- Joined
- Mar 28, 2008
- Messages
- 2,666
- Reaction score
- 795
- Points
- 128
Ok, I have added one more parameter in PAPI and VASI params. See the CodePlex site for documentation.
Here are some examples: Also note that runway can have 12 PAPI lights and 2 VASI lights.
PAPI 5.0 3.0 257 3 ; Add PAPI lights in both sides of center line in both ends of the runway (total of 4 lights)
PAPI 20.0 3.0 -2000 0 0 ; Add PAPI light on center line in END1 of the runway
PAPI 20.0 3.0 -2000 3 1 ; Add PAPI lights on both side of the center line in END2 of the runway
Last parameter:
none = setup will be applied in both ends
0 = setup is applied in END1 only
1 = setup is applien in END2 only
The same logic applies in VASI lights.
Here are some examples: Also note that runway can have 12 PAPI lights and 2 VASI lights.
PAPI 5.0 3.0 257 3 ; Add PAPI lights in both sides of center line in both ends of the runway (total of 4 lights)
PAPI 20.0 3.0 -2000 0 0 ; Add PAPI light on center line in END1 of the runway
PAPI 20.0 3.0 -2000 3 1 ; Add PAPI lights on both side of the center line in END2 of the runway
Last parameter:
none = setup will be applied in both ends
0 = setup is applied in END1 only
1 = setup is applien in END2 only
The same logic applies in VASI lights.
Attachments
Last edited: