asdad
Member
GLS, it works now thanks and date is corrected, but in cosumables I can't edit propellant and when i press backspace is reset to default
Last edited:
SSU Workbench development
- Thread starter GLS
- Start date
GLS
Well-known member
What about the scenario, does MJD have a dot or a comma?
Yeah, editing text boxes with numbers boxes isn't "trivial", because I'm enforcing a valid number at all times, but if you select one digit at a time and type what it should be, it should work.
---------- Post added at 09:53 AM ---------- Previous post was at 09:48 AM ----------
Also, please save a mission and post it here, just to confirm other parts need work related to the dot vs comma issue.
asdad
Member
GLS, this is STS-1.cfg Mission but in create scenario is only export scenario and no import scenario so i can't load scenario
Last edited:
GLS
Well-known member
No no, post the mission file itself after you saved it, not what is in the window.
Yes, the scenario part is one-way only: you can only export a mission to a scenario.
Yes, the scenario part is one-way only: you can only export a mission to a scenario.
asdad
Member
GLS, This is STS-1 cfg after i save mission in SSU Workbench and for Target inc, Target Alt, etc I edit Manualy in MECO (Legacy) tab
Last edited:
kuddel
Donator
- Joined
- Apr 1, 2008
- Messages
- 2,064
- Reaction score
- 507
- Points
- 113
Hi there,
if your code is C++ and you're using STL I/O, these two stackoverflow topics might enlighten you how to force a decimal separator (and grouping- and thousands- separator):
---------- Post added at 23:14 ---------- Previous post was at 23:01 ----------
If you have a .res file (I assume) you can also set the whole application language to english:
In the .res file there should be several occurrences of
You can set these in the resource editor in the IDE as well...might be the more convenient choice.
if your code is C++ and you're using STL I/O, these two stackoverflow topics might enlighten you how to force a decimal separator (and grouping- and thousands- separator):
- https://stackoverflow.com/questions/15220861/how-can-i-set-the-decimal-separator-to-be-a-comma (in your case you would like the opposite -a point instead of a comma- however)
- https://stackoverflow.com/questions...m-istream-that-have-different-digit-separator
---------- Post added at 23:14 ---------- Previous post was at 23:01 ----------
If you have a .res file (I assume) you can also set the whole application language to english:
In the .res file there should be several occurrences of
Code:
//...
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_UK
//...You can set these in the resource editor in the IDE as well...might be the more convenient choice.
GLS
Well-known member
The workbench is in C#. Nobody complained that the mission files had issues when loading them into Orbiter, so the C++ part should be ok.
The solution which appears to work for the date (in C#) is to force dots as decimal separators. Now I also have to do the same for the other floating-point parameters (MECOAlt, etc...).
asdad
Member
GLS , I have problem when i create scenario in SSU Workbench i got something like this:
Last edited:
GLS
Well-known member
GLS , I have problem when i create scenario in SSU Workbench i got something like this:
Yes, there are still problems with the output of floating point numbers for some cultures (dot vs comma), including yours. I'll fix it maybe today or tomorrow.
asdad
Member
ok no problem
GLS
Well-known member
Made the missing changes to hopefully solve any incompatibility issues with different culture settings.
asdad, as you have different settings I'll need your help to confirm this is fixed:
1) load the STS-26R missing file (the original verison)
2) save it
3) attach the file to a post here, or open it with notepad or something and copy/past it to here (use the CODE tags)
4) create a scenario from that mission, and also attach or post it here
asdad, as you have different settings I'll need your help to confirm this is fixed:
1) load the STS-26R missing file (the original verison)
2) save it
3) attach the file to a post here, or open it with notepad or something and copy/past it to here (use the CODE tags)
4) create a scenario from that mission, and also attach or post it here
asdad
Member
Code:
Name=STS-26R
Orbiter=Discovery
OrbiterTexture=Discovery_original
ET=LWT
SRM=RSRM
LaunchSite=KSC
LaunchPad=LC-39B
LaunchPadType=1988
MLP=2
T0=47433.6506944444
TargetInc=28.500000
TargetLAN=0.000000
MECOAlt=109268.000000
MECOVel=7848.801000
MECOFPA=1.202536
PerformRollToHeadsUp=FALSE
OMSAssistEnable=FALSE
OMSAssistDuration=59.000
MaxSSMEThrust=104.0
ThrottleDown=792.000
ThrottleUp=1304.000
FRCSLoad=2473
LRCSLoad=2692
RRCSLoad=2692
LOMSLoad=6950
ROMSLoad=6981
UseRMS=FALSE
UseKUBand=TRUE
UseSTBDMPM=FALSE
UseODS=FALSE
UseExtAL=FALSE
UseTAA=FALSE
AftTAA=FALSE
HasBulkheadFloodlights=TRUE
HasDragChute=FALSE
HasPLBLiner=TRUE
Bridgerails=8,10,11
SILTS=FALSE
LogSSMEData=FALSE
UseCISS=FALSE
CISS_GPrime=FALSE
UseASE_IUS=TRUE
ASE_IUS_AftLocation=FALSE
InternalPRSDTankSets=3
HasEDOKit=FALSE
EDOPallets=0
HasOMSKit=FALSE
UpperStageName=IUS-7
PayloadVesselUpperStage=SSU_DemoSat
PayloadNameUpperStage=TDRS-C
PayloadAttachmentUpperStage=0
AdapterMesh=SSU\IUS\IUS_DemoSat_adapter
AdapterOffset=1.1833
AdapterMass=300
IUSLoadStage1=1
IUSLoadStage2=1
IUSRCSTanks=2
IUS4Antennas=FALSE---------- Post added at 05:42 PM ---------- Previous post was at 05:41 PM ----------
Code:
BEGIN_DESC
END_DESC
BEGIN_ENVIRONMENT
System Sol
Date MJD 47433.6444444445
Context SSU
END_ENVIRONMENT
BEGIN_FOCUS
Ship Discovery
END_FOCUS
BEGIN_CAMERA
TARGET Discovery
MODE Cockpit
FOV 40.00
END_CAMERA
BEGIN_MFD Left
TYPE User
MODE CRT
END_MFD
BEGIN_MFD Right
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 3
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 4
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 5
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 6
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 7
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 9
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 10
TYPE User
MODE CRT
END_MFD
BEGIN_VC
END_VC
BEGIN_SHIPS
LCC:SSU_LCC
STATUS Landed Earth
POS -80.6493245 28.5852249
HEADING 35.60
ALT 2.000
LAUNCH_MJD 47433,6506944444
PAD_NAME LC-39B
END
LC-39B:SSU_LC39_1988
STATUS Landed Earth
POS -80.6208620 28.6272150
HEADING 270.00
ALT 0.050
AROT -180.000 80.621 118.627
OAA 1 1,0000
GVA 1 1,0000
VENT_HOOD 1 1,0000
ETVAS 1 1,0000
IAA 0 0,0000
FSS_OWP 0 0,0000
RSS_OWP 0 0,0000
RSS 0 0,0000
EAST_SRB_SFD 1 1,0000
WEST_SRB_SFD 1 1,0000
LCC_NAME LCC
END
MLP-2:SSU_MLP
STATUS Landed Earth
ATTACHED 0:0,LC-39B
T0_UMB 1 1,0000
END
Discovery:SpaceShuttleUltra
STATUS Landed Earth
ATTACHED 0:0,MLP-2
AFCMODE 7
PRPLEVEL 0:1.000000 1:1.000000 2:0.631808 3:0.998000 4:0.998000 5:0.998000 6:1.000000 7:1.000000 8:1.000000 11:0.020000
MISSION STS-26R
CONFIGURATION 0
VC_POS 0
SBTC 0,00 0,00
OPS 101
PLB_CAM 0,0000 -90,0000 0,0000 90,0000 0,0000 -90,0000 0,0000 90,0000
@SUBSYSTEM HeEng_C
PRESS 4200.000000
VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM ;HeEng_C
@SUBSYSTEM HeEng_L
PRESS 4200.000000
VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM ;HeEng_L
@SUBSYSTEM HeEng_R
PRESS 4200.000000
VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM ;HeEng_R
@SUBSYSTEM HePneu
PRESS 4200.000000
VALVES 1.000000 1.000000 0.000000
@ENDSUBSYSTEM ;HePneu
@SUBSYSTEM MPS_C
SSME config 1
VIE config 1
DCU_chA config 1
DCU_chB config 1
CIE_chA config 1
CIE_chB config 1
@ENDSUBSYSTEM ;MPS_C
@SUBSYSTEM MPS_L
SSME config 1
VIE config 1
DCU_chA config 1
DCU_chB config 1
CIE_chA config 1
CIE_chB config 1
@ENDSUBSYSTEM ;MPS_L
@SUBSYSTEM MPS_R
SSME config 1
VIE config 1
DCU_chA config 1
DCU_chB config 1
CIE_chA config 1
CIE_chB config 1
@ENDSUBSYSTEM ;MPS_R
@SUBSYSTEM EIU1
@ENDSUBSYSTEM ;EIU1
@SUBSYSTEM EIU2
@ENDSUBSYSTEM ;EIU2
@SUBSYSTEM EIU3
@ENDSUBSYSTEM ;EIU3
@SUBSYSTEM MTU
MET_RUNNING 0
MET0 0.000000
MET1 0.000000
MET2 0.000000
@ENDSUBSYSTEM ;MTU
@SUBSYSTEM IDP1
IDP1 SPEC 65535
IDP1 DISP 65535
@ENDSUBSYSTEM ;IDP1
@SUBSYSTEM IDP2
IDP2 SPEC 65535
IDP2 DISP 18
@ENDSUBSYSTEM ;IDP2
@SUBSYSTEM IDP3
IDP3 SPEC 65535
IDP3 DISP 18
@ENDSUBSYSTEM ;IDP3
@SUBSYSTEM IDP4
IDP4 SPEC 65535
IDP4 DISP 65535
@ENDSUBSYSTEM ;IDP4
@SUBSYSTEM SimpleGPCSystem
OVHD 1
IGS 1
IGI 1
RWID 1
LSID 1
@BEGINSOFTWARE SSME_SOP
ShutdownPhase_1 0
ShutdownPhase_2 0
ShutdownPhase_3 0
PostShutdownPhase_1 0
PostShutdownPhase_2 0
PostShutdownPhase_3 0
@ENDSOFTWARE
@BEGINSOFTWARE ATVC_SOP
CONFIG 0
@ENDSOFTWARE
@ENDSUBSYSTEM ;SimpleGPCSystem
@SUBSYSTEM SimpleMDM_FF1
@ENDSUBSYSTEM ;SimpleMDM_FF1
@SUBSYSTEM SimpleMDM_FF2
@ENDSUBSYSTEM ;SimpleMDM_FF2
@SUBSYSTEM ADPS
LEFT_AIRDATAPROBE 1 3 0.000000
RIGHT_AIRDATAPROBE 1 3 0.000000
@ENDSUBSYSTEM ;ADPS
@SUBSYSTEM ETUmbDoors
ET_DOORS 1.000000 1.000000
ET_DOOR_LATCHES 0.000000 1.000000 1.000000
@ENDSUBSYSTEM ;ETUmbDoors
@SUBSYSTEM GCIL
@ENDSUBSYSTEM ;GCIL
@SUBSYSTEM ATVC
@ENDSUBSYSTEM ;ATVC
@SUBSYSTEM MEC1
@ENDSUBSYSTEM ;MEC1
@SUBSYSTEM MEC2
@ENDSUBSYSTEM ;MEC2
@SUBSYSTEM RA1
@ENDSUBSYSTEM ;RA1
@SUBSYSTEM RA2
@ENDSUBSYSTEM ;RA2
@SUBSYSTEM PayloadBay
DOOR_PORT 0 0.0000
DOOR_STBD 0 0.0000
RADIATOR_PORT 0 0.0000
RADIATOR_STBD 0 0.0000
RADLATCH_PORT 0 0.0000
RADLATCH_STBD 0 0.0000
DOORLATCH0 0 0.0000
DOORLATCH1 0 0.0000
DOORLATCH2 0 0.0000
DOORLATCH3 0 0.0000
DOORLATCH4 0 0.0000
DOORLATCH5 0 0.0000
DOORLATCH6 0 0.0000
DOORLATCH7 0 0.0000
KUBAND 0 0.0000
@ENDSUBSYSTEM ;PayloadBay
@SUBSYSTEM LandingGear
ARM 0
DOWN 0
NLG 0.000000
LMG 0.000000
RMG 0.000000
NOWOW_NLG 1
NOWOW_LMG 1
NOWOW_RMG 1
@ENDSUBSYSTEM ;LandingGear
@SUBSYSTEM AeroSurfaces
ELEVON_LOB 0.000000
ELEVON_LIB 0.000000
ELEVON_RIB 0.000000
ELEVON_ROB 0.000000
RUDDER 0.000000
SPEEDBRAKE 0.000000
BODYFLAP 0.000000
@ENDSUBSYSTEM ;AeroSurfaces
@SUBSYSTEM OMS_LEFT
@ENDSUBSYSTEM ;OMS_LEFT
@SUBSYSTEM OMS_RIGHT
@ENDSUBSYSTEM ;OMS_RIGHT
@SUBSYSTEM OMS_TVC_LEFT
PITCH 0.000000
YAW 0.000000
@ENDSUBSYSTEM ;OMS_TVC_LEFT
@SUBSYSTEM OMS_TVC_RIGHT
PITCH 0.000000
YAW 0.000000
@ENDSUBSYSTEM ;OMS_TVC_RIGHT
@SUBSYSTEM DDU1
@ENDSUBSYSTEM ;DDU1
@SUBSYSTEM DDU2
@ENDSUBSYSTEM ;DDU2
@SUBSYSTEM DDU3
@ENDSUBSYSTEM ;DDU3
@SUBSYSTEM HUD1
DECLUTTER 0
GEAR 0 0.000000
CSS 0 0.000000
MLSNV 0 0.000000
B/F 0 0.000000
@ENDSUBSYSTEM ;HUD1
@SUBSYSTEM HUD2
DECLUTTER 0
GEAR 0 0.000000
CSS 0 0.000000
MLSNV 0 0.000000
B/F 0 0.000000
@ENDSUBSYSTEM ;HUD2
@SUBSYSTEM LeftRHC
@ENDSUBSYSTEM ;LeftRHC
@SUBSYSTEM RightRHC
@ENDSUBSYSTEM ;RightRHC
@SUBSYSTEM AftRHC
@ENDSUBSYSTEM ;AftRHC
@SUBSYSTEM LeftTHC
@ENDSUBSYSTEM ;LeftTHC
@SUBSYSTEM AftTHC
@ENDSUBSYSTEM ;AftTHC
@SUBSYSTEM LeftRPTA
@ENDSUBSYSTEM ;LeftRPTA
@SUBSYSTEM RightRPTA
@ENDSUBSYSTEM ;RightRPTA
@SUBSYSTEM LeftSBTC
@ENDSUBSYSTEM ;LeftSBTC
@SUBSYSTEM RightSBTC
@ENDSUBSYSTEM ;RightSBTC
@SUBSYSTEM APU1
APU1_State 0
APU1_FuelPress 0.000000
APU1_HydPress 0.000000
APU1_Speed 0.000000
@ENDSUBSYSTEM ;APU1
@SUBSYSTEM APU2
APU2_State 0
APU2_FuelPress 0.000000
APU2_HydPress 0.000000
APU2_Speed 0.000000
@ENDSUBSYSTEM ;APU2
@SUBSYSTEM APU3
APU3_State 0
APU3_FuelPress 0.000000
APU3_HydPress 0.000000
APU3_Speed 0.000000
@ENDSUBSYSTEM ;APU3
@SUBSYSTEM WSB1
@ENDSUBSYSTEM ;WSB1
@SUBSYSTEM WSB2
@ENDSUBSYSTEM ;WSB2
@SUBSYSTEM WSB3
@ENDSUBSYSTEM ;WSB3
@SUBSYSTEM LATCH0
LATCH_STATE1 1 1.0000
LATCH_STATE2 1 1.0000
LATCH_STATE3 1 1.0000
LATCH_STATE4 1 1.0000
LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM ;LATCH0
@SUBSYSTEM LATCH1
LATCH_STATE1 1 1.0000
LATCH_STATE2 1 1.0000
LATCH_STATE3 1 1.0000
LATCH_STATE4 1 1.0000
LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM ;LATCH1
@SUBSYSTEM LATCH2
LATCH_STATE1 1 1.0000
LATCH_STATE2 1 1.0000
LATCH_STATE3 1 1.0000
LATCH_STATE4 1 1.0000
LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM ;LATCH2
@SUBSYSTEM PRSD
LV011 1.000000
LV021 1.000000
LV031 1.000000
LV041 1.000000
LV013 1.000000
LV023 1.000000
LV024 1.000000
LV033 1.000000
LV043 1.000000
LV044 1.000000
LV012 1.000000
LV022 1.000000
@ENDSUBSYSTEM ;PRSD
@SUBSYSTEM VideoControlUnit
CAMERA_POWER 0 0 0 0 0
OUTPUT 0
INPUTS 0 0 0 0 0 0 0 0
@ENDSUBSYSTEM ;VideoControlUnit
@SUBSYSTEM ACA1
@ENDSUBSYSTEM ;ACA1
@SUBSYSTEM ACA2
@ENDSUBSYSTEM ;ACA2
@SUBSYSTEM ACA3
@ENDSUBSYSTEM ;ACA3
@SUBSYSTEM ACA4
@ENDSUBSYSTEM ;ACA4
@SUBSYSTEM ACA5
@ENDSUBSYSTEM ;ACA5
@SUBSYSTEM DeployedAssembly
ALPHA 124.300000
BETA -27.500000
@ENDSUBSYSTEM ;DeployedAssembly
@SUBSYSTEM ElectronicsAssembly1
@ENDSUBSYSTEM ;ElectronicsAssembly1
@SUBSYSTEM ElectronicsAssembly2
@ENDSUBSYSTEM ;ElectronicsAssembly2
@PANEL F2
"Drag Chute ARM Cover" [0]
"Drag Chute DPY Cover" [0]
@ENDPANEL
@PANEL F3
"Drag Chute ARM Cover" [0]
"Drag Chute DPY Cover" [0]
"Drag Chute JETT Cover" [0]
"HUD Power CDR" OFF
"HUD Power PLT" OFF
"CDR TRIM RHC/PNL" INHIBIT
"CDR TRIM PANEL" ON
"PLT TRIM RHC/PNL" INHIBIT
"PLT TRIM PANEL" ON
@ENDPANEL
@PANEL F4
"Drag Chute JETT Cover" [0]
@ENDPANEL
@PANEL F6
@OBJECT "CDR1"
DISPLAY 3
MENU 2
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "CDR2"
DISPLAY 1
MENU 1
BRIGHTNESS 0.800000
@ENDOBJECT
"Cdr Flt Cntlr Pwr" ON
"ADI Attitude" REF
"ADI Error" MED
"ADI Rate" MED
"Landing Gear ARM Cover" [0]
"Landing Gear DN Cover" [0]
"HUD Mode" NORM
"HUD Brightness" [2]
"HUD Bright" AUTO
"RDR ALTM" 1
@ENDPANEL
@PANEL F7
@OBJECT "CRT1"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "CRT2"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "CRT3"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "MFD1"
DISPLAY 4
MENU 2
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "MFD2"
DISPLAY 3
MENU 2
BRIGHTNESS 0.800000
@ENDOBJECT
"Event Time" 540 0.000000 1 0
@ENDPANEL
@PANEL F8
@OBJECT "PLT1"
DISPLAY 1
MENU 1
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "PLT2"
DISPLAY 4
MENU 2
BRIGHTNESS 0.800000
@ENDOBJECT
"Plt Flt Cntlr Pwr" ON
"ADI Attitude" REF
"ADI Error" MED
"ADI Rate" MED
"Landing Gear ARM Cover" [0]
"Landing Gear DN Cover" [0]
"HUD Mode" NORM
"HUD Brightness" [2]
"HUD Bright" AUTO
"RDR ALTM" 2
@ENDPANEL
@PANEL L1
"Fire Suppression Av Bay 1 Disch Agent Cover" [0]
"Fire Suppression Av Bay 2 Disch Agent Cover" [0]
"Fire Suppression Av Bay 3 Disch Agent Cover" [0]
@ENDPANEL
@PANEL L2
"AntiSkid" ON
"Nose Wheel Steering" 1
"Entry Mode" AUTO
@ENDPANEL
@PANEL C2
"IDP/CRT 1 Power" ON
"IDP/CRT 2 Power" ON
"IDP/CRT 3 Power" ON
"IDP/CRT 1 Maj Func" GNC
"IDP/CRT 2 Maj Func" GNC
"IDP/CRT 3 Maj Func" GNC
"Left CRT Sel" 1
"Right CRT Sel" 2
"Event Timer Mode" Down
@ENDPANEL
@PANEL C3
"LOMS Arm" ARM/PRESS
"ROMS Arm" ARM/PRESS
"BFC CRT Display" ON
"BFC CRT Select" 3+1
"LADP Stow Enable" INHIBIT
"RADP Stow Enable" INHIBIT
"LADP Deploy" STOW
"RADP Deploy" STOW
"MAIN ENGINE LIMIT SHUT DN" AUTO
"SSME Left S/D PB Cover" [0]
"SSME Ctr S/D PB Cover" [0]
"SSME Right S/D PB Cover" [0]
"SRB Separation" AUTO
"SRB Separation PB Cover" [0]
"ET Separation" AUTO
"ET Separation PB Cover" [0]
@ENDPANEL
@PANEL R2
"Boiler1 N2 Supply" ON
"Boiler2 N2 Supply" ON
"Boiler3 N2 Supply" ON
"Boiler1 Power" ON
"Boiler2 Power" ON
"Boiler3 Power" ON
"Boiler1 Cntlr/Htr" A
"Boiler2 Cntlr/Htr" A
"Boiler3 Cntlr/Htr" A
"APU1 Operate" OFF
"APU2 Operate" OFF
"APU3 Operate" OFF
"Hyd Main Pump Press 1" NORM
"Hyd Main Pump Press 2" NORM
"Hyd Main Pump Press 3" NORM
"APU1 Cntlr Pwr" OFF
"APU2 Cntlr Pwr" OFF
"APU3 Cntlr Pwr" OFF
"APU1 Fuel Tank Valve" CLOSE
"APU2 Fuel Tank Valve" CLOSE
"APU3 Fuel Tank Valve" CLOSE
"ET Umb Centerline Latch" GND
"ET Umb Left Door" OFF
"ET Umb Left Door Latch" OFF
"ET Umb Right Door" OFF
"ET Umb Right Door Latch" OFF
"MPS Pwr Left AC2" [1]
"MPS Pwr Ctr AC1" [1]
"MPS Pwr Right AC3" [1]
"MPS Pwr Left AC3" [1]
"MPS Pwr Ctr AC2" [1]
"MPS Pwr Right AC1" [1]
"MPS He Isol A Left" OPEN
"MPS He Isol A Ctr" OPEN
"MPS He Isol A Right" OPEN
"MPS He Isol B Left" OPEN
"MPS He Isol B Ctr" OPEN
"MPS He Isol B Right" OPEN
"MPS PRPLT Dump Sequence" GPC
"MPS PRPLT Backup LH2 vlv" GPC
"Pneu L Eng He XOVR" GPC
"Pneu He Isol" OPEN
"He Interconnect Left" GPC
"He Interconnect Ctr" GPC
"He Interconnect Right" GPC
"LH2 Ullage Press" AUTO
@ENDPANEL
@PANEL R1
"Ess Bus Source MN B/C" ON
"Ess Bus Source MN C/A" ON
"Ess Bus Source MN A/B" ON
"Ess Bus Source FC 1" OFF
"Ess Bus Source FC 2" OFF
"Ess Bus Source FC 3" OFF
"AC Bus Snsr 1" MONITOR
"AC Bus Snsr 2" MONITOR
"AC Bus Snsr 3" MONITOR
"Payload Cabin" OFF
"Payload Aux Cover" [0]
"Payload Aux" OFF
"Payload Aft MN B" OFF
"Payload Aft MN C" OFF
"O2 TK1 Heaters A" AUTO
"O2 TK1 Heaters B" OFF
"O2 TK2 Heaters A" AUTO
"O2 TK2 Heaters B" OFF
"O2 TK3 Heaters A" OFF
"O2 TK3 Heaters B" OFF
"H2 TK1 Heaters A" AUTO
"H2 TK1 Heaters B" OFF
"H2 TK2 Heaters A" AUTO
"H2 TK2 Heaters B" OFF
"H2 TK3 Heaters A" OFF
"H2 TK3 Heaters B" OFF
@ENDPANEL
@PANEL O1
@ENDPANEL
@PANEL O2
"Cryo O2 Htr Assy Temp" TK 1 1
"Cryo Press Qty" TK1
"Fuel Cell Stack Temp" 1
@ENDPANEL
@PANEL O3
"RCS/OMS/PRESS" RCS He X10
"RCS/OMS PRPLT QTY" OMS FUEL
"Mission Timer" MET
@ENDPANEL
@PANEL O6
"L GLRSHLD FLOOD" VAR
"S TRK DR CNTL SYS1 Cover" [0]
"S TRK DR CNTL SYS2 Cover" [0]
"S TRK DR CNTL SYS1" OFF
"S TRK DR CNTL SYS2" OFF
"Annunciator Bus Select ACA 1" MN A
"Annunciator Bus Select ACA 2/3" MN B
"MDM_PL1" ON
"MDM_PL2" ON
"MDM_PL3" ON
"MDM_FA1" ON
"MDM_FA2" ON
"MDM_FA3" ON
"MDM_FA4" ON
"MDM_FF1" ON
"MDM_FF2" ON
"MDM_FF3" ON
"MDM_FF4" ON
"GPC_POWER_1_COVER" [0]
"GPC_POWER_2_COVER" [0]
"GPC_POWER_3_COVER" [0]
"GPC_POWER_4_COVER" [0]
"GPC_POWER_5_COVER" [0]
"GPC POWER 1" ON
"GPC POWER 2" ON
"GPC POWER 3" ON
"GPC POWER 4" ON
"GPC POWER 5" ON
"GPC_OUTPUT_1_COVER" [0]
"GPC_OUTPUT_2_COVER" [0]
"GPC_OUTPUT_3_COVER" [0]
"GPC_OUTPUT_4_COVER" [0]
"GPC_OUTPUT_5_COVER" [0]
"GPC OUTPUT 1" NORMAL
"GPC OUTPUT 2" NORMAL
"GPC OUTPUT 3" NORMAL
"GPC OUTPUT 4" NORMAL
"GPC OUTPUT 5" BACKUP
"IPL SOURCE" OFF
"GPC MODE 1" RUN
"GPC MODE 2" RUN
"GPC MODE 3" RUN
"GPC MODE 4" RUN
"GPC MODE 5" RUN
@ENDPANEL
@PANEL O8
"Radar Altimeter 1" ON
"Radar Altimeter 2" ON
@ENDPANEL
@PANEL O14
"BRAKES MN A" ON
"DDU LEFT MN A" CLOSED
"DDU AFT MN A" CLOSED
"NOSE WHEEL STEERING MN A" CLOSED
"L OMS ENG VLV" ON
@ENDPANEL
@PANEL O15
"BRAKES MN B" ON
"NOSE WHEEL STEERING MN B" CLOSED
"DDU LEFT MN B" CLOSED
"DDU RIGHT MN B" CLOSED
@ENDPANEL
@PANEL O16
"BRAKES MN C" ON
"DDU RIGHT MN C" CLOSED
"DDU AFT MN C" CLOSED
"R OMS ENG VLV" ON
@ENDPANEL
@PANEL O17
"EIU L-C" ON
"EIU C-R" ON
"EIU R-L" ON
"MEC 1 Power" ON
"MEC 2 Power" ON
@ENDPANEL
@PANEL A1U
"SLEW RATE" SLOW
"CONTROL" COMMAND
"STEERING MODE" MAN SLEW
"POWER" OFF
"MODE" RDR PASSIVE
"RADAR OUTPUT" HIGH
@ENDPANEL
@PANEL AftMDU
@OBJECT "AFD1"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
@ENDPANEL
@PANEL A2
"DIGI DIS SELECT" EL/AZ
"X-PNTR SCALE" X10
@ENDPANEL
@PANEL A4
"Mission Timer" MET
"Event Time" 0 0.000000 0 1
@ENDPANEL
@PANEL A6U
"SENSE" -Z
"Aft Flt Cntlr Pwr" OFF
"Payload Retention Logic Power Sys 1" OFF
"Payload Retention Logic Power Sys 2" OFF
"Payload Ret Latch 1" OFF
"Payload Ret Latch 2" OFF
"Payload Ret Latch 3" OFF
"Payload Ret Latch 4" OFF
"Payload Ret Latch 5" OFF
"Payload Select" 1
"ADI Attitude" INRTL
"ADI Error" MED
"ADI Rate" MED
"Annunciator Bus Select" OFF
"Event Timer Mode" UP
@ENDPANEL
@PANEL A7U
"CAMERA_RATE" LOW
"PLBD FLOOD FWD STBD" OFF
"PLBD FLOOD FWD PORT" OFF
"PLBD FLOOD MID STBD" OFF
"PLBD FLOOD MID PORT" OFF
"PLBD FLOOD AFT STBD" OFF
"PLBD FLOOD AFT PORT" OFF
"PLBD FWD BHD" OFF
"PLBD DOCKING" OFF
"RMS SPOTLIGHT PORT" OFF
@ENDPANEL
@PANEL R11
@OBJECT "CRT4"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
"IDP/CRT 4 Power" ON
"IDP/CRT 4 Maj Func" SM
@ENDPANEL
@PANEL R13L
"PL Bay Door SYS 1" DISABLE
"PL Bay Door SYS 2" DISABLE
"PL Bay Mech PWR SYS 1" OFF
"PL Bay Mech PWR SYS 2" OFF
"PL Bay Door" STOP
"Latch Control SYS A" OFF
"Latch Control SYS B" OFF
"Radiator Control SYS A" OFF
"Radiator Control SYS B" OFF
"KU Antenna Direct Stow" OFF
"KU Antenna" GND
@ENDPANEL
END
ET:SSU_LWT
STATUS Landed Earth
ATTACHED 0:20,Discovery
PRPLEVEL 0:0.996000
END
LSRB:SSU_LSRB_RSRM
STATUS Landed Earth
ATTACHED 0:21,Discovery
END
RSRB:SSU_RSRB_RSRM
STATUS Landed Earth
ATTACHED 0:22,Discovery
END
IUS-7:SSU_IUS
STATUS Landed Earth
ATTACHED 0:23,Discovery
PRPLEVEL 0:1.000000 1:1.000000 2:1.000000
EEC 0 0.0000
MISSION STS-26R
END
TDRS-C:SSU_DemoSat
STATUS Landed Earth
ATTACHED 0:0,IUS-7
END
END_SHIPSGLS
Well-known member
The mission file is now good, but I still needed to fix a few items in the scenario. Please try again with the corrections I just committed.
asdad
Member
everything look's good GLS but why in create scenario is no option Launch T-10 Minute ?
GLS
Well-known member
Can you post the scenario for me to confirm?
There is no T-10m because I added a T-9m, which starts at the end of the hold, which is what is currently implemented. :shrug:
asdad
Member
Code:
BEGIN_DESC
END_DESC
BEGIN_ENVIRONMENT
System Sol
Date MJD 47433.6444444445
Context SSU
END_ENVIRONMENT
BEGIN_FOCUS
Ship Discovery
END_FOCUS
BEGIN_CAMERA
TARGET Discovery
MODE Cockpit
FOV 40.00
END_CAMERA
BEGIN_MFD Left
TYPE User
MODE CRT
END_MFD
BEGIN_MFD Right
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 3
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 4
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 5
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 6
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 7
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 9
TYPE User
MODE CRT
END_MFD
BEGIN_MFD 10
TYPE User
MODE CRT
END_MFD
BEGIN_VC
END_VC
BEGIN_SHIPS
LCC:SSU_LCC
STATUS Landed Earth
POS -80.6493245 28.5852249
HEADING 35.60
ALT 2.000
LAUNCH_MJD 47433.6506944444
PAD_NAME LC-39B
END
LC-39B:SSU_LC39_1988
STATUS Landed Earth
POS -80.6208620 28.6272150
HEADING 270.00
ALT 0.050
AROT -180.000 80.621 118.627
OAA 1 1.0000
GVA 1 1.0000
VENT_HOOD 1 1.0000
ETVAS 1 1.0000
IAA 0 0.0000
FSS_OWP 0 0.0000
RSS_OWP 0 0.0000
RSS 0 0.0000
EAST_SRB_SFD 1 1.0000
WEST_SRB_SFD 1 1.0000
LCC_NAME LCC
END
MLP-2:SSU_MLP
STATUS Landed Earth
ATTACHED 0:0,LC-39B
T0_UMB 1 1.0000
END
Discovery:SpaceShuttleUltra
STATUS Landed Earth
ATTACHED 0:0,MLP-2
AFCMODE 7
PRPLEVEL 0:1.000000 1:1.000000 2:0.631808 3:0.998000 4:0.998000 5:0.998000 6:1.000000 7:1.000000 8:1.000000 11:0.020000
MISSION STS-26R
CONFIGURATION 0
VC_POS 0
SBTC 0.00 0.00
OPS 101
PLB_CAM 0.0000 -90.0000 0.0000 90.0000 0.0000 -90.0000 0.0000 90.0000
@SUBSYSTEM HeEng_C
PRESS 4200.000000
VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM ;HeEng_C
@SUBSYSTEM HeEng_L
PRESS 4200.000000
VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM ;HeEng_L
@SUBSYSTEM HeEng_R
PRESS 4200.000000
VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM ;HeEng_R
@SUBSYSTEM HePneu
PRESS 4200.000000
VALVES 1.000000 1.000000 0.000000
@ENDSUBSYSTEM ;HePneu
@SUBSYSTEM MPS_C
SSME config 1
VIE config 1
DCU_chA config 1
DCU_chB config 1
CIE_chA config 1
CIE_chB config 1
@ENDSUBSYSTEM ;MPS_C
@SUBSYSTEM MPS_L
SSME config 1
VIE config 1
DCU_chA config 1
DCU_chB config 1
CIE_chA config 1
CIE_chB config 1
@ENDSUBSYSTEM ;MPS_L
@SUBSYSTEM MPS_R
SSME config 1
VIE config 1
DCU_chA config 1
DCU_chB config 1
CIE_chA config 1
CIE_chB config 1
@ENDSUBSYSTEM ;MPS_R
@SUBSYSTEM EIU1
@ENDSUBSYSTEM ;EIU1
@SUBSYSTEM EIU2
@ENDSUBSYSTEM ;EIU2
@SUBSYSTEM EIU3
@ENDSUBSYSTEM ;EIU3
@SUBSYSTEM MTU
MET_RUNNING 0
MET0 0.000000
MET1 0.000000
MET2 0.000000
@ENDSUBSYSTEM ;MTU
@SUBSYSTEM IDP1
IDP1 SPEC 65535
IDP1 DISP 65535
@ENDSUBSYSTEM ;IDP1
@SUBSYSTEM IDP2
IDP2 SPEC 65535
IDP2 DISP 18
@ENDSUBSYSTEM ;IDP2
@SUBSYSTEM IDP3
IDP3 SPEC 65535
IDP3 DISP 18
@ENDSUBSYSTEM ;IDP3
@SUBSYSTEM IDP4
IDP4 SPEC 65535
IDP4 DISP 65535
@ENDSUBSYSTEM ;IDP4
@SUBSYSTEM SimpleGPCSystem
OVHD 1
IGS 1
IGI 1
RWID 1
LSID 1
@BEGINSOFTWARE SSME_SOP
ShutdownPhase_1 0
ShutdownPhase_2 0
ShutdownPhase_3 0
PostShutdownPhase_1 0
PostShutdownPhase_2 0
PostShutdownPhase_3 0
@ENDSOFTWARE
@BEGINSOFTWARE ATVC_SOP
CONFIG 0
@ENDSOFTWARE
@ENDSUBSYSTEM ;SimpleGPCSystem
@SUBSYSTEM SimpleMDM_FF1
@ENDSUBSYSTEM ;SimpleMDM_FF1
@SUBSYSTEM SimpleMDM_FF2
@ENDSUBSYSTEM ;SimpleMDM_FF2
@SUBSYSTEM ADPS
LEFT_AIRDATAPROBE 1 3 0.000000
RIGHT_AIRDATAPROBE 1 3 0.000000
@ENDSUBSYSTEM ;ADPS
@SUBSYSTEM ETUmbDoors
ET_DOORS 1.000000 1.000000
ET_DOOR_LATCHES 0.000000 1.000000 1.000000
@ENDSUBSYSTEM ;ETUmbDoors
@SUBSYSTEM GCIL
@ENDSUBSYSTEM ;GCIL
@SUBSYSTEM ATVC
@ENDSUBSYSTEM ;ATVC
@SUBSYSTEM MEC1
@ENDSUBSYSTEM ;MEC1
@SUBSYSTEM MEC2
@ENDSUBSYSTEM ;MEC2
@SUBSYSTEM RA1
@ENDSUBSYSTEM ;RA1
@SUBSYSTEM RA2
@ENDSUBSYSTEM ;RA2
@SUBSYSTEM PayloadBay
DOOR_PORT 0 0.0000
DOOR_STBD 0 0.0000
RADIATOR_PORT 0 0.0000
RADIATOR_STBD 0 0.0000
RADLATCH_PORT 0 0.0000
RADLATCH_STBD 0 0.0000
DOORLATCH0 0 0.0000
DOORLATCH1 0 0.0000
DOORLATCH2 0 0.0000
DOORLATCH3 0 0.0000
DOORLATCH4 0 0.0000
DOORLATCH5 0 0.0000
DOORLATCH6 0 0.0000
DOORLATCH7 0 0.0000
KUBAND 0 0.0000
@ENDSUBSYSTEM ;PayloadBay
@SUBSYSTEM LandingGear
ARM 0
DOWN 0
NLG 0.000000
LMG 0.000000
RMG 0.000000
NOWOW_NLG 1
NOWOW_LMG 1
NOWOW_RMG 1
@ENDSUBSYSTEM ;LandingGear
@SUBSYSTEM AeroSurfaces
ELEVON_LOB 0.000000
ELEVON_LIB 0.000000
ELEVON_RIB 0.000000
ELEVON_ROB 0.000000
RUDDER 0.000000
SPEEDBRAKE 0.000000
BODYFLAP 0.000000
@ENDSUBSYSTEM ;AeroSurfaces
@SUBSYSTEM OMS_LEFT
@ENDSUBSYSTEM ;OMS_LEFT
@SUBSYSTEM OMS_RIGHT
@ENDSUBSYSTEM ;OMS_RIGHT
@SUBSYSTEM OMS_TVC_LEFT
PITCH 0.000000
YAW 0.000000
@ENDSUBSYSTEM ;OMS_TVC_LEFT
@SUBSYSTEM OMS_TVC_RIGHT
PITCH 0.000000
YAW 0.000000
@ENDSUBSYSTEM ;OMS_TVC_RIGHT
@SUBSYSTEM DDU1
@ENDSUBSYSTEM ;DDU1
@SUBSYSTEM DDU2
@ENDSUBSYSTEM ;DDU2
@SUBSYSTEM DDU3
@ENDSUBSYSTEM ;DDU3
@SUBSYSTEM HUD1
DECLUTTER 0
GEAR 0 0.000000
CSS 0 0.000000
MLSNV 0 0.000000
B/F 0 0.000000
@ENDSUBSYSTEM ;HUD1
@SUBSYSTEM HUD2
DECLUTTER 0
GEAR 0 0.000000
CSS 0 0.000000
MLSNV 0 0.000000
B/F 0 0.000000
@ENDSUBSYSTEM ;HUD2
@SUBSYSTEM LeftRHC
@ENDSUBSYSTEM ;LeftRHC
@SUBSYSTEM RightRHC
@ENDSUBSYSTEM ;RightRHC
@SUBSYSTEM AftRHC
@ENDSUBSYSTEM ;AftRHC
@SUBSYSTEM LeftTHC
@ENDSUBSYSTEM ;LeftTHC
@SUBSYSTEM AftTHC
@ENDSUBSYSTEM ;AftTHC
@SUBSYSTEM LeftRPTA
@ENDSUBSYSTEM ;LeftRPTA
@SUBSYSTEM RightRPTA
@ENDSUBSYSTEM ;RightRPTA
@SUBSYSTEM LeftSBTC
@ENDSUBSYSTEM ;LeftSBTC
@SUBSYSTEM RightSBTC
@ENDSUBSYSTEM ;RightSBTC
@SUBSYSTEM APU1
APU1_State 0
APU1_FuelPress 0.000000
APU1_HydPress 0.000000
APU1_Speed 0.000000
@ENDSUBSYSTEM ;APU1
@SUBSYSTEM APU2
APU2_State 0
APU2_FuelPress 0.000000
APU2_HydPress 0.000000
APU2_Speed 0.000000
@ENDSUBSYSTEM ;APU2
@SUBSYSTEM APU3
APU3_State 0
APU3_FuelPress 0.000000
APU3_HydPress 0.000000
APU3_Speed 0.000000
@ENDSUBSYSTEM ;APU3
@SUBSYSTEM WSB1
@ENDSUBSYSTEM ;WSB1
@SUBSYSTEM WSB2
@ENDSUBSYSTEM ;WSB2
@SUBSYSTEM WSB3
@ENDSUBSYSTEM ;WSB3
@SUBSYSTEM LATCH0
LATCH_STATE1 1 1.0000
LATCH_STATE2 1 1.0000
LATCH_STATE3 1 1.0000
LATCH_STATE4 1 1.0000
LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM ;LATCH0
@SUBSYSTEM LATCH1
LATCH_STATE1 1 1.0000
LATCH_STATE2 1 1.0000
LATCH_STATE3 1 1.0000
LATCH_STATE4 1 1.0000
LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM ;LATCH1
@SUBSYSTEM LATCH2
LATCH_STATE1 1 1.0000
LATCH_STATE2 1 1.0000
LATCH_STATE3 1 1.0000
LATCH_STATE4 1 1.0000
LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM ;LATCH2
@SUBSYSTEM PRSD
LV011 1.000000
LV021 1.000000
LV031 1.000000
LV041 1.000000
LV013 1.000000
LV023 1.000000
LV024 1.000000
LV033 1.000000
LV043 1.000000
LV044 1.000000
LV012 1.000000
LV022 1.000000
@ENDSUBSYSTEM ;PRSD
@SUBSYSTEM VideoControlUnit
CAMERA_POWER 0 0 0 0 0
OUTPUT 0
INPUTS 0 0 0 0 0 0 0 0
@ENDSUBSYSTEM ;VideoControlUnit
@SUBSYSTEM ACA1
@ENDSUBSYSTEM ;ACA1
@SUBSYSTEM ACA2
@ENDSUBSYSTEM ;ACA2
@SUBSYSTEM ACA3
@ENDSUBSYSTEM ;ACA3
@SUBSYSTEM ACA4
@ENDSUBSYSTEM ;ACA4
@SUBSYSTEM ACA5
@ENDSUBSYSTEM ;ACA5
@SUBSYSTEM DeployedAssembly
ALPHA 124.300000
BETA -27.500000
@ENDSUBSYSTEM ;DeployedAssembly
@SUBSYSTEM ElectronicsAssembly1
@ENDSUBSYSTEM ;ElectronicsAssembly1
@SUBSYSTEM ElectronicsAssembly2
@ENDSUBSYSTEM ;ElectronicsAssembly2
@PANEL F2
"Drag Chute ARM Cover" [0]
"Drag Chute DPY Cover" [0]
@ENDPANEL
@PANEL F3
"Drag Chute ARM Cover" [0]
"Drag Chute DPY Cover" [0]
"Drag Chute JETT Cover" [0]
"HUD Power CDR" OFF
"HUD Power PLT" OFF
"CDR TRIM RHC/PNL" INHIBIT
"CDR TRIM PANEL" ON
"PLT TRIM RHC/PNL" INHIBIT
"PLT TRIM PANEL" ON
@ENDPANEL
@PANEL F4
"Drag Chute JETT Cover" [0]
@ENDPANEL
@PANEL F6
@OBJECT "CDR1"
DISPLAY 3
MENU 2
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "CDR2"
DISPLAY 1
MENU 1
BRIGHTNESS 0.800000
@ENDOBJECT
"Cdr Flt Cntlr Pwr" ON
"ADI Attitude" REF
"ADI Error" MED
"ADI Rate" MED
"Landing Gear ARM Cover" [0]
"Landing Gear DN Cover" [0]
"HUD Mode" NORM
"HUD Brightness" [2]
"HUD Bright" AUTO
"RDR ALTM" 1
@ENDPANEL
@PANEL F7
@OBJECT "CRT1"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "CRT2"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "CRT3"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "MFD1"
DISPLAY 4
MENU 2
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "MFD2"
DISPLAY 3
MENU 2
BRIGHTNESS 0.800000
@ENDOBJECT
"Event Time" 540 0.000000 1 0
@ENDPANEL
@PANEL F8
@OBJECT "PLT1"
DISPLAY 1
MENU 1
BRIGHTNESS 0.800000
@ENDOBJECT
@OBJECT "PLT2"
DISPLAY 4
MENU 2
BRIGHTNESS 0.800000
@ENDOBJECT
"Plt Flt Cntlr Pwr" ON
"ADI Attitude" REF
"ADI Error" MED
"ADI Rate" MED
"Landing Gear ARM Cover" [0]
"Landing Gear DN Cover" [0]
"HUD Mode" NORM
"HUD Brightness" [2]
"HUD Bright" AUTO
"RDR ALTM" 2
@ENDPANEL
@PANEL L1
"Fire Suppression Av Bay 1 Disch Agent Cover" [0]
"Fire Suppression Av Bay 2 Disch Agent Cover" [0]
"Fire Suppression Av Bay 3 Disch Agent Cover" [0]
@ENDPANEL
@PANEL L2
"AntiSkid" ON
"Nose Wheel Steering" 1
"Entry Mode" AUTO
@ENDPANEL
@PANEL C2
"IDP/CRT 1 Power" ON
"IDP/CRT 2 Power" ON
"IDP/CRT 3 Power" ON
"IDP/CRT 1 Maj Func" GNC
"IDP/CRT 2 Maj Func" GNC
"IDP/CRT 3 Maj Func" GNC
"Left CRT Sel" 1
"Right CRT Sel" 2
"Event Timer Mode" Down
@ENDPANEL
@PANEL C3
"LOMS Arm" ARM/PRESS
"ROMS Arm" ARM/PRESS
"BFC CRT Display" ON
"BFC CRT Select" 3+1
"LADP Stow Enable" INHIBIT
"RADP Stow Enable" INHIBIT
"LADP Deploy" STOW
"RADP Deploy" STOW
"MAIN ENGINE LIMIT SHUT DN" AUTO
"SSME Left S/D PB Cover" [0]
"SSME Ctr S/D PB Cover" [0]
"SSME Right S/D PB Cover" [0]
"SRB Separation" AUTO
"SRB Separation PB Cover" [0]
"ET Separation" AUTO
"ET Separation PB Cover" [0]
@ENDPANEL
@PANEL R2
"Boiler1 N2 Supply" ON
"Boiler2 N2 Supply" ON
"Boiler3 N2 Supply" ON
"Boiler1 Power" ON
"Boiler2 Power" ON
"Boiler3 Power" ON
"Boiler1 Cntlr/Htr" A
"Boiler2 Cntlr/Htr" A
"Boiler3 Cntlr/Htr" A
"APU1 Operate" OFF
"APU2 Operate" OFF
"APU3 Operate" OFF
"Hyd Main Pump Press 1" NORM
"Hyd Main Pump Press 2" NORM
"Hyd Main Pump Press 3" NORM
"APU1 Cntlr Pwr" OFF
"APU2 Cntlr Pwr" OFF
"APU3 Cntlr Pwr" OFF
"APU1 Fuel Tank Valve" CLOSE
"APU2 Fuel Tank Valve" CLOSE
"APU3 Fuel Tank Valve" CLOSE
"ET Umb Centerline Latch" GND
"ET Umb Left Door" OFF
"ET Umb Left Door Latch" OFF
"ET Umb Right Door" OFF
"ET Umb Right Door Latch" OFF
"MPS Pwr Left AC2" [1]
"MPS Pwr Ctr AC1" [1]
"MPS Pwr Right AC3" [1]
"MPS Pwr Left AC3" [1]
"MPS Pwr Ctr AC2" [1]
"MPS Pwr Right AC1" [1]
"MPS He Isol A Left" OPEN
"MPS He Isol A Ctr" OPEN
"MPS He Isol A Right" OPEN
"MPS He Isol B Left" OPEN
"MPS He Isol B Ctr" OPEN
"MPS He Isol B Right" OPEN
"MPS PRPLT Dump Sequence" GPC
"MPS PRPLT Backup LH2 vlv" GPC
"Pneu L Eng He XOVR" GPC
"Pneu He Isol" OPEN
"He Interconnect Left" GPC
"He Interconnect Ctr" GPC
"He Interconnect Right" GPC
"LH2 Ullage Press" AUTO
@ENDPANEL
@PANEL R1
"Ess Bus Source MN B/C" ON
"Ess Bus Source MN C/A" ON
"Ess Bus Source MN A/B" ON
"Ess Bus Source FC 1" OFF
"Ess Bus Source FC 2" OFF
"Ess Bus Source FC 3" OFF
"AC Bus Snsr 1" MONITOR
"AC Bus Snsr 2" MONITOR
"AC Bus Snsr 3" MONITOR
"Payload Cabin" OFF
"Payload Aux Cover" [0]
"Payload Aux" OFF
"Payload Aft MN B" OFF
"Payload Aft MN C" OFF
"O2 TK1 Heaters A" AUTO
"O2 TK1 Heaters B" OFF
"O2 TK2 Heaters A" AUTO
"O2 TK2 Heaters B" OFF
"O2 TK3 Heaters A" OFF
"O2 TK3 Heaters B" OFF
"H2 TK1 Heaters A" AUTO
"H2 TK1 Heaters B" OFF
"H2 TK2 Heaters A" AUTO
"H2 TK2 Heaters B" OFF
"H2 TK3 Heaters A" OFF
"H2 TK3 Heaters B" OFF
@ENDPANEL
@PANEL O1
@ENDPANEL
@PANEL O2
"Cryo O2 Htr Assy Temp" TK 1 1
"Cryo Press Qty" TK1
"Fuel Cell Stack Temp" 1
@ENDPANEL
@PANEL O3
"RCS/OMS/PRESS" RCS He X10
"RCS/OMS PRPLT QTY" OMS FUEL
"Mission Timer" MET
@ENDPANEL
@PANEL O6
"L GLRSHLD FLOOD" VAR
"S TRK DR CNTL SYS1 Cover" [0]
"S TRK DR CNTL SYS2 Cover" [0]
"S TRK DR CNTL SYS1" OFF
"S TRK DR CNTL SYS2" OFF
"Annunciator Bus Select ACA 1" MN A
"Annunciator Bus Select ACA 2/3" MN B
"MDM_PL1" ON
"MDM_PL2" ON
"MDM_PL3" ON
"MDM_FA1" ON
"MDM_FA2" ON
"MDM_FA3" ON
"MDM_FA4" ON
"MDM_FF1" ON
"MDM_FF2" ON
"MDM_FF3" ON
"MDM_FF4" ON
"GPC_POWER_1_COVER" [0]
"GPC_POWER_2_COVER" [0]
"GPC_POWER_3_COVER" [0]
"GPC_POWER_4_COVER" [0]
"GPC_POWER_5_COVER" [0]
"GPC POWER 1" ON
"GPC POWER 2" ON
"GPC POWER 3" ON
"GPC POWER 4" ON
"GPC POWER 5" ON
"GPC_OUTPUT_1_COVER" [0]
"GPC_OUTPUT_2_COVER" [0]
"GPC_OUTPUT_3_COVER" [0]
"GPC_OUTPUT_4_COVER" [0]
"GPC_OUTPUT_5_COVER" [0]
"GPC OUTPUT 1" NORMAL
"GPC OUTPUT 2" NORMAL
"GPC OUTPUT 3" NORMAL
"GPC OUTPUT 4" NORMAL
"GPC OUTPUT 5" BACKUP
"IPL SOURCE" OFF
"GPC MODE 1" RUN
"GPC MODE 2" RUN
"GPC MODE 3" RUN
"GPC MODE 4" RUN
"GPC MODE 5" RUN
@ENDPANEL
@PANEL O8
"Radar Altimeter 1" ON
"Radar Altimeter 2" ON
@ENDPANEL
@PANEL O14
"BRAKES MN A" ON
"DDU LEFT MN A" CLOSED
"DDU AFT MN A" CLOSED
"NOSE WHEEL STEERING MN A" CLOSED
"L OMS ENG VLV" ON
@ENDPANEL
@PANEL O15
"BRAKES MN B" ON
"NOSE WHEEL STEERING MN B" CLOSED
"DDU LEFT MN B" CLOSED
"DDU RIGHT MN B" CLOSED
@ENDPANEL
@PANEL O16
"BRAKES MN C" ON
"DDU RIGHT MN C" CLOSED
"DDU AFT MN C" CLOSED
"R OMS ENG VLV" ON
@ENDPANEL
@PANEL O17
"EIU L-C" ON
"EIU C-R" ON
"EIU R-L" ON
"MEC 1 Power" ON
"MEC 2 Power" ON
@ENDPANEL
@PANEL A1U
"SLEW RATE" SLOW
"CONTROL" COMMAND
"STEERING MODE" MAN SLEW
"POWER" OFF
"MODE" RDR PASSIVE
"RADAR OUTPUT" HIGH
@ENDPANEL
@PANEL AftMDU
@OBJECT "AFD1"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
@ENDPANEL
@PANEL A2
"DIGI DIS SELECT" EL/AZ
"X-PNTR SCALE" X10
@ENDPANEL
@PANEL A4
"Mission Timer" MET
"Event Time" 0 0.000000 0 1
@ENDPANEL
@PANEL A6U
"SENSE" -Z
"Aft Flt Cntlr Pwr" OFF
"Payload Retention Logic Power Sys 1" OFF
"Payload Retention Logic Power Sys 2" OFF
"Payload Ret Latch 1" OFF
"Payload Ret Latch 2" OFF
"Payload Ret Latch 3" OFF
"Payload Ret Latch 4" OFF
"Payload Ret Latch 5" OFF
"Payload Select" 1
"ADI Attitude" INRTL
"ADI Error" MED
"ADI Rate" MED
"Annunciator Bus Select" OFF
"Event Timer Mode" UP
@ENDPANEL
@PANEL A7U
"CAMERA_RATE" LOW
"PLBD FLOOD FWD STBD" OFF
"PLBD FLOOD FWD PORT" OFF
"PLBD FLOOD MID STBD" OFF
"PLBD FLOOD MID PORT" OFF
"PLBD FLOOD AFT STBD" OFF
"PLBD FLOOD AFT PORT" OFF
"PLBD FWD BHD" OFF
"PLBD DOCKING" OFF
"RMS SPOTLIGHT PORT" OFF
@ENDPANEL
@PANEL R11
@OBJECT "CRT4"
DISPLAY 0
MENU 3
BRIGHTNESS 0.800000
@ENDOBJECT
"IDP/CRT 4 Power" ON
"IDP/CRT 4 Maj Func" SM
@ENDPANEL
@PANEL R13L
"PL Bay Door SYS 1" DISABLE
"PL Bay Door SYS 2" DISABLE
"PL Bay Mech PWR SYS 1" OFF
"PL Bay Mech PWR SYS 2" OFF
"PL Bay Door" STOP
"Latch Control SYS A" OFF
"Latch Control SYS B" OFF
"Radiator Control SYS A" OFF
"Radiator Control SYS B" OFF
"KU Antenna Direct Stow" OFF
"KU Antenna" GND
@ENDPANEL
END
ET:SSU_LWT
STATUS Landed Earth
ATTACHED 0:20,Discovery
PRPLEVEL 0:0.996000
END
LSRB:SSU_LSRB_RSRM
STATUS Landed Earth
ATTACHED 0:21,Discovery
END
RSRB:SSU_RSRB_RSRM
STATUS Landed Earth
ATTACHED 0:22,Discovery
END
IUS-7:SSU_IUS
STATUS Landed Earth
ATTACHED 0:23,Discovery
PRPLEVEL 0:1.000000 1:1.000000 2:1.000000
EEC 0 0.0000
MISSION STS-26R
END
TDRS-C:SSU_DemoSat
STATUS Landed Earth
ATTACHED 0:0,IUS-7
END
END_SHIPSGLS
Well-known member
Ok, it seems fixed! 
Thanks for the help!
Thanks for the help!
asdad
Member
You're welcome GLS
---------- Post added at 02:56 AM ---------- Previous post was at 02:19 AM ----------
GLS, I have problem now when I change Target Inc is not change and other too like MECO Alt , VEL , FPA. can you fix it ? sorry to bother you
---------- Post added at 02:56 AM ---------- Previous post was at 02:19 AM ----------
Code:
Name=STS-26R
Orbiter=Discovery
OrbiterTexture=Discovery_original
ET=LWT
SRM=RSRM
LaunchSite=KSC
LaunchPad=LC-39B
LaunchPadType=1988
MLP=2
T0=47433.6506944444
TargetInc=28.500000
TargetLAN=0.000000
MECOAlt=109268.000000
MECOVel=7848.801000
MECOFPA=1.202536
PerformRollToHeadsUp=FALSE
OMSAssistEnable=FALSE
OMSAssistDuration=59.000
MaxSSMEThrust=104.0
ThrottleDown=792.000
ThrottleUp=1304.000
FRCSLoad=2473
LRCSLoad=2692
RRCSLoad=2692
LOMSLoad=6950
ROMSLoad=6981
UseRMS=FALSE
UseKUBand=TRUE
UseSTBDMPM=FALSE
UseODS=FALSE
UseExtAL=FALSE
UseTAA=FALSE
AftTAA=FALSE
HasBulkheadFloodlights=TRUE
HasDragChute=FALSE
HasPLBLiner=TRUE
Bridgerails=8,10,11
SILTS=FALSE
LogSSMEData=FALSE
UseCISS=FALSE
CISS_GPrime=FALSE
UseASE_IUS=TRUE
ASE_IUS_AftLocation=FALSE
InternalPRSDTankSets=3
HasEDOKit=FALSE
EDOPallets=0
HasOMSKit=FALSE
UpperStageName=IUS-7
PayloadVesselUpperStage=SSU_DemoSat
PayloadNameUpperStage=TDRS-C
PayloadAttachmentUpperStage=0
AdapterMesh=SSU\IUS\IUS_DemoSat_adapter
AdapterOffset=1.1833
AdapterMass=300
IUSLoadStage1=1
IUSLoadStage2=1
IUSRCSTanks=2
IUS4Antennas=FALSEGLS, I have problem now when I change Target Inc is not change and other too like MECO Alt , VEL , FPA. can you fix it ? sorry to bother you
Last edited:
GLS
Well-known member
Yes, the MECO parameters are not updated from the MECOTool tab, so they have to be copied from there to the mission file.
asdad
Member
ok thanks
Similar threads
