Add-ons working in Orbiter 2010 & 2010-P1

[ky]

I searched for a HI-RES LC39 for Orbiter 100830, I see the old one is for 06 only. Has anyone tryed it with 100830? The default launch pad sure is ugly.

Actually there is a tutorial showing how to replace the default launchpad with the one in slat's lc-39 edwards affb pack.I altered the package to install the launchpad without overwriting the canaveral.cfg.I'll put it up on orbit hanger with slat's permission.

 

[fort]

Vel hud works and for example with spacecraft's *ini as for OrionIII (in the velhud config file) from 2001 addon.

[ame="http://www.orbithangar.com/searchid.php?ID=3595"]Axial Velocity HUD v1.0 RC2[/ame]

------
LocationMFD ( Chris Knestrick, the author's of Attitude MFD ) works too. For the one wich still have it ( published in 2002 )...

A really simple jumpdrive in the Sol system. It will be interesting maybe to put it on OH. It was a time on the Chris Knestrick site but the link to it is broken.

 

[n0mad23]

I've just installed Orbiter 2010 and am delighted to report that the Ananke Tether-Sling V0.2 by Tblaxland and myself works fine in the new platform! I must say it's looking better than ever with the high rez Earth.

[ame="http://www.orbithangar.com/searchid.php?ID=3399"]http://www.orbithangar.com/searchid.php?ID=3399[/ame]

 

[ShuttleCommander]

Default LC 39 Ugly

Ky wrote in responce to FalconFlyer:

Actually there is a tutorial showing how to replace the default launchpad with the one in slat's lc-39 edwards affb pack.I altered the package to install the launchpad without overwriting the canaveral.cfg.I'll put it up on orbit hanger with slat's permission.

What I would like to know is. Which version of slat's lc 39 EAAB pack?
Where is the tutorial on Orbit Hanger?

 

[ky]

It's not on orbit hanger but here on O-F

---------- Post added at 02:35 PM ---------- Previous post was at 02:34 PM ----------

I mean the tutorial.

---------- Post added at 02:40 PM ---------- Previous post was at 02:35 PM ----------

This [ame="http://www.orbithangar.com/searchid.php?ID=3792"]one[/ame].

To use these pads,add these lines to canaveral.cfg:

; --- Pad 39A --- 
MESH	
	FILE STSmlp
	OWNMATERIAL
	POS -8943.8 30 6634.3
	ROT 90
	SHADOW
	PRELOAD
END
MESH		
	FILE STSpad39B
	OWNMATERIAL 
	POS -8877 46.5 6622
	ROT 180
	SHADOW
	PRELOAD
END
LPAD2A	; n.2
	POS -8936.2 0 6639.1
	ROT 90
	SCALE 0.0001
END

; --- Pad 39B --- 
MESH	
	FILE STSmlp
	OWNMATERIAL
	POS -11036.8 30 4999.3
	ROT 90
	SHADOW
	PRELOAD
END
MESH		
	FILE STSpad39B
	OWNMATERIAL 
	POS -10970 46.5 4987
	ROT 180
	SHADOW
	PRELOAD
END
LPAD2	; n.3
	POS -11029 0 5003.8
	ROT 180
	SCALE 0.001
	TEX Lpad02
END
; --- Press site --- 
MESH	
	FILE STSclock
	OWNMATERIAL
	POS -6065 7.5 2631
	ROT 40
	SHADOW
	PRELOAD
END

and take these lines out:

MESH ; Pad 39B tower
 FILE KSC_3
 POS -11830 0 5280
 ROT 178
 TEX Cape18
 SHADOW
 PRELOAD
END 
MESH ; Pad 39B base
 FILE KSC_4
 POS -11830 0 5280
 ROT 178
 TEX Cape19
 SHADOW
 PRELOAD
END
LPAD2
 POS -11001 0 5056
 ROT 90
 SCALE 0.1
 TEX Lpad02
END

 

[jedimaster1214]

Huh.....

I did that and the pads are still off....
I'll probably need to do a manual tweak to make them fit, right?
I used the welcome scenario to make sure the correct version of canaveral.cfg was being used.

 

[ky]

You might need to install med or high res KSC.

 

[jedimaster1214]

I shouldn't need to.... the med or hi-res KSC tiles are in the same position as the 2010 tiles (the color is just different). the pad positions that you posted above in canaveral.cfg are for Orbiter 2006.

Here's more threads where people have the same problem:
http://www.orbiter-forum.com/showthread.php?t=9887&highlight=Hi-Res+KSC+issue
http://www.orbiter-forum.com/showthread.php?t=815&highlight=Hi-Res+KSC+issue

In order for the pads to be fixed this:

 POS -11036.8 30 4999.3

will need to be fixed.

 

[ky]

It works for me and im using orbiter 2010p1 with med res ksc.The pads are in the correct position.

 

[jedimaster1214]

You must be some magic genie or something..............geez :beathead: :compbash:

 

[ShuttleCommander]

Default LC 39 Ugly

ky:

Thanks for your answer, but, after following the instructions, I get a CTD.:shrug:

I added Runway markers, lights, etc.

I have KSC Hi-res installed and it works when I don't copy over the canaveral.cfg file.

I am not sure which canaveral.cfg file you are refering to in your instructions, is it the one in config/earth/base or in config/earth/sts?

Sorry about the newb questions but I have never tried a multiple combination of addons before.

Also have Shuttle Fleet V4.7 installed which works great in 2010 P1 btw.

I have also read all of the above which showed up after my second post was accepted!!

 

[ky]

Config/Earth/Base

---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------

You must be some magic genie or something..............geez :beathead: :compbash:

lol :rofl:.It's almost a year since i've been using Orbiter so I've tried almost everything with surface bases

---------- Post added at 03:50 PM ---------- Previous post was at 03:47 PM ----------

Sorry about the newb questions but I have never tried a multiple combination of addons before.

No question is dumb,we were all clueless at one point using Orbiter.

 

[ShuttleCommander]

Got STS-117 scenario to work!

ky;

I got the STS-117 scenario to work with new pads, but Shuttle Fleet V4.7 scenarios just show the Shuttle in mid air, no pad!

Here is a screenshot of STS-117 on the new pad.



I now have the default Atlantis launch pad offset to the SW!



Can anyone please, please give me a clear explaination of how to fix this?

 

[ky]

Which canaveral.cfg did you put the lines in?It should be in Config/Earth/Base/Canaveral.cfg.

 

[ShuttleCommander]

Answer to ky's question.

ky asked:

Which canaveral.cfg did you put the lines in?It should be in Config/Earth/Base/Canaveral.cfg.

I put them in Config/Earth/Base/Canaveral.cfg.:thumbup:

 

[laminator]

SuborbMFD

SuborbMFD v2.1 [ame="http://www.orbithangar.com/searchid.php?ID=1367"]SuborbMFD v2.1[/ame] seems to work without problems too.
Tested with default DG and XR-1 on Moon with P1 & NG/D3D9

regards
Laminator

edit: there seems to be some sort of incompatibility with UMMU 2.0. I get a CTD when this MFD is activated in the Modules tab and I try to reenter the vessel to end an EVA.

 

[n0mad23]

Does anyone know if Urwumpe's Mayfly.dll works in Orbiter 2010? I just read through all 26 pages of this post, and it hasn't come up once. Such a wonderfully useful little module.

 

[ky]

Does anyone know if Urwumpe's Mayfly.dll works in Orbiter 2010? I just read through all 26 pages of this post, and it hasn't come up once. Such a wonderfully useful little module.

I'll test it.

 

[Interceptor]

Mars For Less V1.6 in 2010P1

Mars For Less V1.6
Does this addon work in orbiter 2010P1,I seem to remember reading somewhere that it's not compatible in 2010,but am not sure,I also read that you can't find some of the addons for it anymore.is there any truth to this.Thanks

 

[spacman]

Mercury 5.0

Has any one been able to use Mercury 5.0 in Orbiter 2010? If not is an update coming. Thanks