS_PAYLOADS\HO2_IGNITERS
STATUS Landed Earth
ATTACHED 0:6,PAD-CONTROL
PRPLEVEL 0:1.000
CONFIGURATION 0
CURRENT_PAYLOAD 0
END
HO2_IGNITERS2:STS_PAYLOADS\HO2_IGNITERS
STATUS Landed Earth
ATTACHED 0:7,PAD-CONTROL
PRPLEVEL 0:1.000
CONFIGURATION 0
CURRENT_PAYLOAD 0
END
light_39A:STS_PAYLOADS\LIGHT
STATUS Landed Earth
;POS -80.6043650 28.6082400 ;39A
POS -80.6211127 28.6271799 ;39B
HEADING 2.00
PRPLEVEL 0:1.000
CONFIGURATION 0
CURRENT_PAYLOAD 0
END
MLPC:STS_PAYLOADS\MLPCamera
STATUS Landed Earth
ATTACHED 0:5,PAD-CONTROL
CONFIGURATION 0
CURRENT_PAYLOAD 0
END
END_SHIPS
 
You must log in or register to reply here.

Similar threads

Johan2011
OHM Kev Shanow's K-LC-39-v9 Updated for Orbiter 2010-P1
Replies
2
Views
740
Johan2011
Johan2011
T
Search Orbiter 2010 hi-res KSC
2 3
Replies
49
Views
16K
blixel
blixel
OrbitHangar
OHM KSC-Missile-Row v2 HI-RES and Default-res FIX
Replies
19
Views
8K
tblaxland
tblaxland
A
Problem Hi-Res KSC flashing textures
Replies
2
Views
3K
ASCII
A
astrosammy
Tutorial KSC LC-39: Slat's LC39-EAFB 2006 in Orbiter 2010
Replies
1
Views
7K
DelRioPilot
D
Top