Project Multistage2015 - Development Thread

dundun92

Member
Joined
Feb 18, 2012
Messages
42
Reaction score
28
Points
18
Question: Is multiple meshes per stage (similar to VesselBuilder) something that is intended to be implemented for Multistage2015?
 

jacquesmomo

Addon Developer
Addon Developer
Joined
Jun 14, 2008
Messages
611
Reaction score
449
Points
78
Location
FRANCE
Website
francophone.dansteph.com
Hello :cheers:

as far as I remember, no, only one mesh for one stage....(or one stage = 1 mesh).


extract from the doc:
Meshname=abc (Name of the mesh) (Mandatory)


on the other hand you can put several "stages" at the same coordinates ..... ?
 

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
So can I add an AAPO lunar lander? The Saturn 5 is along the Z axis. While the LM is along the Y axis? Short of rotating the LM
[PAYLOAD_1] MeshName=AAPO\LM_DescentStage Off=(0,0,73.7) Mass=5712 Height=29.87 Diameter=6.61 Module=AAPO\Parts\DescentStage Name=LMTRUCK Render=1 Live=1
 

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
I got an issue. I am sure the answer is easy. I have a new Vulcan. Where there is a main stage and 2 boosters. I have all 4 fueled up. But only the main stage is firing or at least visually firing? 4 tanks 2 booster and 1st and 2nd stage.
[BOOSTER_1] N=1 MeshName="newvulcanbooster" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4800000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=3 ENG_3=(1.35,5.467,-16.55) ENG_4=(-1.35,5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,-4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [BOOSTER_2] N=1 MeshName="newvulcanbooster2" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4800000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=3 ENG_5=(1.35,-5.467,-16.55) ENG_6=(-1.35,-5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [STAGE_1] Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4800000 BurnTime=240 off=(0,0,0) speed=(0,0,-5) ENG_1=(1.35,0,-16.55) ENG_2=(-1.35,0,-16.55) ENG_DIAMETER=1 MeshName="VulcanBooster" Eng_pstream1=Fume PITCHTHRUST=362000 YAWTHRUST=362000 ROLLTHRUST=36200 ROT_SPEED=0 [SEPARATION_12] MeshName=VulcanInterstage Diameter=5.400 Height=2.900 EmptyMass=2000.000 off=(0.000,0.000,0.000) SPEED=(0.000,0.000,-1.000) ROT_SPEED=(0.000,0.000,0.000) Separation_delay=0.000 Module=Stage

SCN:
Vulcan:Multistage2015 STATUS Landed Earth POS -80.5828310 28.5834560 HEADING 190.00 ALT -0.139 AROT 151.089 -8.261 174.537 ATTACHED 0:0,MS_LaunchPad_Vulcan AFCMODE 7 PRPLEVEL 0:1.000000 1:1.000000 2:1.000000 3:0.999501 NAVFREQ 0 0 0 0 XPDR 0 CONFIG_FILE Config\Multistage2015\Vulcan_ALPACAnew.ini GUIDANCE_FILE Config\Multistage2015\Guidance\VulcanTEST.txt CONFIGURATION 0 CURRENT_BOOSTER 1 CURRENT_STAGE 1 CURRENT_INTERSTAGE 1 CURRENT_PAYLOAD 1 FAIRING 1 MET -13.000 STAGE_IGNITION_TIME 0.000000 STAGE_STATE 1 ALT_STEPS 100.0,350.0,1400.0,35000.0 PEG_PITCH_LIMIT 35.000 PEG_MC_INTERVAL 0.100 RAMP END

from the flight state:
Vulcan:Multistage2015 STATUS Landed Earth POS -80.5828310 28.5834560 HEADING 190.00 ALT -0.139 AROT 151.089 -8.261 174.537 ATTACHED 0:0,MS_LaunchPad_Vulcan AFCMODE 7 PRPLEVEL 0:1.000000 1:1.000000 2:1.000000 3:0.999501 NAVFREQ 0 0 0 0 XPDR 0 CONFIG_FILE Config\Multistage2015\Vulcan_ALPACAnew.ini GUIDANCE_FILE Config\Multistage2015\Guidance\VulcanTEST.txt CONFIGURATION 0 CURRENT_BOOSTER 1 CURRENT_STAGE 1 CURRENT_INTERSTAGE 1 CURRENT_PAYLOAD 1 FAIRING 1 MET -13.000 STAGE_IGNITION_TIME 0.000000 STAGE_STATE 1 ALT_STEPS 100.0,350.0,1400.0,35000.0 PEG_PITCH_LIMIT 35.000 PEG_MC_INTERVAL 0.100 RAMP END
 

Attachments

  • vulcanthrust.jpg
    vulcanthrust.jpg
    95.3 KB · Views: 10
Last edited:

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
Scn after all 4 tanks filled. 4 tanks. 2 boosters 1st stage and 2ndstage.

From the scn only 1 thruster is using fuel.
I redid the ini and she works:)
[BOOSTER_1] N=1 MeshName="newvulcanbooster" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4800000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=3 ENG_1=(1.35,5.467,-16.55) ENG_2=(-1.35,5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,-4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [BOOSTER_2] N=1 MeshName="newvulcanbooster2" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4800000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=3 ENG_1=(1.35,-5.467,-16.55) ENG_2=(-1.35,-5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,4.000,0.000) Rot_speed=(-0.200,-0.400,0.000)
 

Attachments

  • VulcanAlpacalaunch.jpg
    VulcanAlpacalaunch.jpg
    146.7 KB · Views: 4

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
A weird issue. I basically took the thrust from the main stage vulcan 4.9 KN. And have 2 others. So basically 3 main stages. But when I press P to launch the rocket in the HUD you see it add thrust and then goes to zero and add thrust again?

[MISC] cog=7 FOCUS=1 [TEXTURE_LIST] TEX_1=Exhaust2 TEX_2=SLS_2016\SSME_Exhaust TEX_3=SLS_2016\SLS_SRB_contrail TEX_4=Contrail1 [PARTICLESTREAM_1] NAME=SRB_contrail SRCSIZE=1 SRCRATE=12 V0=30 SRCSPREAD=0.05 LIFETIME=0.5 GROWTHRATE=3 ATMSLOWDOWN=0.3 LTYPE=EMISSIVE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-6 AMAX=1 TEX=contrail2 GROWFACTOR_RATE=6 GROWFACTOR_SIZE=0.2 [PARTICLESTREAM_2] NAME=SRB_exhaust SRCSIZE=1 SRCRATE=12 V0=50 SRCSPREAD=0.05 LIFETIME=15.5 GROWTHRATE=3 ATMSLOWDOWN=0.3 LTYPE=DIFFUSE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-6 AMAX=1 Tex=SLS_2016\SLS_SRB_contrail GROWFACTOR_RATE=6 GROWFACTOR_SIZE=0.2 [PARTICLESTREAM_3] NAME=Mach TEX=Contrail SRCSIZE=2.4 SRCRATE=120 V0=12 SRCSPREAD=0 LIFETIME=0.25 GROWTHRATE=6 ATMSLOWDOWN=0 LTYPE=EMISSIVE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=4 ATMSMAP=ATM_PLOG AMIN=0.7e-7 AMAX=1 [PARTICLESTREAM_4] NAME=Fume TEX=Contrail1 SRCSIZE=3 SRCRATE=150 V0=140.0 SRCSPREAD=0.3 LIFETIME=1 GROWTHRATE=15 ATMSLOWDOWN=1.0 LTYPE=DIFFUSE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-4 AMAX=2 [FX_MACH] pstream=Mach mach_min=1.0 mach_max=1.1 off_1=(0,0,48) dir=(0,0,-1) [BOOSTER_1] N=1 MeshName="newvulcanbooster" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=3 ENG_1=(1.35,5.467,-16.55) ENG_2=(-1.35,5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,-4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [BOOSTER_2] N=1 MeshName="newvulcanbooster2" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=3 ENG_1=(1.35,-5.467,-16.55) ENG_2=(-1.35,-5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [STAGE_1] Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 BurnTime=240 off=(0,0,0) speed=(0,0,-5) ENG_1=(1.35,0,-16.55) ENG_2=(-1.35,0,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail MeshName="VulcanBooster" Eng_pstream1=Fume PITCHTHRUST=362000 YAWTHRUST=362000 ROLLTHRUST=36200 ROT_SPEED=0 [SEPARATION_12] MeshName=VulcanInterstage Diameter=5.400 Height=2.900 EmptyMass=2000.000 off=(0.000,0.000,0.000) SPEED=(0.000,0.000,-1.000) ROT_SPEED=(0.000,0.000,0.000) Separation_delay=0.000 Module=Stage [STAGE_2] Height=11.700 Diameter=5.400 EmptyMass=1914.000 FuelMass=54432.000 Thrust=212000.000 BurnTime=800.000 off=(0.000,0.000,0.000) MeshName=VulcanCentaur ENG_1=(0.000,1.100,18.750) ENG_2=(0.000,-1.100,18.750) ENG_DIAMETER=1.000 Eng_tex=SLS_2016\SSME_Exhaust IGNITE_DELAY=10.000 PITCHTHRUST=17291.700 YAWTHRUST=17291.700 ROLLTHRUST=17291.700 Reignitable=1 Eng_pstream1= Eng_pstream2= Eng_dir=(0.000,0.000,1.000) Module=Stage Speed=(0.000,0.000,0.000) Rot_speed=(0.000,0.000,0.000) [FAIRING] N=2 MeshName="Vulcanalpacafairing1" Diameter=5.4 Height=23.4 off=(0,0,0) Speed=(0,7.5,0) EMPTYMASS=4650 [PAYLOAD_1] off=(0.000,0.000,37) Meshname="NEWALPACA//NEWALPACAMAIN" Module=ALPACANEW4 Name=ALPACA5 Diameter=3.07 Mass=12000 Rotation=(0.000,90.000,0.000) Speed=(0,0,1) RENDER=1 Live=1
scn
Vulcan:Multistage2015 STATUS Landed Earth POS -80.5828310 28.5834560 HEADING 190 FUEL 1.000 CONFIG_FILE Config\Multistage2015\Vulcan_ALPACA5new.ini GUIDANCE_FILE Config\Multistage2015\Guidance\VulcanTEST.txt MET -3.000 GNC_RUN 0 CONFIGURATION 0 CURRENT_BOOSTER 1 CURRENT_STAGE 1 CURRENT_PAYLOAD 1 FAIRING 1 END

guidance:
0=engine(0,100,7) 13=roll(4,88,91,83,1) 30=pitch(83,30,60) 90=pitch(30,20,30) 120=pitch(20,20,20) 140=pitch(20,25,20) 160=pitch(25,25,40) 170=fairing() 200=pitch(25,25,80) 280=pitch(25,20,80) 360=pitch(20,20,120) 480=pitch(20,10,60) 540=pitch(10,10,30) 570=pitch(10,0,20) 580=pitch(0,0,50) 581=engine(100,0,10) 591=jettison() 800=Target(800000) 1240=engine(0,0,10)
 

fred18

Addon Developer
Addon Developer
Donator
Joined
Feb 2, 2012
Messages
1,666
Reaction score
100
Points
78
A weird issue. I basically took the thrust from the main stage vulcan 4.9 KN. And have 2 others. So basically 3 main stages. But when I press P to launch the rocket in the HUD you see it add thrust and then goes to zero and add thrust again?

[MISC] cog=7 FOCUS=1 [TEXTURE_LIST] TEX_1=Exhaust2 TEX_2=SLS_2016\SSME_Exhaust TEX_3=SLS_2016\SLS_SRB_contrail TEX_4=Contrail1 [PARTICLESTREAM_1] NAME=SRB_contrail SRCSIZE=1 SRCRATE=12 V0=30 SRCSPREAD=0.05 LIFETIME=0.5 GROWTHRATE=3 ATMSLOWDOWN=0.3 LTYPE=EMISSIVE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-6 AMAX=1 TEX=contrail2 GROWFACTOR_RATE=6 GROWFACTOR_SIZE=0.2 [PARTICLESTREAM_2] NAME=SRB_exhaust SRCSIZE=1 SRCRATE=12 V0=50 SRCSPREAD=0.05 LIFETIME=15.5 GROWTHRATE=3 ATMSLOWDOWN=0.3 LTYPE=DIFFUSE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-6 AMAX=1 Tex=SLS_2016\SLS_SRB_contrail GROWFACTOR_RATE=6 GROWFACTOR_SIZE=0.2 [PARTICLESTREAM_3] NAME=Mach TEX=Contrail SRCSIZE=2.4 SRCRATE=120 V0=12 SRCSPREAD=0 LIFETIME=0.25 GROWTHRATE=6 ATMSLOWDOWN=0 LTYPE=EMISSIVE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=4 ATMSMAP=ATM_PLOG AMIN=0.7e-7 AMAX=1 [PARTICLESTREAM_4] NAME=Fume TEX=Contrail1 SRCSIZE=3 SRCRATE=150 V0=140.0 SRCSPREAD=0.3 LIFETIME=1 GROWTHRATE=15 ATMSLOWDOWN=1.0 LTYPE=DIFFUSE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-4 AMAX=2 [FX_MACH] pstream=Mach mach_min=1.0 mach_max=1.1 off_1=(0,0,48) dir=(0,0,-1) [BOOSTER_1] N=1 MeshName="newvulcanbooster" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=3 ENG_1=(1.35,5.467,-16.55) ENG_2=(-1.35,5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,-4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [BOOSTER_2] N=1 MeshName="newvulcanbooster2" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=3 ENG_1=(1.35,-5.467,-16.55) ENG_2=(-1.35,-5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [STAGE_1] Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 BurnTime=240 off=(0,0,0) speed=(0,0,-5) ENG_1=(1.35,0,-16.55) ENG_2=(-1.35,0,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail MeshName="VulcanBooster" Eng_pstream1=Fume PITCHTHRUST=362000 YAWTHRUST=362000 ROLLTHRUST=36200 ROT_SPEED=0 [SEPARATION_12] MeshName=VulcanInterstage Diameter=5.400 Height=2.900 EmptyMass=2000.000 off=(0.000,0.000,0.000) SPEED=(0.000,0.000,-1.000) ROT_SPEED=(0.000,0.000,0.000) Separation_delay=0.000 Module=Stage [STAGE_2] Height=11.700 Diameter=5.400 EmptyMass=1914.000 FuelMass=54432.000 Thrust=212000.000 BurnTime=800.000 off=(0.000,0.000,0.000) MeshName=VulcanCentaur ENG_1=(0.000,1.100,18.750) ENG_2=(0.000,-1.100,18.750) ENG_DIAMETER=1.000 Eng_tex=SLS_2016\SSME_Exhaust IGNITE_DELAY=10.000 PITCHTHRUST=17291.700 YAWTHRUST=17291.700 ROLLTHRUST=17291.700 Reignitable=1 Eng_pstream1= Eng_pstream2= Eng_dir=(0.000,0.000,1.000) Module=Stage Speed=(0.000,0.000,0.000) Rot_speed=(0.000,0.000,0.000) [FAIRING] N=2 MeshName="Vulcanalpacafairing1" Diameter=5.4 Height=23.4 off=(0,0,0) Speed=(0,7.5,0) EMPTYMASS=4650 [PAYLOAD_1] off=(0.000,0.000,37) Meshname="NEWALPACA//NEWALPACAMAIN" Module=ALPACANEW4 Name=ALPACA5 Diameter=3.07 Mass=12000 Rotation=(0.000,90.000,0.000) Speed=(0,0,1) RENDER=1 Live=1
scn
Vulcan:Multistage2015 STATUS Landed Earth POS -80.5828310 28.5834560 HEADING 190 FUEL 1.000 CONFIG_FILE Config\Multistage2015\Vulcan_ALPACA5new.ini GUIDANCE_FILE Config\Multistage2015\Guidance\VulcanTEST.txt MET -3.000 GNC_RUN 0 CONFIGURATION 0 CURRENT_BOOSTER 1 CURRENT_STAGE 1 CURRENT_PAYLOAD 1 FAIRING 1 END

guidance:
0=engine(0,100,7) 13=roll(4,88,91,83,1) 30=pitch(83,30,60) 90=pitch(30,20,30) 120=pitch(20,20,20) 140=pitch(20,25,20) 160=pitch(25,25,40) 170=fairing() 200=pitch(25,25,80) 280=pitch(25,20,80) 360=pitch(20,20,120) 480=pitch(20,10,60) 540=pitch(10,10,30) 570=pitch(10,0,20) 580=pitch(0,0,50) 581=engine(100,0,10) 591=jettison() 800=Target(800000) 1240=engine(0,0,10)
Maybe is the burn delay set for the getaway boosters (it was meant for upper boosters). Try to set it to 0 and see if the issue disappears
 

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
Thanks no. When I press P for launch the thrust applies to 4.9K and then goes back to zero and goes to 4.9
[BOOSTER_1] N=1 MeshName="newvulcanbooster" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=0 ENG_1=(1.35,5.467,-16.55) ENG_2=(-1.35,5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,-4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [BOOSTER_2] N=1 MeshName="newvulcanbooster2" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=0 ENG_1=(1.35,-5.467,-16.55) ENG_2=(-1.35,-5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,4.000,0.000) Rot_speed=(-0.200,-0.400,0.000)

It is like it applys the thrust and re applys the thrust? here is the scn in flight
BEGIN_SHIPS Vulcan:Multistage2015 STATUS Orbiting Earth RPOS 3458407.965 1037694.644 5250303.555 RVEL -291.4602 -91.4914 317.4210 AROT 7.355 -24.151 69.656 VROT -0.8655 0.0127 0.0562 AFCMODE 7 PRPLEVEL 0:0.677471 1:0.677482 2:1.000000 3:0.860701 THLEVEL 0:0.999677 1:0.999677 14:1.000000 15:1.000000 NAVFREQ 0 0 0 0 XPDR 0 CONFIG_FILE Config\Multistage2015\Vulcan_ALPACA5new.ini GUIDANCE_FILE Config\Multistage2015\Guidance\VulcanTEST.txt CONFIGURATION 1 CURRENT_BOOSTER 1 CURRENT_STAGE 1 CURRENT_INTERSTAGE 1 CURRENT_PAYLOAD 1 FAIRING 1 MET 33.746 GNC_RUN 1 STAGE_IGNITION_TIME 0.000000 STAGE_STATE 1 ALT_STEPS 100.0,350.0,1400.0,35000.0 PEG_PITCH_LIMIT 35.000 PEG_MC_INTERVAL 0.100 END

On the THLEVEL not sure why 0 and 1 are the same then what is 14/15
on the PRPLEVEL

[MISC] cog=7 FOCUS=1 [TEXTURE_LIST] TEX_1=Exhaust2 TEX_2=SLS_2016\SSME_Exhaust TEX_3=SLS_2016\SLS_SRB_contrail TEX_4=Contrail1 [PARTICLESTREAM_1] NAME=SRB_contrail SRCSIZE=1 SRCRATE=12 V0=30 SRCSPREAD=0.05 LIFETIME=0.5 GROWTHRATE=3 ATMSLOWDOWN=0.3 LTYPE=EMISSIVE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-6 AMAX=1 TEX=contrail2 GROWFACTOR_RATE=6 GROWFACTOR_SIZE=0.2 [PARTICLESTREAM_2] NAME=SRB_exhaust SRCSIZE=1 SRCRATE=12 V0=50 SRCSPREAD=0.05 LIFETIME=15.5 GROWTHRATE=3 ATMSLOWDOWN=0.3 LTYPE=DIFFUSE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-6 AMAX=1 Tex=SLS_2016\SLS_SRB_contrail GROWFACTOR_RATE=6 GROWFACTOR_SIZE=0.2 [PARTICLESTREAM_3] NAME=Mach TEX=Contrail SRCSIZE=2.4 SRCRATE=120 V0=12 SRCSPREAD=0 LIFETIME=0.25 GROWTHRATE=6 ATMSLOWDOWN=0 LTYPE=EMISSIVE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=4 ATMSMAP=ATM_PLOG AMIN=0.7e-7 AMAX=1 [PARTICLESTREAM_4] NAME=Fume TEX=Contrail1 SRCSIZE=3 SRCRATE=150 V0=140.0 SRCSPREAD=0.3 LIFETIME=1 GROWTHRATE=15 ATMSLOWDOWN=1.0 LTYPE=DIFFUSE LEVELMAP=LVL_PSQRT LMIN=0 LMAX=1 ATMSMAP=ATM_PLOG AMIN=1e-4 AMAX=2 [FX_MACH] pstream=Mach mach_min=1.0 mach_max=1.1 off_1=(0,0,48) dir=(0,0,-1) [BOOSTER_1] N=1 MeshName="newvulcanbooster" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=0 ENG_1=(1.35,5.467,-16.55) ENG_2=(-1.35,5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,-4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [BOOSTER_2] N=1 MeshName="newvulcanbooster2" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=0 ENG_1=(1.35,-5.467,-16.55) ENG_2=(-1.35,-5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [STAGE_1] Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 BurnTime=240 off=(0,0,0) speed=(0,0,-5) ENG_1=(1.35,0,-16.55) ENG_2=(-1.35,0,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail MeshName="VulcanBooster" Eng_pstream1=Fume PITCHTHRUST=362000 YAWTHRUST=362000 ROLLTHRUST=36200 ROT_SPEED=0 [SEPARATION_12] MeshName=VulcanInterstage Diameter=5.400 Height=2.900 EmptyMass=2000.000 off=(0.000,0.000,0.000) SPEED=(0.000,0.000,-1.000) ROT_SPEED=(0.000,0.000,0.000) Separation_delay=0.000 Module=Stage [STAGE_2] Height=11.700 Diameter=5.400 EmptyMass=1914.000 FuelMass=54432.000 Thrust=212000.000 BurnTime=800.000 off=(0.000,0.000,0.000) MeshName=VulcanCentaur ENG_1=(0.000,1.100,18.750) ENG_2=(0.000,-1.100,18.750) ENG_DIAMETER=1.000 Eng_tex=SLS_2016\SSME_Exhaust IGNITE_DELAY=10.000 PITCHTHRUST=17291.700 YAWTHRUST=17291.700 ROLLTHRUST=17291.700 Reignitable=1 Eng_pstream1= Eng_pstream2= Eng_dir=(0.000,0.000,1.000) Module=Stage Speed=(0.000,0.000,0.000) Rot_speed=(0.000,0.000,0.000) [FAIRING] N=2 MeshName="Vulcanalpacafairing1" Diameter=5.4 Height=23.4 off=(0,0,0) Speed=(0,7.5,0) EMPTYMASS=4650 [PAYLOAD_1] off=(0.000,0.000,37) Meshname="NEWALPACA//NEWALPACAMAIN" Module=ALPACANEW4 Name=ALPACA5 Diameter=3.07 Mass=12000 Rotation=(0.000,90.000,0.000) Speed=(0,0,1) RENDER=1 Live=1
 

Attachments

  • vulcanlaunch1.jpg
    vulcanlaunch1.jpg
    88.6 KB · Views: 2
Last edited:

fred18

Addon Developer
Addon Developer
Donator
Joined
Feb 2, 2012
Messages
1,666
Reaction score
100
Points
78
Thanks no. When I press P for launch the thrust applies to 4.9K and then goes back to zero and goes to 4.9
[BOOSTER_1] N=1 MeshName="newvulcanbooster" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=0 ENG_1=(1.35,5.467,-16.55) ENG_2=(-1.35,5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,-4.000,0.000) Rot_speed=(-0.200,-0.400,0.000) [BOOSTER_2] N=1 MeshName="newvulcanbooster2" Height=33.3 Diameter=5.4 EmptyMass=30000 FuelMass=368000 Thrust=4900000 angle=180. off=(0,0,0) BurnTime=84 Burndelay=0 ENG_1=(1.35,-5.467,-16.55) ENG_2=(-1.35,-5.467,-16.55) eng_diameter=0.75 Eng_tex=Exhaust2 ENG_PSTREAM1=srb_exhaust ENG_PSTREAM2=srb_contrail Speed=(15.000,4.000,0.000) Rot_speed=(-0.200,-0.400,0.000)

It is like it applys the thrust and re applys the thrust?
Can you do a video or a series of screenshots?
 

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
Here you go. So once I press P the countdown begins and it appls thrust and then applys thrust and the rocket lifts off
 

Attachments

  • bandicam 2023-05-13 19-07-12-508.zip
    3.2 MB · Views: 4

jacquesmomo

Addon Developer
Addon Developer
Joined
Jun 14, 2008
Messages
611
Reaction score
449
Points
78
Location
FRANCE
Website
francophone.dansteph.com
That means if your cut off time order occur to late, the rocket engine will stop at the altitude "abside"...

So you can write
10 abside=130
For exemple
But read the doc For the types as I'm not at home
 

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
Thanks. I am still unsure
this is for the SLS
-10.000 =orbit(150,250,51.6,1.00,72,0.00)

we know the p=150
a=250
inclination 51.6
1 upright
72? is Gravity turn pitch?
0 is the Abside.
 

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
How to get this LMHabitat to be along the z axis? It is similar to a LM

Do I need to just rotate the mesh?
[STAGE_4] Height=9 Diameter=4.33 EmptyMass=2775 FuelMass=21105 Thrust=146800 BurnTime=625 Ignite_Delay=3 off=(0,0,72.5) MeshName=Velcro/CentaurG ENG_TEX=ProjectApollo\Exhaust_j2 ENG_1=(0.72,0,-9) ENG_2=(-0.72,0,-9) ENG_DIAMETER=1.01 speed=(0,0,0) rot_speed=(0,0,0) PITCHTHRUST=1500 YAWTHRUST=1500 ROLLTHRUST=700 [FAIRING] N=2 MeshName=Velcro\Parts\21ft_Fairing Off=(0,0,53.85) Speed=(10,0,0) Angle=0 Diameter=6.6142 Height=17.07 Emptymass=3500 [PAYLOAD_1] Meshname=LMHABIAT2016 Off=(-0.25,0,75.25) Mass=5712 Height=29.87 Diameter=6.61 Module=LMTRUCKHAB Name=LM Render=1 Live=1
 

Attachments

  • ms2015lmhab.jpg
    ms2015lmhab.jpg
    13.6 KB · Views: 12

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
Thanks. That worked.
[PAYLOAD_1] Meshname=LMHABIAT2016 Off=(-0.25,0,73.25) Angle=180 Mass=5712 Height=29.87 Diameter=6.61 Module=LMTRUCKHAB Name=LM Render=1 Live=1 Rotation=90
 

Attachments

  • lmhabitatsaturn.jpg
    lmhabitatsaturn.jpg
    12.7 KB · Views: 8
Top