• ORBITER-FORUM will be temporarily closed at 2026-07-23 18:00 UTC while we complete some OF maintenance tasks. The amount of downtime is expected to take up to one hour, but probably less.

Project Space Transportation System 2016

The payloads for STS-38 were two satellites, an SDS2 (USA-67) and an HS-376 (Prowler)....

Fortunately both satellites have Orbiter add-ons already, with SDS2 being included in the STS-28 package

The configuration for STS-38 should be identical with the image below:
View attachment 40746
Thanks. I will see about updating that to STS 38
 
Not to add too much to your list - but it would be great to look at STS-35.

Thanks for all your effort!
 
Thanks. I guess technically the payload should be
The PKM employed for SDS 2-2 was the Orbus 21S - a spin-stabilized version of the first stagemotor of the Inertial Upper Stage (IUS). For the IUS, the standard separation delta-V was about9.5 m/s, which put the shuttle about 80 km behind, and 30 km above the PKM at firing.Since Prowler was based on the HS-376 bus, it probably employed the PAM-D, as explained inSection 5.2. The standard separation delta-V was about 3.4 m/s, which put the shuttle about 20km behind, and 10 km above the PKM at firing.
Here is STS 35
 

Attachments

  • STS35VIEW2.jpg
    STS35VIEW2.jpg
    80.6 KB · Views: 15
The PKM employed for SDS 2-2 was the Orbus 21S - a spin-stabilized version of the first stagemotor of the Inertial Upper Stage (IUS).
It should be something like was seen on STS-49, but deployed "sideways" like the Leasats.
Intelsat-603-deploy.jpg
 
Yes STS-35 is already an addon, but it doesn't function or show up in the D3D.
 
It might be due to the fact that the payload things Astro,... are sc3/4
copy the config/spacecraft folder and place here:
D:\Orbiter2016\Modules\Server\Config\spacecraft
 
Looking through the scen files it looks like no one has made STS-62, STS-63, STS-69. Would be interesting...
 
Looking through the scen files it looks like no one has made STS-62, STS-63, STS-69. Would be interesting...
I think @gattispilot made STS-63 already, just not posted. STS-69 is WSF-2 & SPARTAN201, both payloads already made, need just put them together (need EVA also for historical re-make). Not sure about STS-62
 
On sts 38. I guess the scn needs the HS376a needs to be renamed Prowler and the APC to SBS2
 

Attachments

  • sts38payload1.jpg
    sts38payload1.jpg
    61.8 KB · Views: 9
  • sts38payload2.jpg
    sts38payload2.jpg
    50.4 KB · Views: 9
The name of the larger satellite is SDS2, not SBS2 (that was a name for a different, civilian commercial satellite)...

These SDS2 satellites were launched three times from a Shuttle (STS-28, STS-38 and STS-53) and once from a Titan IV and Atlas II
 
Thanks. So for STS38 I have them as:
PAMD2-SBS-4:SDS2
STATUS Orbiting Earth
RPOS 6574420.05 333453.41 -1399377.49
RVEL 795.305 -7406.795 1939.046
AROT 98.32 34.52 166.98
ATTACHED 0:0,STS-38
AFCMODE 7
PRPLEVEL 0:0.995608
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
END
SDS-2-PAM: PROWLER

do we have sts 53?
 
Back
Top