This is the screen I have now.
Payload bay.
Which buttons on the C2 keyboard exactly ? What order and such ?
Never mind. I figured it out. I was'nt using the + button to separate the commands. :facepalm:
SSU is all about the Space Shuttle, not the ISS. So if the ISS is in the wrong attitude, then it is up to you to fix this.I have a question regarding ISS oritentation regarding its LVLH datum.
Do we have to orientate ISS manually to do the correct TORVA procedure or is ISS already in the right orientation for a R bar approach then RPM and V bar approach on the right docking pod?
The RCS only works from the left side. They will not operate from any camera views or the RMS side. And I have done 'cntrl + A' for RCS control.
Yes I was confused when the line changed to ITEM (15)
I think that RCS control should be restored from the PLB camera views, at least until the CCTV system is fully implemented.To use the RCS you need to be "near" a RHC and/or THC. When in the CDR and aft pilot stations the user can control the RCS, as those stations have a RHC and a THC. In the pilot seat there's only a RHC, so only rotations work there.
I can't check now, but I think I made the aft station RHC and THC accessible from the RMS station and from the centerline camera position (for docking, just until we get TVs).
If you automatically, then no, neither could the real shuttle.Yes indeed. I doubt we will see CCTV in my life time.
---------- Post added at 03:11 PM ---------- Previous post was at 02:57 PM ----------
Can SSU shuttle nullify motion with a target ?
I don't want to get anyones hopes up, or put any pressure on the D3D9 folks, but last year while I was browsing the D3D9 files to make the ADI ball, I noticed some functions that might be what is needed to have the TVs running. I never got around to play with that... :facepalm:Yes indeed. I doubt we will see CCTV in my life time.
Hello Guys,
I have another question.
I am working on TAL procedure, I manage to land on Moron and Istres. Data base from SPEC 50 work great.
However, for Zaragoza (item 41+4), I think there is a glitch in the data base. The distance under the ADI for Zaragoza is like 1000Nm too far.
For example, I have Moron selected in Spec 50, distance is 700Nm, I switch to ZZA, distance is almost 2000Nm.