Kaito
Orbiquiz Coordinator
- Joined
- Jul 24, 2008
- Messages
- 857
- Reaction score
- 0
- Points
- 0
If this has already been answered, I apologize.
I have been working with TNeo on building a station in orbit. As with any large construction site, the Dragonfly is in order. The Dragonfly worked fine for me in 2006P1, but now in 2010P1, I'm having some issues:
1) The docking panel is black. Not the MFD, but the panel on the Dragonfly that shows the CoG set, Vessel select, etc. All the buttons work, but the panel itself isn't working
2) The Auto CoG isn't working at all. I have the selector set to "Auto", and it has been powered up correctly (I printed off the Manual so I made sure I got everything correct), and nothing. It also appears that using Manual and setting it doesn't change anything either.
If someone can help with these two, that would be great.
Thank you,
~Kaito
I have been working with TNeo on building a station in orbit. As with any large construction site, the Dragonfly is in order. The Dragonfly worked fine for me in 2006P1, but now in 2010P1, I'm having some issues:
1) The docking panel is black. Not the MFD, but the panel on the Dragonfly that shows the CoG set, Vessel select, etc. All the buttons work, but the panel itself isn't working
2) The Auto CoG isn't working at all. I have the selector set to "Auto", and it has been powered up correctly (I printed off the Manual so I made sure I got everything correct), and nothing. It also appears that using Manual and setting it doesn't change anything either.
If someone can help with these two, that would be great.
Thank you,
~Kaito
