OHM Soyuz FG/U v1.2

[OrbitHangar]

Author: thorton

It includes following versions of Soyuz rocket:
- Soyuz FG
- Soyuz U (with and without Fregat)
- Soyuz 2.1a (with Fregat)

Features:
- Fully compatible with Soyuz TM/TMA from ISS v3.2 addon
- Accurate implementation of Emergency Escape System
- Realistic launch and flight sequinces based on modern Soyuz launcher
- Two different launch complex - LC1 & LC31, for manned and unmanned launches
- Trajectory plotting in Google Earth
- Launch and flight failures

Read user manual carefully before use.

Enjoy!

New in v.1.2:
- targeting panel is available again;
- updated LC meshes



DOWNLOAD

 

[Istochnikov]

Three letters: W O W This Soyuz is AWESOME!!! :thumbup:

A little question: Do you (both Thorton or Igel) plan the Soyuz 2.1B or Soyuz 2-3 upgrades?

 

[Thorton]

yes, to 2.1b, but later and Soyuz 2-3 when it starts flying

 

[Donamy]

Superb !! What an addon should be.

 

[Thorton]

Thanks Don!

 

[Donamy]

No, thank you. First time it exploded, it scared the heck out of me. You really raised the bar on this one.

 

[jgrillo2002]

4 words. Holy Mother of God!
Nice job Thorton. Really really nice, this is going to revolutionize soyuz missions for orbiter

 

[trafalgar11111]

Building my own Baikonur Kit.

Is it possible to write a scenario where both soyuz pads @ Baikonur are present or does this cause a name conflict error.

 

[Puma]

are there any plans for a virtual cockpit for the soyuz?

 

[isda]

:thumbup: yup...hv been long time waiting for Thorton create vc for his TMA...I think its the time 4 TMA having its own vc and cant wait 4 it

 

[Thorton]

Is it possible to write a scenario where both soyuz pads @ Baikonur are present or does this cause a name conflict error.

Yes its possible.

are there any plans for a virtual cockpit for the soyuz?

yes, but dont expect it soon

 

[trafalgar11111]

Thanks, I shall struggle on then. :thumbup:

 

[geoair]

a VC for soyuz yes!!!!!!!!!!!!:thumbup:

 

[trafalgar11111]

Success I've got both Soyuz pads working & I've found where Zenit pad is on Google Earth.

 

[Yoda]

Could you post a "how to" since I'd love to have two Soyuz-pads myself ?

Thanks.

 

[trafalgar11111]

Quick fix for two Soyuz Pads

Launchpad:r7_launchpad
STATUS Landed Earth
POS 63.3423560 45.9222500
HEADING 0.00
NAVFREQ 94 481
STATE 0
READY01 0
READY02 0
READY03 0
READY04 0
FIRSTSTEP 0
START 0
A 0.00
BETA 0.00
PSI 0.00
OMEGAPSI 0.00
ALAUNCH 0.59
H0 0.00
FAR 0
TIME 220.88
STIME 0.00
FTIME 0.00
CONFIG 1
SETAZIMUT 0
LAUNCHERTYPE 3
LAUNCHER R7
PARLEVEL 0.00
BEGIN 0
LOCKSAD 0
END
Launchpad31:r7_SZ\Launchpad31
STATUS Landed Earth
PRPLEVEL 0:1.000000
=========== VESSEL2M vars 
=========== LAUNCHPAD vars 
FUELING_MAST 1.00
BOOMS_MESHNAME r7_SZ\BoomF
CABLEMAST_MESHNAME r7_SZ\CableMast
FUELMAST_MESHNAME r7_SZ\FuelMastF
TABLETOP_MESHNAME r7_SZ\TableTop31
LAUNCHER Launcher
ORBIT 200.00 500.00 -85.00
END

A quick solution using the old and new R7 versions. Simply rename the Pad 31/6 to avoid Name clash.It worked for me. Ask the man & he might write us a nice tidy version. :thumbup:

 

[Urwumpe]

trafalgar11111: can you put your scenario into "code" tags? would make it easier to read.

---------- Post added at 09:41 PM ---------- Previous post was at 08:26 PM ----------

Am I the only one who has the parachute of the SA open already before the SA separates from the fairing?

also the Tab key does not switch to the Soyuz spacecraft, while proudly switching between wreckage. I would prefer it to not switch to the wreckage, but instead support the payload as target, if possible.

 

[Thorton]

Am I the only one who has the parachute of the SA open already before the SA separates from the fairing?

Are you sure you've installed ISS v3.1 patch? It looks like you use old SA module.

 

[Urwumpe]

Are you sure you've installed ISS v3.1 patch? It looks like you use old SA module.

Uuh, no, must have missed this one.

 

[trafalgar11111]

Dual Pad, Dual Launch.

I've succeded in my Dual Pad, Dual Launch Mission. :thumbup::thumbup:
1/ Backup .cfg folders r7_S & r7_SZ
2/ Make a copy of the contents of them & paste. Giving thus file & file copy inside those folders.
3/ Create a scenario using e.g. a/ TMA on LC1/5 b/ Fregat on LC31/6.
4/ Rename the componants of one set XXX_Copy:XXX - Copy
and change the PAYLOAD and Launcher BLOCK Names accordingly.

BEGIN_DESC
Dual Pad, Dual Launch. 4th stage version of Soyuz rocket with single payload Launched from LC 31/6. TMA from LC1/5
END_DESC
BEGIN_ENVIRONMENT
  System SolM
  Date MJD 54383.550451
END_ENVIRONMENT
BEGIN_FOCUS
  Ship BlockI
END_FOCUS
BEGIN_CAMERA
  TARGET BlockI
  MODE Extern
  POS 2.90 -163.29 -27.57
  TRACKMODE GlobalFrame
  FOV 50.00
END_CAMERA
BEGIN_HUD
  TYPE Surface
END_HUD
BEGIN_MFD Left
  TYPE Map
  REF Earth
  OTARGET ISS
  TRACK ON
END_MFD
BEGIN_MFD Right
 TYPE Orbit
  PROJ Ship
  FRAME Equator
  ALT
  TARGET ISS 
  REF Earth
END_MFD
 
BEGIN_SHIPS
Demo_sat:r7_SZ\TMA_fairing - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.0000
  FTYPE 1
  MESHNAME1 r7_SZ\demo_sat
  MASS 2600
END
Fregat_Copy:r7_SZ\Fregat - Copy
  STATUS Orbiting Earth
  RPOS -2417416.18 6159525.11 -1269811.96
  RVEL 7044.768 2351.146 -2027.386
  AROT 91.37 2.52 95.44
  PRPLEVEL 0:1.000 1:1.000
  FUEL 5350.0000 85.0000
  ADAPTER_MESHNAME r7_SZ\Fregat_adapter
  PAYLOAD1 Demo_sat
  PREF1 0.000 0.000 -1.300
END
Fairing1_Copy:r7_SZ\TMA_fairing - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.0000
  FTYPE 1
  MESHNAME1 r7_SZ\S_fairing
  MASS 450
END
Fairing2_Copy:r7_SZ\TMA_fairing - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.0000
  FTYPE 1
  MESHNAME1 r7_SZ\S_fairing
  MASS 450
END
BlockI_Copy:r7_SZ\BlockI - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  FAIRING1 Fairing2_Copy
  FREF1 -1.738 0 -2.62
  FROT1 0 -1 0
  FAIRING2 Fairing1_Copy 
  FREF2 -1.738 0 -2.62
  FROT2 0 1 0
  PAYLOAD Fregat_Copy
  PREF 0 0 -0.39
  PAY_ADAPTER 2
END
BlockB_Copy:r7_S\BlockBD - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  BODY_MESHNAME r7_SZ\BlockBD
END
BlockV_Copy:r7_S\BlockBD - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  BODY_MESHNAME r7_SZ\BlockBD
END
BlockG_Copy:r7_S\BlockBD - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  BODY_MESHNAME r7_SZ\BlockBD
END
BlockD_Copy:r7_S\BlockBD - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  BODY_MESHNAME r7_SZ\BlockBD
;  RELIABILITY 5.
END
Launcher_Copy:r7_SZ\BlockA - Copy
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  =========== BLOCK A vars 
  PAYLOAD BlockI_Copy
  PREF 0.0 0.0 -4.25
  ADAPTER_MESHNAME r7_SZ\BlockIAdapter
  BODY_MESHNAME r7_SZ\BlockA
  BLOCK_B BlockB_Copy 
  BLOCK_V BlockV_Copy 
  BLOCK_G BlockG_Copy 
  BLOCK_D BlockD_Copy 
END
Launchpad_31:r7_SZ\Launchpad31
 STATUS Landed Earth
 LAUNCHER Launcher_Copy
 MANUAL_CONTROL ;LAUNCH_MJD 54383.556238
 ORBIT 196.00 242.00 51.60
 BOOMS_MESHNAME r7_SZ\BoomF
 FUELING_MAST 1.00
 CABLEMAST_MESHNAME r7_SZ\CableMast
 FUELMAST_MESHNAME r7_SZ\FuelMastF
 TABLETOP_MESHNAME r7_SZ\TableTop31
END
kmlWriter:r7_SZ\kmlWriter - Copy
  STATUS Landed Earth
END
SoyuzTMA-11:ISSR\SouyzTMA
  STATUS Landed Earth
  POS -128.5364451 26.0026864
  HEADING 96.22
  ATTACHED 0:5,Stage3
  PRPLEVEL 0:1.000
  CAM 0 0.0000 1
  SOL_DEP 0 0.0000 1
  ENG_COV 0 0.0000 1 0 0
  VKA 0 0.0000 1
  PROBE 0 0.0000 1 0.0000
  LIGHT 1 0
  BATTERY 39938.4015 95.0914
  SHOWDATA 1
  DEPLOY 60.0000
  TRACK 0
  INIT 1
  TARGET 
  CURDOCK 0
  CMST 0
  DETACH 0
  DEPRESS 0 0.0000
  IMP 3
  ALLOW_BALLISTIC
  BALLISTIC
END
SAS:r7_SZ\LES
  STATUS Landed Earth
  PRPLEVEL 0:1.000 1:1.000
  LESTYPE 3
END
Fairing1:r7_SZ\TMA_fairing
  STATUS Landed Earth
  PRPLEVEL 0:1.0000
  FTYPE 0
  MESHNAME1 r7_SZ\SF12
  MESHNAME2 r7_SZ\SF02
END
Fairing2:r7_SZ\TMA_fairing
  STATUS Landed Earth
  PRPLEVEL 0:1.0000
  FTYPE 0
  MESHNAME1 r7_SZ\SF11
  MESHNAME2 r7_SZ\SF01
END
BlockI:r7_SZ\BlockI
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  FAIRING1 Fairing2
  FREF1 -1.245 0 -3
  FROT1 0 -1 0
  FAIRING2 Fairing1 
  FREF2 -1.245 -0.005 -3
  FROT2 0 1 0
  LES SAS
  PAYLOAD SoyuzTMA-11
  PREF 0 0 -3
  PAY_ADAPTER 0
  RELIABILITY 100.
END
BlockB:r7_S\BlockBD
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  BODY_MESHNAME r7_SZ\BlockBD
  RELIABILITY 100.
END
BlockV:r7_S\BlockBD
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  BODY_MESHNAME r7_SZ\BlockBD 
  RELIABILITY 100.  
END
BlockG:r7_S\BlockBD
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  BODY_MESHNAME r7_SZ\BlockBD
  RELIABILITY 100.
END
BlockD:r7_S\BlockBD
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  BODY_MESHNAME r7_SZ\BlockBD
  RELIABILITY 100.
END
Launcher:r7_SZ\BlockA
  STATUS Landed Earth
  PRPLEVEL 0:1.000
  =========== BLOCK A vars 
  PAYLOAD BlockI
  PREF 0.0 0.0 -4.25
  ADAPTER_MESHNAME r7_SZ\BlockIAdapter
  BODY_MESHNAME r7_SZ\BlockA
  BLOCK_B BlockB 
  BLOCK_V BlockV 
  BLOCK_G BlockG 
  BLOCK_D BlockD 
  RELIABILITY 100.
END
Launchpad:r7_S\Launchpad
 STATUS Landed Earth
 LAUNCHER Launcher
 MANUAL_CONTROL   ;LAUNCH_MJD 54383.556238
 ORBIT 196.00 242.00 51.60
 BOOMS_MESHNAME r7_SZ\BoomS
 FUELING_MAST 1.00
 CABLEMAST_MESHNAME r7_SZ\CableMast
 TABLETOP_MESHNAME r7_SZ\TableTop1Late
END
kmlWriter:r7_SZ\kmlWriter
  STATUS Landed Earth
END
END_SHIPS

I,ve left the Launchpads on MANUAL. Set firing by:
F3, Launchpad / F1,Bunker / F8,Set Timer.
I fired mine five minutes apart and it worked.
:hail::thumbup: